Export limit exceeded: 414288 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 21448 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (45420 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-114388 | 1 Chamilo | 1 Chamilo Lms | 2026-10-21 | 5.3 Medium |
| Chamilo LMS 2.0.0 pre-releases from 2.0.0-alpha.1 before 2.0.0-RC.3 contain a missing access control vulnerability in GradebookController that allows unauthenticated users to modify gradebook certificates. Attackers can request the set_default_certificate endpoint with any course id and document id to tamper with certificate configuration for any course. | ||||
| CVE-2026-89719 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix out-of-bounds access in read_block_state() read_block_state() calculates nr_pages before taking dev_lock. If the device is reset and reinitialized with a smaller disksize before lock acquisition, nr_pages still describes the old table. The subsequent loop can then call slot_lock() past the end of the newly allocated table. Read disksize after acquiring dev_lock and checking that the device is initialized. The read lock then keeps the table and its bound stable for the duration of the scan. | ||||
| CVE-2026-89682 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix fcache_disposal UAF by inlining dispose state into nfsd_net nfsd_file_dispose_list_delayed() defers fput() to nfsd service threads via a per-net freeme queue, preventing the shrinker and GC worker from bearing the cost of closing files (see ffb402596147). However, the queue lives in a separately-allocated struct nfsd_fcache_disposal that is freed by nfsd_free_fcache_disposal_net() during per-net teardown. The global shrinker, laundrette, and fsnotify callbacks can still be inside nfsd_file_dispose_list_delayed() dereferencing that pointer, causing a use-after-free. Inline the spinlock and freeme list directly into struct nfsd_net (as fcache_dispose_lock and fcache_dispose_list), eliminating the separately allocated struct nfsd_fcache_disposal entirely. These fields now have the same lifetime as the net namespace itself, so there is no dangling pointer to chase. nfsd_file_cache_start_net() now just initializes the inline fields and cannot fail due to allocation. nfsd_file_cache_shutdown_net() drains the inline list directly instead of freeing a separate struct. The alloc/free helpers are removed. | ||||
| CVE-2026-89676 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix stale s2s_cp_stateids IDR entry for async COPY For an async COPY, nfsd4_copy() called nfs4_init_copy_state() before dup_copy_fields(), so the s2s_cp_stateids IDR was pointed at &u->copy->cp_stateid -- memory in the per-rqstp COMPOUND buffer that is reused by the next request. dup_copy_fields() copies only the value into async_copy, so the IDR slot dangled at the transient buffer for the whole background copy. Any IDR walker then dereferences reused request memory: the laundromat reads cs_type from it and, if the bytes look like an expired NFS4_COPYNOTIFY_STID, follows into refcount_dec()/idr_remove()/kfree() on garbage; manage_cpntf_state() has the same exposure via idr_find(). Duplicate the fields first, then register the stateid on the stable async_copy. result->cb_stateid is unchanged. | ||||
| CVE-2026-89659 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during delegation revoke A delegation stateid holds only a bare pointer to its owning nfs4_client and does not keep it alive. The client survives its stateids only because __destroy_client() drains cl_delegations and cl_revoked before free_client() runs. nfs4_laundromat() breaks that invariant: it unhashes an expired delegation from cl_delegations, drops deleg_lock, then revoke_delegation() relinks it onto cl_revoked under cl_lock. In that window the delegation is on neither list, so client_has_state() can report no remaining state. Every teardown path first requires cl_rpc_users to be zero, but the laundromat holds no such reference. A client whose recalled delegation has just timed out can therefore reach free_client() while revoke_delegation() is still about to dereference cl_lock, a use-after-free. Pin the client with cl_rpc_users across the revoke so teardown blocks until it completes, then reap the delegation from cl_revoked. A client already expiring reaps its own, so skip it and leave the delegation on del_recall_lru. | ||||
| CVE-2026-89647 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: do not repeat ceph_trim_dentries() if no progress possible ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its `nr_to_scan` budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (`count==0`) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns `-EAGAIN`, only to be queued again immediately. The dir-lease walk made this worse. When `expire_dir_lease` is `false` (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH` moves the dentry to the tail of the list and resets `di->time` via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN` requeue. Fix this in three steps: - Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is `false`. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via `STOP` at the first fresh lease). - Only return `-EAGAIN` from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead. - After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (`count==0`). There is no reason to keep retrying when we are not over the cap limit and made no progress. Under real cap pressure (`count>0`) the reclaim path is unchanged and still retries via `-EAGAIN`. Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in `/proc/lock_stat` (5 minute capture): class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00 ----------------------- &mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 ----------------------- &mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 With this patch: class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27 ----------------------- &mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated--- | ||||
| CVE-2026-89624 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: universal-pidff: stop the device when force-feedback init fails universal_pidff_probe() starts the device with hid_hw_start() and then, if force-feedback initialisation fails, returns the error through a label that only does "return error". The device is left started. The HID core does not unwind on the driver's behalf. __hid_device_probe() releases the devres group, closes the report and clears hdev->driver: if (ret) { devres_release_group(&hdev->dev, hdev->devres_group_id); hid_close_report(hdev); hdev->driver = NULL; } The hidraw character device that hid_hw_start() registered through hid_connect() is allocated with kzalloc() and added with cdev_device_add(), so it is not devres-managed and survives that. With hdev->driver NULL, hid_device_remove() skips hid_hw_stop() as well, because it only unwinds while a driver is still attached. The registration therefore outlives the device on both paths. Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports a use-after-free write from hidraw_open() -> hid_hw_open() -> the transport's open callback, which takes a spinlock inside the freed object. A descriptor that carries a PID usage page and no input reports is enough: hidraw claims the device so hid_hw_start() succeeds, while hid->inputs stays empty so force-feedback init fails. The other failure returns in hid_pidff_init_with_quirks() - no output reports, an allocation failure, pidff_init_fields(), pidff_check_autocenter(), an unusable effect count, input_ff_create() - all reach the same label. Stop the device on that path. hid-dr.c and hid-emsff.c, which start the device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do this. The two earlier gotos must keep returning without hid_hw_stop(), since neither has a started device, so give the path that fails after the start its own label. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-89622 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in mcp->rxbuf for the duration of a transfer but never clears it when the transfer finishes or times out. Once the caller frees or reuses the buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to memcpy device data into the freed memory, causing a write use-after-free. Route all return paths through a single exit point that clears mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard in the raw_event handler can reject any report arriving after the transfer has ended. | ||||
| CVE-2026-89601 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext2: Fix lost inode updates for IS_SYNC inodes ext2_setsize() and ext2_xattr_set2() had a construct like: if (IS_SYNC(inode)) { sync_inode_metadata(inode, 1); } else { mark_inode_dirty(inode); } which leads to lost inode updates for IS_SYNC inodes because sync_inode_metadata() does anything only if the inode is already dirty and hence inode updates may be simply lost. Fix the problem by unconditionally marking the inode dirty and *then* call sync_inode_metadata(). | ||||
| CVE-2026-89567 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: bound shrinker scans by examined checkpoint buffers The jbd2 shrinker currently accounts only checkpoint buffers that it successfully releases against nr_to_scan. Busy buffers therefore do not consume the scan budget. If a checkpoint transaction contains mostly busy buffers, the shrinker can scan its entire checkpoint list while holding journal->j_list_lock. Large checkpoint lists can result in excessive lock hold times and leave other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls. Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for every buffer examined, including busy buffers. Pass NULL from checkpoint cleanup paths so their existing full-list behavior is preserved. This restores the scan-budget semantics that existed before journal_shrink_one_cp_list() was changed to always scan a complete checkpoint list. | ||||
| CVE-2026-89564 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip: orphan prefetched skbs before multicast forwarding IPv4 and IPv6 input preserve an skb->sk association installed by bpf_sk_assign() so that local delivery can use the selected socket under RCU. Both address families can also prefetch a socket in UDP early demux. In both paths (BPF and UDP early demux) a reference is not guaranteed to be held on the socket. When a multicast packet is not locally deliverable, IPv6 hands the original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the original skb when local delivery is not needed. Either path can put the skb on an unresolved multicast route queue or forward it after the receive-side RCU section ends. After the prefetched socket is destroyed, a later skb free invokes sock_pfree() and dereferences the stale skb->sk. Orphan the skb before each non-local multicast forwarding path. Local delivery retains the original skb; the existing skb_clone() calls provide multicast forwarding with a socket-free clone. | ||||
| CVE-2026-89543 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix use-after-free in __rpc_clnt_handle_event and __rpc_clnt_remove_pipedir Normal client creation goes through rpc_setup_pipedir(), which records clnt->pipefs_sb, but the mount-event path in __rpc_clnt_handle_event() calls rpc_setup_pipedir_sb() directly and never refreshes that field. The umount path also removes the directory without clearing clnt->pipefs_sb. After a late pipefs mount or any remount, rpc_clnt_remove_pipedir() compares the current superblock against a stale pipefs_sb pointer and skips cleanup, leaving pipefs dentries whose inode private data still points at a freed rpc_clnt, leading to a potential use-after-free during subsequent rpc_info_open() or rpc_show_info() calls. Fix this by properly updating clnt->pipefs_sb upon mount events and clearing it during unmount or failure paths. | ||||
| CVE-2026-89534 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE, it creates a replacement listener cm_id and returns 1, telling the CM core to destroy the old one. If the replacement allocation fails, sc_cm_id still points at the old cm_id that the CM core is about to destroy. Any subsequent dereference of sc_cm_id -- such as svc_rdma_detach()'s rdma_disconnect() call -- is a use-after-free. NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s rdma_disconnect() call against NULL so that the listener can be torn down safely when the server shuts down. | ||||
| CVE-2026-89467 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: fix use-after-free qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service comes up, and the worker recovers battmgr through container_of() to issue firmware requests. The PMIC GLINK client stays on the client list until its devres release action runs, so a PDR notification can keep queueing the work, and a pending or running worker can access battmgr after devres frees it. Make enable_work device-managed with devm_work_autocancel(), registered before the PMIC GLINK client is allocated. The devres cleanup then releases the client first, so no further notification can queue the work, and cancels the work before battmgr is freed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89452 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/msm: Unwind probe state on registration failure msm_iommu_probe() adds its devm-managed IOMMU object to qcom_iommu_devices before adding the IOMMU sysfs device and registering it with the IOMMU core. If iommu_device_sysfs_add() fails, probe returns with the object still on qcom_iommu_devices. The driver core then releases the devm allocation, leaving a dangling list entry that later list walks may dereference. If iommu_device_register() fails, the same dangling list entry remains and the sysfs device is left registered as well. Unwind the sysfs device and global list entry in reverse setup order on the corresponding failure paths. | ||||
| CVE-2026-89441 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: cancel card-detect work on remove Disabling the device interrupt and freeing the IRQ prevents new card-detect work from being queued, but carddet_work already queued by the handler can still run after via_sd_remove() returns. via_sdc_card_detect() recovers the host through container_of() and dereferences its MMIO base; once remove() returns the host can be freed, so that work would touch freed memory. Cancel carddet_work after freeing the IRQ and before cancelling finish_bh_work, which the card-detect handler can also queue. carddet_work can re-enable the interrupt through via_reset_pcictrl(); mask it again afterwards. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-80947 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop rtl8xxxu arms rx_urb_wq from the RX completion path: rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which queues it on rx_urb_pending_list and, once the list grows past RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(), which anchors it on rx_anchor and dereferences priv->udev. rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog, update_beacon_work) but never cancels rx_urb_wq, so a worker armed during the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv, producing a use-after-free. The window opens under active RX traffic (pending count above the watermark) followed by a disconnect. There are two teardown races to close: * rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock but called schedule_work() after dropping the lock. A completion that observed shutdown == false and released the lock could then call schedule_work() after rtl8xxxu_stop() had set shutdown and cancel_work_sync() had already returned, arming the worker to run after the teardown. Move schedule_work() under the same !shutdown branch so the arming decision is atomic with the shutdown check. * rtl8xxxu_rx_urb_work() anchors every URB it drained back onto rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a URB that escaped the kill. In rtl8xxxu_stop(), call cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is drained first. After priv->shutdown is set under rx_urb_lock, completions can no longer queue rx_urb_wq. cancel_work_sync() then drains the last queued or running worker, and the following usb_kill_anchored_urbs() kills the URBs it may have submitted. rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw() guarantees .stop() runs for a live interface before ieee80211_free_hw() frees priv. The probe error path needs no cancel: rx_urb_wq is INIT_WORK()'d there but cannot have been scheduled, since no URB is submitted before ieee80211_register_hw() succeeds. This bug was found by static analysis. | ||||
| CVE-2026-91668 | 1 Oracle | 1 Data Integrator | 2026-10-21 | 8.8 High |
| Vulnerability in the Oracle Data Integrator product of Oracle Fusion Middleware (component: Dictionary Repository). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via SQL to compromise Oracle Data Integrator. Successful attacks of this vulnerability can result in takeover of Oracle Data Integrator. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-80695 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (sht3x) Fix unaligned accesses Sashiko reports: In sht3x_update_client(), the 16-bit temperature and humidity values are extracted from a stack-allocated byte array using be16_to_cpup(). The pointers passed to this function are calculated as buf and buf + 3. Since the difference between the two pointers is an odd number of bytes, at least one of them is guaranteed to be at an unaligned offset. This will trigger an alignment fault on strict-alignment architectures such as ARMv5 or SPARC, resulting in a kernel panic. Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(), and put_unaligned_be16() instead of cpu_to_be16(). | ||||
| CVE-2026-80694 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq cookie), but mtk_poll_controller incorrectly passed the net_device *. Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled would then crash. | ||||