| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in D-Link DIR-600L 2.17b02. Affected is the function genacgi_main of the file gena.cgi of the component GENA Handler. Such manipulation leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. |
| A flaw was found in Vim's netrw plugin. A crafted filename containing quote characters and expression fragments can break out of the quoted context during mark/unmark operations, allowing arbitrary Vimscript execution. This can be leveraged to run shell commands with the privileges of the user running Vim. |
| Unexpected Status Code or Return Value vulnerability in ninenines gun (gun_http module) allows a malicious HTTP server to force the client into raw protocol mode via an unsolicited 101 Switching Protocols response.
In gun_http:handle_inform/8, when a 101 Switching Protocols response is received over HTTP/1.1, the function verifies only that the Upgrade header is syntactically valid and that the stream reference is a plain reference(). It does not check whether the client ever sent an Upgrade or Connection: upgrade header on the corresponding request. Because this check is absent, any 101 response (solicited or not) causes gun to dispatch a gun_upgrade message to the caller and transition the entire connection to raw protocol mode.
A malicious or compromised HTTP server can send an unsolicited 101 response to any HTTP/1.1 request, causing the gun client to abandon HTTP framing for that connection. Once in raw mode, gun_raw applies no flow control (flow=infinity) and re-arms socket active mode after every received packet, so the server can flood the client with arbitrary bytes. These are forwarded as unbounded gun_data messages to the owner process, exhausting its mailbox and BEAM memory, ultimately crashing the VM.
This issue affects gun: from 2.0.0-pre.1 before 2.4.0. |
| A flaw was found in cifs-utils. This flaw allows an unprivileged local user to achieve privilege escalation. When a privileged service mounts a Common Internet File System (CIFS) share using a user-controlled credentials file, input values are not properly sanitized before being assembled into mount options. A local attacker can exploit this vulnerability to inject unauthorized mount options, allowing them to bypass permission checks and execute files with administrative (root) privileges. |
| Uncontrolled Resource Consumption vulnerability in ninenines gun (gun_http module) allows a malicious server to exhaust client memory via unbounded HTTP/1.1 response buffering.
In gun_http:handle/5, three clauses accumulate incoming TCP data into the connection's buffer field using binary concatenation with no upper-bound check: the head clause appends data until the \r\n\r\n header terminator is found; the body_chunked clause appends data whenever cow_http_te:stream_chunked/2 returns a more result indicating an incomplete chunk boundary; and the body_trailer clause appends data until the trailing \r\n\r\n is found. In each case, when the expected terminator never arrives, the enlarged binary is stored back into state and the process waits for more data, with no configurable or hard-coded ceiling on buffer size.
A malicious or compromised server can exploit this by sending a partial response that never completes. For example, a response may begin with HTTP/1.1 200 OK\r\nX-Pad: followed by an unbounded stream of arbitrary bytes, never sending the header terminator. The gun connection process will continuously append the incoming data to its buffer, causing unbounded heap growth. Because BEAM imposes no per-process heap limit by default, a single malicious connection can exhaust all available memory on the node, causing a node-wide out-of-memory crash.
This issue affects gun: from 1.0.0-pre.1 before 2.4.0. |
| Origin Validation Error vulnerability in ninenines gun (gun_http2 module) allows cross-origin cookie injection via unvalidated HTTP/2 PUSH_PROMISE authority.
In gun_http2:push_promise_frame/7, the :authority pseudo-header from an incoming PUSH_PROMISE frame is stored verbatim into the promised stream record without checking that it matches the connection's origin. When gun_http2:headers_frame/9 later processes the response headers for the promised stream, it calls gun_cookies:set_cookie_header/7 with the unvalidated server-supplied authority before any status branching and before user code can act. This violates RFC 7540 §10.6 / RFC 9113 §8.4, which require receivers to treat as a protocol error any push for a resource the server is not authoritative for.
A malicious or compromised HTTP/2 server can plant cookies scoped to arbitrary third-party domains into the client's shared cookie store. This enables session fixation attacks against those domains and, if the planted cookie overrides a legitimate session token, may result in account takeover. No user interaction beyond making a normal HTTP/2 request to the attacker-controlled server is required.
This issue affects gun: from 2.0.0-pre.2 before 2.4.0. |
| A flaw was found in Red Hat Ansible Automation Platform's automation-
controller. Four debug views that trigger the internal task, dependency, and
workflow schedulers are configured to allow any user (including unauthenticated
clients) and are routed in production builds because their URL include is not
gated on the debug setting. An unauthenticated remote attacker can repeatedly
invoke these endpoints to acquire the cluster-wide scheduler advisory lock;
because the legitimate scheduler acquires the same lock without waiting, the
attacker causes real scheduler runs to be skipped, stalling job dispatch for
all tenants, while also consuming controller web workers. The debug root view
additionally discloses the list of debug endpoints to unauthenticated callers. |
| Allocation of Resources Without Limits or Throttling vulnerability in phenixdigital phoenix_storybook allows unauthenticated denial of service via atom table exhaustion. LiveView event handlers and request parameters of the storybook convert client-supplied strings to atoms. Atoms are never garbage-collected, so a client that sends enough unique strings fills the atom table, and the BEAM node terminates.
PhoenixStorybook.ExtraAssignsHelpers.handle_set_variation_assign/3 and handle_toggle_variation_assign/3 call String.to_atom/1 on parameter keys, attribute names, variation ids, and values of attributes declared as :atom or :boolean. PhoenixStorybook.Story.Playground.handle_event/3 and PhoenixStorybook.StoryLive do the same for tab names, theme names, and playground field names. Releases published as phx_live_storybook have the same calls in the PhxLiveStorybook namespace, at first in PhxLiveStorybook.EntryLive.
This issue affects phoenix_storybook: from 0.5.0 before 1.1.0; phx_live_storybook: from 0.2.0 onward. |
| A flaw has been found in H3C ICG2000 Unified Communication Gateway 2023. This issue affects some unknown processing of the file /wnm/check.j of the component Web Management Module. Executing a manipulation can lead to missing authentication. The attack may be performed from remote. The exploit has been published and may be used. Upgrading to version R9141PXX is capable of addressing this issue. It is recommended to upgrade the affected component. The vendor confirms: "We have confirmed this issue is a known issue and has been fixed in R9141PXX versions." |
| Code Injection vulnerability in phenixdigital phoenix_storybook allows unauthenticated remote code execution via HEEx template injection in the component playground. A client can send attribute values over the playground WebSocket. A value that closes the attribute quote and adds a HEEx expression is evaluated as Elixir code on the server.
PhoenixStorybook.Story.PlaygroundPreviewLive.handle_event/3 accepts attribute names and values from the client and stores them through PhoenixStorybook.ExtraAssignsHelpers.handle_set_variation_assign/3. PhoenixStorybook.Rendering.ComponentRenderer.attributes_markup/1 interpolates string values into a HEEx template without escaping. The template is compiled with EEx.compile_string/2 and evaluated. Releases published as phx_live_storybook have the same code in the PhxLiveStorybook namespace, where the first client entry point is PhxLiveStorybook.Entry.Playground.handle_event/3.
This issue affects phoenix_storybook: from 0.5.0 before 1.1.0; phx_live_storybook: from 0.3.0 onward. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Only accept connection responses to outstanding requests
An outgoing channel waits in BT_CONNECT until security
and the feature mask exchange complete, and only then
sends its connection request. A peer can answer it
before that with a connection response matching our
source CID. The channel then moves to BT_CONFIG,
completes configuration and becomes connected before
security has completed. If security then fails,
l2cap_security_cfm() leaves the connected channel
alone, so it stays up on a link that did not reach
the required security level.
A connection response with a zero source CID is
matched by identifier. Another channel can hold the
same identifier for a response it still has to send,
so the lookup can pick the wrong channel.
Only accept a connection response while our request
is outstanding, and only look at such channels when
matching by identifier. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: stop registering with rpcbind after a failure in listener_set
nfsd_nl_listener_set_doit() calls svc_xprt_create_from_sa() once for each
requested listener and passes flags of 0, so every listener registers with
rpcbind on its own. A rpcbind that accepts the connection and never replies
therefore costs one timeout for each entry. With the cap of 1024 entries
the request can hold nfsd_mutex for about 34 minutes, which is roughly 17
times the hung-task threshold.
One failure is enough to know that the next call will not fare better.
Read svc_rpcb_failure_count() before the create loop, and pass
SVC_SOCK_ANONYMOUS for the rest of the request once the count moves. |
| In the Linux kernel, the following vulnerability has been resolved:
block: restore the iterator when rejecting a misaligned bio
bio_iov_iter_get_pages() can extract some iovecs before encountering a
misaligned one. It releases the pages and rejects the entire bio, but
leaves the supplied iterator advanced.
An iomap direct-I/O caller may subsequently reexpand the iterator's
byte count and fall back to buffered I/O. The reexpanded count then
includes bytes before the iterator's current segment, potentially
causing iterate_iovec() to read beyond the imported iovec array.
In a reproducer using an initial empty iovec followed by 10-byte and
1015-byte segments, writev() returned 1015 instead of 1025 and KASAN
reported an 8-byte read beyond the nine-element iovec allocation.
Saving and restoring the iterator on the rejected-bio path makes
writev() return 1025 and eliminates the KASAN report.
Restore the entire iterator rather than reverting a byte count:
advancing past an empty segment changes its position without consuming
any bytes.
Leave successful and partially accepted bio paths unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Validate FFH register fields before hardware access
The x86 CPPC FFH accessors construct masks and shift values using the
firmware's Bit Width and Bit Offset without checking that the field fits
in an MSR. A zero-width field or a field extending beyond bit 63 can
therefore cause an invalid shift. The safe MSR accessors only handle an
access fault, not invalid field arithmetic after a successful read.
Also, the 64-bit GAS address is implicitly narrowed to the 32-bit MSR
number. A descriptor with nonzero upper address bits can access a different
MSR from the one described by firmware.
The arm64 AMU counter readers have the same unchecked field arithmetic.
Validate the field bounds before reading a counter, including both
descriptors in the paired counter path.
Dispatch FFH accesses before decoding the GAS Access Size in the common
read and write paths. Otherwise, a large access_width can trigger an
invalid shift in GET_BIT_WIDTH() before the architecture validates its
register. That field has architecture-specific FFH semantics and is not
needed by the generic memory/port accessor on this path.
Validate x86 MSR addresses and share the field-bounds checks between
related accessors within each architecture. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: retry inexact policy lookup after node reinsertion
An inexact policy lookup first records pointers to candidate hlist heads
and then traverses the lists. A concurrent policy insertion can merge
inexact tree nodes between those operations:
lookup policy insertion
------ ----------------
find inexact candidates
save obsolete hlist head
write_seqcount_begin(&bin->count)
merge inexact tree nodes
hlist_del_rcu(&policy->bydst)
reinsert policy->bydst in survivor
write_seqcount_end(&bin->count)
evaluate saved candidate list
miss the moved policy
The merge immediately reinserts the same hlist node into the surviving
tree node. RCU keeps the policy alive, but it does not provide a
consistent view while its list node is moved. A lookup that selected the
obsolete list can observe it empty. A lookup already traversing a moved
policy can instead follow the next pointer rewritten by the reinsertion.
Either case can return an incorrect IPsec policy result.
The per-bin sequence counter already brackets calls to
xfrm_policy_inexact_insert_node(), including node merges. The read side,
however, currently validates the counter only while searching an
individual rb-tree. A successful search returns without validation, and
the later candidate-list traversal is outside that read-side section.
Snapshot the per-bin sequence before discovering candidate heads and
validate it after evaluating all candidate lists. Retry the lookup if
the inexact policy tree changes while it is being searched. |
| In the Linux kernel, the following vulnerability has been resolved:
9p/xen: fix refcount leak in p9_xen_response() on wrong tag
p9_xen_response() looks up the request for an incoming reply with
p9_tag_lookup(), which takes a reference on the returned p9_req_t. When
the tag does not resolve to a request in REQ_STATUS_SENT, the function
warns and continues the loop without dropping that reference, permanently
leaking the p9_req_t and its msize buffers. The reply header, including
the tag, is supplied by the backend, so a malicious or buggy 9P backend
can leak kernel memory on every crafted response.
Drop the reference before continuing. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: always reset completion when disconnecting
When some tx or rx transfers were pending while closing the connection,
the completion handler could catch one pending completion call. To
ensure a normal start when mounting again, we have to reset the
completion and flush any pending completions. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: remove bogus context initialization in alloc_requests
alloc_requests() initializes usb9pfs->in_req->context to point at the
struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites
this with the real struct p9_req_t pointer before every transmit, and
usb9pfs_tx_complete() clears it back to NULL after each completion, so
in_req->context only ever holds a valid p9_req_t once a request has
actually been queued.
usb9pfs_clear_tx(), however, can run at any time (mount close, gadget
disable) independent of whether a request was ever queued. If it runs
before the first usb9pfs_transmit(), it reads the leftover sentinel
value, type-confuses the struct f_usb9pfs pointer as a struct
p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and
hands it to p9_client_cb(), which manipulates req->wq and req->refcount
at bogus offsets inside f_usb9pfs. This reliably corrupts memory or
panics whenever the transport is torn down before any 9p request has
been transmitted, e.g. mounting and immediately unmounting, or a cable
disconnect racing the very first request.
usb9pfs->out_req->context is set the same way but is never read by
this transport (usb9pfs_rx_complete() identifies the instance via
ep->driver_data instead), so it serves no purpose either.
Both endpoints' ->driver_data are already set to usb9pfs in
enable_endpoint(), which is what the completion handlers actually use
to recover the f_usb9pfs instance. Just drop the leftover
->context assignments; usb_ep_alloc_request()/alloc_ep_req() already
return zeroed requests, so in_req->context correctly starts out NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: clear stale client pointer on close
p9_usbg_close() tears down the client transport, but usb9pfs keeps
using usb9pfs->client from asynchronous TX and RX completion handlers.
A late completion can therefore dereference a client that has already
been freed during mount teardown.
Clear usb9pfs->client under usb9pfs->lock when closing the transport,
detach any pending TX request from in_req->context, and make the TX/RX
completion handlers bail out once the transport has been detached. This
keeps late completions from touching a freed or rebound p9_client. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_crtc: ensure dma_fence_ops remain valid during device unbind
In [1], sashiko reported the following issue:
=== snip ===
Looking at how these fences are managed, drm_crtc_create_fence()
creates a dma_fence without taking a reference to the drm_device or
drm_crtc. Because the sync_file framework exposes this fence to
userspace, the fence can outlive the CRTC.
The dma_fence contract requires that data accessed by dma_fence_ops
(like get_driver_name) must remain valid for an RCU grace period after
the fence is signaled. However, drm_crtc_cleanup() and the subsequent
freeing of the device do not wait for an RCU grace period via
synchronize_rcu().
If userspace calls ioctl(SYNC_IOC_FILE_INFO) concurrently with a device
hot-unplug:
CPU1 (Userspace)
sync_file_get_name()
ops = rcu_dereference(fence->ops);
if (!dma_fence_test_signaled_flag())
// Preempted or delayed here
CPU2 (Driver Teardown)
Signals the fence (setting fence->ops = NULL)
Destroys and frees the CRTC without waiting for an RCU grace period
CPU1 (Resumes)
ops->get_driver_name(fence) -> drm_crtc_fence_get_driver_name()
crtc = fence_to_crtc(fence); // Casts to the freed CRTC
return crtc->dev->driver->name; // Use-after-free
...
Does the CRTC or DRM device need to be kept alive for the RCU grace
period, or should the fence hold a proper reference to prevent the
use-after-free when get_driver_name() and get_timeline_name() access
the freed CRTC structure?
=== snap ===
I believe this to be a correct observation and this patch implements
the suggestion of waiting for an RCU grace period before proceeding
with destruction of the drm_crtc, so that get_driver_name() and
get_timeline_name() can still work. |