| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Cisco Catalyst Center Virtual Appliance could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected system.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to perform unauthorized modifications to the system, including creating new user accounts or elevating their own privileges on an affected system. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. |
| A vulnerability in the access control list (ACL) processing of IPv4 packets of Cisco SD-WAN vEdge Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to the improper enforcement of the implicit deny all at the end of a configured ACL. An attacker could exploit this vulnerability by attempting to send unauthorized traffic to an interface on an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| The Pie Register - Social Sites Login (Add on) plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.7.7. This is due to insufficient verification on the user being supplied during a social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. |
| Arc before 2024-08-26 allows remote code execution in JavaScript boosts. Boosts that run JavaScript cannot be shared by default; however (because of misconfigured Firebase ACLs), it is possible to create or update a boost using another user's ID. This installs the boost in the victim's browser and runs arbitrary Javascript on that browser in a privileged context. NOTE: this is a no-action cloud vulnerability with zero affected users. |
| A vulnerability in the implementation of access control rules for loopback interfaces in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should have been blocked to a loopback interface.
This vulnerability is due to improper enforcement of access control rules for loopback interfaces. An attacker could exploit this vulnerability by sending traffic to a loopback interface on an affected device. A successful exploit could allow the attacker to bypass configured access control rules and send traffic that should have been blocked to a loopback interface on the device. |
| A vulnerability was identified in jackying H-ui.admin up to 3.1. This affects an unknown function in the library /lib/webuploader/0.1.5/server/preview.php. The manipulation leads to unrestricted upload. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced.
Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided.
This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake.
The issue affects versions up to and including 5.8.2. |
| Improper access control for some Intel(R) Graphics software may allow an authenticated user to potentially enable denial of service via local access. |
| A vulnerability in the application software of multiple Radiometer products may allow remote code execution and unauthorized device management when specific internal conditions are met. Exploitation requires that a remote connection is established with additional information obtained through other means. The issue is caused by a weakness in the analyzer’s application software. Other related CVE's are CVE-2025-14095 & CVE-2025-14096. Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required Configuration for Exposure: Affected application software version is in use and remote support feature is enabled in the analyzer. Temporary work Around: If the network is not considered secure, please remove the analyzer from the network. Permanent solution:
Customers should ensure the following:
• The network is secure, and access follows best practices.
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept (PoC). Radiometer is not aware of any publicly available exploits at the time of this publication. |
| A "Privilege boundary violation" vulnerability is identified affecting multiple Radiometer Products. Exploitation of this vulnerability gives a user with physical access to the analyzer, the possibility to gain unauthorized access to functionalities outside the restricted environment. The vulnerability is due to weakness in the design of access control implementation in application software.
Other related CVE's are CVE-2025-14096 & CVE-2025-14097.
Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required configuration for Exposure:
Physical access to the analyzer is needed.
Temporary work Around:
Only authorized people can physically access the analyzer.
Permanent solution:
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept. Radiometer is not aware of any publicly available exploit at the time of publication. Note:
CVSS score 6.8 when underlying OS is Windows 7 or Windows XP Operating systems and CVSS score 5.7 when underlying OS is Windows 8 or Windows 10 operating systems. |
| A flaw was found in the Keycloak Admin REST API. This vulnerability allows the exposure of backend schema and rules, potentially leading to targeted attacks or privilege escalation via improper access control. |
| The Social Login Lite For WooCommerce plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.6.0. This is due to insufficient verification on the user being supplied during the social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. |
| An issue in TheGreenBow Windows Standard VPN Client 6.87.108 (and older), Windows Enterprise VPN Client 6.87.109 (and older), Windows Enterprise VPN Client 7.5.007 (and older), Android VPN Client 6.4.5 (and older) VPN Client Linux 3.4 (and older), VPN Client MacOS 2.4.10 (and older) allows a remote attacker to execute arbitrary code via the IKEv2 Authentication phase, it accepts malformed ECDSA signatures and establishes the tunnel. |
| Improper Authentication vulnerability in TYPO3 Extension "Modules" codingms/modules.This issue affects Extension "Modules": before 4.3.11, from 5.0.0 before 5.7.4, from 6.0.0 before 6.4.2, from 7.0.0 before 7.5.5. |
| A vulnerability was identified in newbee-mall-plus up to 2.4.1. This vulnerability affects the function executeSeckill of the file /seckillExecution/. The manipulation of the argument userid leads to authorization bypass. It is possible to initiate the attack remotely. The attack is considered to have high complexity. It is stated that the exploitability is difficult. The exploit is publicly available and might be used. |
| The web server of affected devices do not properly authenticate user request to the '/ClientArea/RuntimeInfoData.mwsl' endpoint. This could allow an unauthenticated remote attacker to gain knowledge about current actual and configured maximum cycle times as well as about configured maximum communication load. |
| A vulnerability was found in Apeman ID71 218.53.203.117. The impacted element is an unknown function of the file /onvif/device_service of the component ONVIF Service. Performing manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in zhuimengshaonian wisdom-education up to 1.0.4. This vulnerability affects the function selectStudentExamInfoList of the file src/main/java/com/education/api/controller/student/ExamInfoController.java. Such manipulation of the argument subjectId leads to improper authorization. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. |
| matrix-js-sdk is the Matrix Client-Server SDK for JavaScript and TypeScript. In matrix-js-sdk versions versions 9.11.0 through 34.7.0, the method `MatrixClient.sendSharedHistoryKeys` is vulnerable to interception by malicious homeservers. The method was introduced by MSC3061) and is commonly used to share historical message keys with newly invited users, granting them access to past messages in the room. However, it unconditionally sends these "shared" keys to all of the invited user's devices, regardless of whether the user's cryptographic identity is verified or whether the user's devices are signed by that identity. This allows the attacker to potentially inject its own devices to receive sensitive historical keys without proper security checks. Note that this only affects clients running the SDK with the legacy crypto stack. Clients using the new Rust cryptography stack (i.e. those that call `MatrixClient.initRustCrypto()` instead of `MatrixClient.initCrypto()`) are unaffected by this vulnerability, because `MatrixClient.sendSharedHistoryKeys()` raises an exception in such environments. The vulnerability was fixed in matrix-js-sdk 34.8.0 by removing the vulnerable functionality. As a workaround, remove use of affected functionality from clients. |
