| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes()
svdm_consume_modes() checks pmdata->altmodes against the array size once
before the loop over the count, but forgot to check the bound at every
point in the loop.
In the well-behaved SVDM discovery flow this is harmless because each of
at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX
modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the
CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming
ACK with any request the port actually sent. Once port->partner is set,
an unsolicited Discover Modes ACK is consumed unconditionally. A broken
or malicious port partner can therefore drive altmodes to
ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra
Discover Modes ACK with seven VDOs. Because the pre-loop check passes,
the loop could then writes up to five entries past altmode_desc[]. For
mode_data_prime the next field in struct tcpm_port is the
partner_altmode[] pointer array, which then receives partner-chosen
SVID/VDO bytes.
Move the bound check inside the loop so the array can never be indexed
past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner
supplies or how the function was reached. |
| In the Linux kernel, the following vulnerability has been resolved:
gcov: use atomic counter updates to fix concurrent access crashes
GCC's GCOV instrumentation can merge global branch counters with loop
induction variables as an optimization. In inflate_fast(), the inner copy
loops get transformed so that the GCOV counter value is loaded multiple
times to compute the loop base address, start index, and end bound. Since
GCOV counters are global (not per-CPU), concurrent execution on different
CPUs causes the counter to change between loads, producing inconsistent
values and out-of-bounds memory writes.
The crash manifests during IPComp (IP Payload Compression) processing when
inflate_fast() runs concurrently on multiple CPUs:
BUG: unable to handle page fault for address: ffffd0a3c0902ffa
RIP: inflate_fast+1431
Call Trace:
zlib_inflate
__deflate_decompress
crypto_comp_decompress
ipcomp_decompress [xfrm_ipcomp]
ipcomp_input [xfrm_ipcomp]
xfrm_input
At the crash point, the compiler generated three loads from the same
global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and
end for an indexed loop. Another CPU modified the counter between loads,
making the values inconsistent - the write went 3.4 MB past a 65 KB
buffer.
Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in
the top-level Makefile, guarded by a try-run compile test. The test
compiles a minimal program with and without -fprofile-update=prefer-atomic
using the full KBUILD_CFLAGS, then compares undefined symbols in the
resulting object files. If prefer-atomic introduces new undefined
references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax
on arm64 with outline-atomics), the flag is not added -- the kernel does
not link against libatomic.
On architectures where GCC inlines 64-bit atomic counter updates (x86_64,
s390, ...) the test passes and the flag is enabled, preventing the
compiler from merging counters with loop induction variables and fixing
the observed concurrent-access crash.
On architectures where the flag would introduce libatomic dependencies, it
is silently omitted and behaviour is no worse than before this patch.
Move the CFLAGS_GCOV block from its original position (before the arch
Makefile include) to after the core KBUILD_CFLAGS assignments but before
the scripts/Makefile.gcc-plugins include. This placement ensures the
try-run test sees arch-specific flags (-m32, -march=,
-mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that
would break the test on clean builds when plugin shared objects do not yet
exist. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Patchwork: https://patchwork.freedesktop.org/patch/704066/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix memory leaks in beacon template setup
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak destroying device
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req()
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nat: use kfree_rcu to release ops
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the controller and driver data lifetime so that they are released
on driver unbind.
Note that this also makes sure that the SPI controller is placed
correctly under the USB interface in the device tree. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: kvm: fix vector context allocation leak
When the second kzalloc (host_context.vector.datap) fails in
kvm_riscv_vcpu_alloc_vector_context, the first allocation
(guest_context.vector.datap) is leaked. Free it before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Clean up kthread on errors
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix memory leaks in gfs2_fill_super error path
Fix two memory leaks in the gfs2_fill_super() error handling path when
transitioning a filesystem to read-write mode fails.
First leak: kthread objects (thread_struct, task_struct, etc.)
When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the
created kernel threads (logd and quotad) are never destroyed. This
occurs because the fail_per_node label doesn't call
gfs2_destroy_threads().
Second leak: quota bitmap buffer (8192 bytes)
When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but
before other operations complete, the allocated quota bitmap is never
freed.
The fix moves thread cleanup to the fail_per_node label to handle all
error paths uniformly. gfs2_destroy_threads() is safe to call
unconditionally as it checks for NULL pointers. Quota cleanup is added
in gfs2_make_fs_rw() to properly handle the withdrawal case where
quota initialization succeeds but the filesystem is then withdrawn.
Thread leak backtrace (gfs2_freeze_lock_shared failure):
unreferenced object 0xffff88801d7bca80 (size 4480):
copy_process+0x3a1/0x4670 kernel/fork.c:2422
kernel_clone+0xf3/0x6e0 kernel/fork.c:2779
kthread_create_on_node+0x100/0x150 kernel/kthread.c:478
init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611
gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265
Quota leak backtrace (gfs2_make_fs_rw failure):
unreferenced object 0xffff88812de7c000 (size 8192):
gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409
gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149
gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275 |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/gsp: drop WARN_ON in ACPI probes
These WARN_ONs seem to trigger a lot, and we don't seem to have a
plan to fix them, so just drop them, as they are most likely
harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reserve enough transaction items for qgroup ioctls
Currently our qgroup ioctls don't reserve any space, they just do a
transaction join, which does not reserve any space, neither for the quota
tree updates nor for the delayed refs generated when updating the quota
tree. The quota root uses the global block reserve, which is fine most of
the time since we don't expect a lot of updates to the quota root, or to
be too close to -ENOSPC such that other critical metadata updates need to
resort to the global reserve.
However this is not optimal, as not reserving proper space may result in a
transaction abort due to not reserving space for delayed refs and then
abusing the use of the global block reserve.
For example, the following reproducer (which is unlikely to model any
real world use case, but just to illustrate the problem), triggers such a
transaction abort due to -ENOSPC when running delayed refs:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
umount $DEV &> /dev/null
# Limit device to 1G so that it's much faster to reproduce the issue.
mkfs.btrfs -f -b 1G $DEV
mount -o commit=600 $DEV $MNT
fallocate -l 800M $MNT/filler
btrfs quota enable $MNT
for ((i = 1; i <= 400000; i++)); do
btrfs qgroup create 1/$i $MNT
done
umount $MNT
When running this, we can see in dmesg/syslog that a transaction abort
happened:
[436.490] BTRFS error (device nullb0): failed to run delayed ref for logical 30408704 num_bytes 16384 type 176 action 1 ref_mod 1: -28
[436.493] ------------[ cut here ]------------
[436.494] BTRFS: Transaction aborted (error -28)
[436.495] WARNING: fs/btrfs/extent-tree.c:2247 at btrfs_run_delayed_refs+0xd9/0x110 [btrfs], CPU#4: umount/2495372
[436.497] Modules linked in: btrfs loop (...)
[436.508] CPU: 4 UID: 0 PID: 2495372 Comm: umount Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[436.510] Tainted: [W]=WARN
[436.511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[436.513] RIP: 0010:btrfs_run_delayed_refs+0xdf/0x110 [btrfs]
[436.514] Code: 0f 82 ea (...)
[436.518] RSP: 0018:ffffd511850b7d78 EFLAGS: 00010292
[436.519] RAX: 00000000ffffffe4 RBX: ffff8f120dad37e0 RCX: 0000000002040001
[436.520] RDX: 0000000000000002 RSI: 00000000ffffffe4 RDI: ffffffffc090fd80
[436.522] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffc04d1867
[436.523] R10: ffff8f18dc1fffa8 R11: 0000000000000003 R12: ffff8f173aa89400
[436.524] R13: 0000000000000000 R14: ffff8f173aa89400 R15: 0000000000000000
[436.526] FS: 00007fe59045d840(0000) GS:ffff8f192e22e000(0000) knlGS:0000000000000000
[436.527] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[436.528] CR2: 00007fe5905ff2b0 CR3: 000000060710a002 CR4: 0000000000370ef0
[436.530] Call Trace:
[436.530] <TASK>
[436.530] btrfs_commit_transaction+0x73/0xc00 [btrfs]
[436.531] ? btrfs_attach_transaction_barrier+0x1e/0x70 [btrfs]
[436.532] sync_filesystem+0x7a/0x90
[436.533] generic_shutdown_super+0x28/0x180
[436.533] kill_anon_super+0x12/0x40
[436.534] btrfs_kill_super+0x12/0x20 [btrfs]
[436.534] deactivate_locked_super+0x2f/0xb0
[436.534] cleanup_mnt+0xea/0x180
[436.535] task_work_run+0x58/0xa0
[436.535] exit_to_user_mode_loop+0xed/0x480
[436.536] ? __x64_sys_umount+0x68/0x80
[436.536] do_syscall_64+0x2a5/0xf20
[436.537] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[436.537] RIP: 0033:0x7fe5906b6217
[436.538] Code: 0d 00 f7 (...)
[436.540] RSP: 002b:00007ffcd87a61f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[436.541] RAX: 0000000000000000 RBX: 00005618b9ecadc8 RCX: 00007fe5906b6217
[436.541] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005618b9ecb100
[436.542] RBP: 0000000000000000 R08: 00007ffcd87a4fe0 R09: 00000000ffffffff
[436.544] R10: 0000000000000103 R11:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
most: core: fix leak on early registration failure
A recent commit fixed a resource leak on early registration failures but
for some reason left out the first error path which still leaks the
resources associated with the interface.
Fix up also the first error path so that the interface is always
released on errors. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
[ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out.
[ 110.583517] hantro-vpu 38310000.video-codec: bus error detected.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: size fh_verify server sockaddr slot by xpt_locallen
The nfsd_fh_verify and nfsd_fh_verify_err tracepoints declare the
server sockaddr slot sized by xpt_remotelen but fill it from
xpt_local using xpt_locallen:
TP_STRUCT__entry(
...
__sockaddr(server, rqstp->rq_xprt->xpt_remotelen)
...
)
TP_fast_assign(
...
__assign_sockaddr(server, &rqstp->rq_xprt->xpt_local,
rqstp->rq_xprt->xpt_locallen);
...
)
When xpt_locallen exceeds xpt_remotelen, __assign_sockaddr's memcpy
writes past the reserved ring-buffer slot. In the reverse direction
(xpt_locallen < xpt_remotelen) the slot is oversized and the
unwritten tail leaks prior ring-buffer contents to trace consumers.
The write-past-end case is reachable on NFS/UDP. svc_xprt_set_remote()
is only called from svc_tcp_accept() (net/sunrpc/svcsock.c) and from
the RDMA connect path; svc_create_socket() for UDP calls only
svc_xprt_set_local(), so xpt_remotelen stays 0 for the xprt's
lifetime. Every fh_verify trace for an NFSv2/v3-over-UDP request
then copies 16 or 28 bytes from xpt_local into a zero-byte slot.
The other NFSD tracepoints that record the server address
(NFSD_TRACE_PROC_CALL_FIELDS, NFSD_TRACE_PROC_RES_FIELDS,
SVC_RQST_ENDPOINT_FIELDS) already size the server slot by
xpt_locallen; nfsd_fh_verify and nfsd_fh_verify_err were the only
exceptions.
Fix by sizing the server slot with xpt_locallen so the declared slot
matches the copy length. The client slot and its assignment already
agree on xpt_remotelen and are left untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix extent map leak in NOCOW direct I/O write
btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an
extent map reference that must be dropped on all exit paths.
For direct writes into a NOCOW range, btrfs_get_blocks_direct_write()
keeps using that extent map and asks btrfs_create_dio_extent() to
allocate the ordered extent. If that fails, for example because
btrfs_alloc_ordered_extent() fails, the function returns the error
without dropping the input extent map. The PREALLOC path avoided this by
dropping the input extent map before replacing it with the newly created
one.
Check the error from btrfs_create_dio_extent() before replacing the
map and drop the input extent map on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in __bpf_get_stack
get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and
releases its recursion slot via put_callchain_entry() before returning,
so nothing keeps the entry reserved while __bpf_get_stack() consumes
it below.
A preemptible BPF program (e.g. a non-sleepable raw tracepoint program
on a PREEMPT kernel, which runs under migrate_disable() but not
preempt_disable()) can be scheduled out between obtaining the entry
and the copy. Another task scheduled on the same CPU then reuses the
same per-CPU buffer and overwrites trace->nr with a larger value.
copy_len is then computed from the inflated trace->nr and can exceed
the caller's buffer, causing an out-of-bounds write in the memcpy()
and in the build_id path.
The rcu_read_lock() taken here alone does not prevent this. It is
only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does
not disable preemption; it merely keeps perf's callchain buffer array
alive (freed via call_rcu()) and does nothing to stop another task
from reusing the entry.
Disable preemption around obtaining the callchain entry and copying
it into the caller's buffer, so the entry cannot be reused underneath
us and trace->nr stays bounded by max_depth. Build ID resolution may
fault and is therefore deferred until after preemption is re-enabled;
by then the instruction pointers have already been copied into buf,
so it operates only on that private copy. Note, preempt_disable() also
subsumes the buffer-lifetime guarantee the rcu_read_lock() provided,
since a preempt-disabled section is an RCU read-side critical section
for the callchain buffers' call_rcu() reclaim.
[ changed Fixes: commit ] |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: apple-soc: Fix OPP table cleanup
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the policy. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: reject duplicate CREDS_VALUE options
gssx_dec_option_array() walks the wire-supplied option array and, for
every entry whose name matches CREDS_VALUE, calls
gssx_dec_linux_creds() on the same struct svc_cred. That helper
unconditionally installs a fresh groups_alloc() result into
creds->cr_group_info without releasing whatever pointer was already
there:
for (i = 0; i < count; i++) {
... decode name ...
if (length == sizeof(CREDS_VALUE) &&
memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) {
err = gssx_dec_linux_creds(xdr, creds);
...
}
}
A reply that carries two CREDS_VALUE entries therefore overwrites
cr_group_info on the second iteration and orphans the group_info
allocated by the first call. The earlier free_creds path only
releases the last cr_group_info via free_svc_cred(), so the first
allocation's refcount stays at one and its kvmalloc-backed storage
is leaked. No in-tree caller of gssp_accept_sec_context_upcall()
expects more than one CREDS_VALUE per reply.
Fix by tracking whether a CREDS_VALUE option has already been
decoded and returning -EINVAL on any subsequent match, so the
free_creds path releases the single group_info that was installed. |
