| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76528 are related to protection mechanism failure and are grouped under the Common Weakness Enumeration (CWE) CWE-693. |
| vLLM before 0.31.0 uses a client-supplied multimodal uuid verbatim as cache identity with no consistency check on cache hits, allowing engine crashes. Unauthenticated attackers can desynchronize the P0/P1 processor caches to trigger a fatal token-placeholder mismatch, killing the entire serving instance until restarted. |
| vLLM before 0.31.0 contains a cache aliasing vulnerability that allows authenticated attackers to collide shared cache keys by supplying caller-controlled values such as EXIF ImageID or cache_salt. Attackers can set a UUID EXIF ImageID to receive another request's cached processed media, or match cache_salt to a LoRA name to reuse first-block KV state. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Portal). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Data Mover). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 3.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:L). |
| Client-Side Enforcement of Server-Side Security vulnerability in Divasoft Software and E-Commerce Inc. Biletiva Ticketing Platform allows Manipulating State.
This issue affects Biletiva Ticketing Platform: through 2026-07-23. |
| OpenRemote is an open-source internet-of-things platform. Prior to 1.24.2, the KNXProtocol.startAssetImport method in agent/src/main/java/org/openremote/agent/protocol/knx/KNXProtocol.java processes 0.xml from an authenticated user's uploaded ETS project ZIP with Saxon TransformerFactoryImpl and XMLInputFactory parsers that permit external entity resolution. This incomplete remediation of CVE-2026-40882 leaves the KNX handler unprotected while the parallel Velbus handler is hardened, allowing a regular realm user to read files accessible to the JVM process or cause server-side requests. This issue is fixed in version 1.24.2. |
| Waynboot-mall through 2.0.0 contains an insecure direct object reference vulnerability that allows authenticated members to access and modify other members' orders by supplying their order identifiers. Attackers can enumerate sequential order ids or serial numbers via detail, cancel, confirm, delete and refund endpoints to read recipient addresses and phone numbers or disrupt orders. |
| waynboot-mall through 2.0.0 contains an insecure direct object reference vulnerability in AddressController that allows authenticated members to modify or delete other members' shipping addresses. Attackers can enumerate auto-increment address ids and send POST /address or DELETE /address/{addressId} requests to overwrite or remove victims' saved addresses. |
| waynboot-mall through 2.0.0 contains an insecure direct object reference vulnerability in the mobile CartController that allows authenticated members to modify or delete other members' cart items. Attackers can enumerate sequential cart ids via PUT /cart, POST /cart/changeNum, and DELETE /cart/{cartId} to change quantities, selection state, or remove items. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in Drupal Central Authentication System (CAS) Server allows Fake the Source of Data. This issue affects Central Authentication System (CAS) Server versions: from 0.0.0 to 2.0.4, from 2.1.0 to 2.1.3. |
| Authorization Bypass Through User-Controlled Key vulnerability in Ahmad Majestic Support majestic-support allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Majestic Support: from n/a through 1.2.0. |
| Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a CSS scoping bypass in HTML messages. rcube_utils::mod_css_styles() did not treat an at-rule prologue such as @layer a; as a selector boundary, and did not handle selectors beginning with ::, so selectors following an at-rule were left unscoped and applied to the whole Roundcube interface instead of being confined to the message body. This allows an HTML message to restyle application chrome for UI redressing and spoofing. Upstream fixed this in the commit “Fix CSS scoping bypass in HTML messages using at-rules”. |
| Vulnerability in the Oracle Applications Framework product of Oracle E-Business Suite (component: Security). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Applications Framework. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Applications Framework accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Infer zext_dst based on static register liveness analysis
As reported in the thread [1], the verifier's 32-bit operations zero
extension logic is broken. This logic is responsible for correct
semantics of 32-bit operations on s390 architecture.
According to BPF semantics, operation `w1 += 1` is supposed to zero
extend the upper half of the register `r1`. On s390 the JIT relies on
the verifier emitting explicit zero extension before such operations.
The verifier attempts to minimize the amount of zero extensions
inserted by tracking whether upper halves of the 64-bit registers are
ever used. Previously such tracking worked as follows:
- bpf_reg_state->subreg_def field was set by do_check_insn()
for each operation defining lower but not the upper halves
of the register.
- Whenever an operation reading the whole register was verified,
the verifier checked register's subreg_def and set
bpf_insn_aux_data->zext_dst flag as true via a call to
mark_insn_zext() function.
- After the verification was complete, a special pass
bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations
with bpf_insn_aux_data->zext_dst set as true by adding
explicit zero extension.
Note that the logic above relies on bpf_reg_state->subreg_def,
which is a property of a current verifier state.
Before the commit [2] two additional steps happened:
- The verifier tracked upper and lower register halves' liveness as
flags REG_LIVE_READ{32,64} in bpf_reg_state->live.
- The function propagate_liveness() called mark_insn_zext()
in order to transfer the knowledge about which registers have
their upper halves alive (and thus might require zero extension).
The commit [2] removed the two steps described above,
hence making possible a situation like below:
- The register's upper half is set and is used on some verification
path P1 and the register happens not to be marked as precise.
- The checkpoint C is created while processing some instruction
between register initialization and usage.
- On some other verification path P2 the register's upper half is not
initialized and that path ends hitting the checkpoint C.
- In such a case the register's initialization on path P2 would lack
zext_dst mark, making it possible for the program to inject
an arbitrary value in the register's upper half.
This commit replaces subreg_def based logic with computing zext_dst
statically, as a part of the bpf_compute_live_registers() analysis:
- The analysis now tracks usage of upper and lower halves of the
registers separately.
- If some instruction defines a 32-bit subregister, but not the whole
register, *and* the upper half of the register is alive after that
instruction, the instruction is marked as zext_dst.
There is one notable drop in precision: whenever a BPF subprogram is
called, all 64 bits of parameter registers are presumed to be used.
The assumption is that such a drop in precision would not inflict
a noticeable performance penalty.
[1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/
[2] commit 107e16979905 ("bpf: disable and remove registers chain based liveness") |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76300 are related to improper control of a resource through its lifetime and are grouped under the Common Weakness Enumeration (CWE) CWE-664. |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76301 are related to protection mechanism failure and are grouped under the Common Weakness Enumeration (CWE) CWE-693. |
| The system fails to invalidate existing access tokens associated with sub-organization users during sensitive account management operations such as password reset, role change, or sub-organization disablement. This oversight allows previously issued tokens to remain active even after the user's access context has been modified or revoked through administrative actions.
The identified issue could lead to unauthorized access by a malicious actor, but only when all of the following conditions are met: previously issued access tokens remain active, and these tokens have been exposed to malicious actors. |
| Pillow is a Python imaging library. From 11.0.0 until 13.0.0, Exif.load() in src/PIL/Image.py repeatedly slices the remaining EXIF data while it begins with the six-byte Exif header. src/PIL/PngImagePlugin.py accepts an uncapped PNG eXIf chunk, so a file filled with repeated headers causes a new shrinking copy on every iteration and quadratic CPU work. The condition is reachable through Image.getexif(), Image._getexif(), and ImageOps.exif_transpose(), including common photo-upload rotation workflows. This issue is fixed in version 13.0.0. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JDK tools). Supported versions that are affected are Oracle Java SE: 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition executes to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 4.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:H/A:N). |
