| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: clean up color-change beacon data on errors
nl80211_color_change() calls nl80211_parse_beacon() for the beacon_next
template, which can allocate params.beacon_next.mbssid_ies and .rnr_ies.
A parsing failure returned directly instead of using the out: cleanup,
leaking any allocations completed before the error.
Allocate the nested attribute table before parsing beacon_next. Its
allocation failure can then return before beacon data exists, while a
later parsing failure uses out: to release the parsed data. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Fix FF device cleanup on init failure
hidpp_ff_init() creates the input force-feedback device with
input_ff_create(), then allocates the HID++ FF private data,
effect ID array, and workqueue.
If any of those allocations fail after input_ff_create() succeeds,
the function returns an error without destroying the FF device.
Add an unwind path that frees the private allocations made by
hidpp_ff_init() and calls input_ff_destroy() for failures after
input_ff_create() succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix race between policy activation and blkg destruction
When switching an IO scheduler on a block device, blkcg_activate_policy()
allocates blkg_policy_data (pd) for all blkgs attached to the queue.
However, blkcg_activate_policy() may race with concurrent blkcg deletion,
leading to use-after-free and memory leak issues.
The use-after-free occurs in the following race:
T1 (blkcg_activate_policy):
- Successfully allocates pd for blkg1 (loop0->queue, blkcgA)
- Fails to allocate pd for blkg2 (loop0->queue, blkcgB)
- Enters the enomem rollback path to release blkg1 resources
T2 (blkcg deletion):
- blkcgA is deleted concurrently
- blkg1 is freed via blkg_free_workfn()
- blkg1->pd is freed
T1 (continued):
- Rollback path accesses blkg1->pd->online after pd is freed
- Triggers use-after-free
In addition, blkg_free_workfn() frees pd before removing the blkg from
q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd
for a blkg that is being destroyed, leaving the newly allocated pd
unreachable when the blkg is finally freed.
Fix these races by extending blkcg_mutex coverage to serialize
blkcg_activate_policy() rollback and blkg destruction, ensuring pd
lifecycle is synchronized with blkg list visibility. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear buf on error in __bpf_get_task_stack
Both bpf_get_task_stack and bpf_get_task_stack_sleepable helpers that
use __bpf_get_task_stack have buf defined as ARG_PTR_TO_UNINIT_MEM
argument and we should initialize the buf on every return path.
Adding missing buf memset for __bpf_get_task_stack fail paths. This
provides deterministic buffer contents, which is useful when the buffer
is used directly as a map key. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: defrag: fix deadlock between defrag and delalloc space reservation
While running fsstress with autodefrag and flushoncommit, hit a deadlock
due to the fact that defrag reserves delalloc space while it's holding
dirty and locked folios, besides the extent range lock. The stack traces
are the following:
[958.624] task:kworker/u50:3 state:D stack:0 pid:20365 tgid:20365 ppid:2 task_flags:0x4208060 flags:0x00080000
[958.626] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
[958.627] Call Trace:
[958.628] <TASK>
[958.628] __schedule+0x4be/0x10f0
[958.629] ? preempt_count_add+0x69/0xa0
[958.630] schedule+0x26/0xd0
[958.631] wait_current_trans+0x102/0x160 [btrfs]
[958.632] ? __pfx_autoremove_wake_function+0x10/0x10
[958.633] start_transaction+0x374/0x900 [btrfs]
[958.634] btrfs_commit_current_transaction+0x1d/0x70 [btrfs]
[958.635] flush_space+0xca/0x5e0 [btrfs]
[958.636] ? _raw_spin_unlock+0x15/0x30
[958.637] ? btrfs_reduce_alloc_profile+0x8c/0x190 [btrfs]
[958.639] ? _raw_spin_unlock+0x15/0x30
[958.640] ? calc_available_free_space.isra.0+0x6f/0x110 [btrfs]
[958.641] do_async_reclaim_metadata_space+0x84/0x190 [btrfs]
[958.642] btrfs_async_reclaim_metadata_space+0x64/0x80 [btrfs]
[958.644] process_one_work+0x19d/0x3a0
[958.644] worker_thread+0x1c4/0x330
[958.645] ? __pfx_worker_thread+0x10/0x10
[958.646] kthread+0xfc/0x130
[958.647] ? __pfx_kthread+0x10/0x10
[958.648] ret_from_fork+0x1f7/0x2c0
[958.648] ? __pfx_kthread+0x10/0x10
[958.649] ret_from_fork_asm+0x1a/0x30
[958.650] </TASK>
[958.651] task:kworker/u49:7 state:D stack:0 pid:52990 tgid:52990 ppid:2 task_flags:0x4208060 flags:0x00080000
[958.653] Workqueue: writeback wb_workfn (flush-btrfs-334)
[958.655] Call Trace:
[958.655] <TASK>
[958.656] __schedule+0x4be/0x10f0
[958.657] ? __blk_flush_plug+0xe9/0x140
[958.658] schedule+0x26/0xd0
[958.658] io_schedule+0x42/0x70
[958.659] folio_wait_bit_common+0x12b/0x330
[958.660] ? folio_wait_bit_common+0x100/0x330
[958.662] ? __pfx_wake_page_function+0x10/0x10
[958.663] extent_write_cache_pages+0x599/0x830 [btrfs]
[958.664] ? acpi_fwnode_get_reference_args+0x1fa/0x270
[958.665] btrfs_writepages+0x77/0x130 [btrfs]
[958.666] ? __pfx_end_bbio_data_write+0x10/0x10 [btrfs]
[958.667] do_writepages+0xc6/0x160
[958.668] __writeback_single_inode+0x42/0x310
[958.669] writeback_sb_inodes+0x231/0x570
[958.670] wb_writeback+0x8a/0x340
[958.671] wb_workfn+0xbf/0x450
[958.672] ? finish_task_switch.isra.0+0xc1/0x350
[958.673] process_one_work+0x19d/0x3a0
[958.673] worker_thread+0x1c4/0x330
[958.674] ? __pfx_worker_thread+0x10/0x10
[958.675] kthread+0xfc/0x130
[958.676] ? __pfx_kthread+0x10/0x10
[958.676] ret_from_fork+0x1f7/0x2c0
[958.677] ? __pfx_kthread+0x10/0x10
[958.678] ret_from_fork_asm+0x1a/0x30
[958.679] </TASK>
[958.679] task:btrfs-cleaner state:D stack:0 pid:296750 tgid:296750 ppid:2 task_flags:0x208040 flags:0x00080000
[958.681] Call Trace:
[958.682] <TASK>
[958.682] __schedule+0x4be/0x10f0
[958.683] schedule+0x26/0xd0
[958.684] handle_reserve_ticket+0x1b9/0x2c0 [btrfs]
[958.685] ? __pfx_autoremove_wake_function+0x10/0x10
[958.686] reserve_bytes+0x283/0x4c0 [btrfs]
[958.687] btrfs_reserve_metadata_bytes+0x18/0xb0 [btrfs]
[958.688] btrfs_delalloc_reserve_metadata+0x121/0x320 [btrfs]
[958.690] btrfs_delalloc_reserve_space+0x46/0xb0 [btrfs]
[958.691] btrfs_defrag_file+0x903/0x1110 [btrfs]
[958.692] btrfs_run_defrag_inodes+0x334/0x430 [btrfs]
[958.694] cleaner_kthread+0x97/0x1c0 [btrfs]
[958.694] ? __pfx_cleaner_kthread+0x10/0x10 [btrfs]
[958.696] kthread+0xfc/0x130
[958.696] ? __pfx_kthread+0x10/0x10
[958.697] ret_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Return a delegation the client fails to record
When an NFS server grants a delegation in an OPEN reply,
nfs_inode_set_delegation() records it on the client. However, three
of its error flows return without sending DELEGRETURN.
A delegation can be relinquished only by DELEGRETURN (RFC 8881
Section 20.2.4), so dropping one silently leaves the server believing
the client still holds it. If the server happens to recall that
delegation, the client answers CB_RECALL with NFS4ERR_BADHANDLE
because it has no record of the stateid. The server revokes the
delegation and moves it onto its cl_revoked list, because the client
never sends the FREE_STATEID that would drain it. Every subsequent
SEQUENCE reply then carries SEQ4_STATUS_RECALLABLE_STATE_REVOKED,
and the client's state manager loops issuing TEST_STATEID across its
delegations without ever clearing the condition.
The window is easy to reach now that a server offers a write
delegation on any write OPEN: a delegation recalled for one opener
races a re-open that the server answers with a fresh write
delegation.
Instead of dropping it, hand the delegation back during these error
flows. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type
Samsung PWM timer might be used as a clock source on some legacy systems.
When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a
sleeping lock (mutex-based), which must not be used in atomic context
such as hard interrupt handlers. Switch the samsung_pwm_lock to the
raw_spinlock, which remains a true non-sleeping spinlock even
under PREEMPT_RT. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix max_qid race between configfs and controller allocation
The function nvmet_subsys_attr_qid_max_store() can race against
nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified.
Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes:
ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1);
and at this exact point, a userspace process changes max_qid to 128,
nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It
attempts to delete active controllers to force a reconnect, but the
new controller won't be deleted because it hasn't been added to the
subsys->ctrls list yet.
nvmet_alloc_ctrl() then proceeds and adds the new controller to the
subsys->ctrls list. Later, when nvmet_install_queue() is called, it
will see max_qid set to 128, but the memory allocated for sqs is only
sized for 64 entries. This results in a KASAN out-of-bounds warning
and potential memory corruptions.
Fix this by protecting the queue allocations and list insertion in
nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because
nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem)
to modify the attribute, this safely prevents the configfs writer from
modifying max_qid during controller creation.
Copy the max_qid from the subsystem to the controller's structure
during the allocation; ctrl->max_qid never changes as long as the
controller remains in LIVE state, so this will prevent similar race
conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iolatency: clear delay state when freeing policy data
io.latency can throttle a group which has no latency target of its own.
When a sibling misses its target, check_scale_change() scales down its
peers, and a peer that reaches queue depth one gets blkcg_use_delay()
called on it on every further scale-down, even with min_lat_nsec == 0.
iolatency_pd_offline() resets the target through
iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero
to zero transition, so it never clears such a peer. Freeing the policy
data then leaves blkg->use_delay set and blkcg->congestion_count
elevated with nothing left that can drop it.
blk_cgroup_congested() then returns true for every task in that cgroup
and its descendants for as long as the cgroup lives: page_cache_sync_ra()
cuts readahead to a single page, page_cache_async_ra() skips it
altogether, and __folio_throttle_swaprate() takes swap_avail_lock and
schedules a throttle on anonymous folio allocation.
Clear the delay in iolatency_pd_free(). By then bio-held blkg
references have drained, or the queue is frozen for policy
deactivation, so check_scale_change() cannot re-arm it. The free
callback can also see policy data which was never attached to a blkg,
hence the pd->blkg check. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check pointer type for all atomic RMW paths
Atomic RMW verification records an instruction pointer type only when the
current destination is PTR_TO_ARENA. A second path can therefore reach the
same instruction with an ordinary pointer without comparing it against the
saved arena type.
The post-verification fixup uses the saved type to rewrite the instruction
to BPF_PROBE_ATOMIC for every path. Record the actual destination type for
all atomic RMW paths so the existing mismatch check rejects incompatible
uses of one instruction. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.1: zero referring call lists before decoding
decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so
each referring_call_list starts uninitialized. decode_rc_list() assigns
rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero
referring calls therefore leaves the pointer uninitialized, and
nfs4_callback_sequence() later passes stale slab contents to kfree().
Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is
NULL from the beginning, including valid empty referring call lists. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: do not leak an hci_conn when a second LE connect is rejected
create_le_conn_complete() decides whether the failed connection is
still pending by comparing it against hci_lookup_le_connect(), which
returns the first LE connection in BT_CONNECT. That is the same
connection only while at most one is pending.
Two can be pending. Connections created on the passive scan path sit
in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to
hci_lookup_le_connect() until hci_le_create_conn_sync() clears the
flag when their command is issued, so the -EBUSY guard in
hci_connect_le() does not prevent a second connection from being
queued while the first is still on the scan path. Whenever two
connections are in BT_CONNECT at once, the lookup may return one
connection while create_le_conn_complete() is reporting the failure
of the other; the early exit then drops the error and hci_conn_failed()
never runs on the connection that failed.
The controller also rejects a second HCI_OP_LE_CREATE_CONN issued
while another connection creation is still outstanding, per Core Spec
Vol 4, Part E. The spec calls for Command Disallowed there; the
bcm43438 observed here answers with an LMP/LL error code instead,
which bt_to_errno() maps to the -EPROTO (-71) in the log below.
The leaked connection stays in BT_CONNECT forever, and because
hci_connect_le() refuses to dial while hci_lookup_le_connect() finds
anything, every subsequent attempt to reach any peer fails with
-EBUSY and no command reaches the controller at all.
Seen on a bcm43438 with two BLE peers polled on the same interval
(state 5 is BT_CONNECT; both handles are UNSET ones, allocated from
the ida above HCI_CONN_HANDLE_MAX):
Bluetooth: hci1: Opcode 0x2013 failed: -71
# hcitool con
< LE 14:9C:EF:03:68:81 handle 3840 state 5 lm CENTRAL
< LE C4:D3:6A:8C:B5:38 handle 3841 state 5 lm CENTRAL
A btmon capture across the next ten minutes of connect attempts
contains no HCI_OP_LE_CREATE_CONN at all; outgoing LE connections
do not recover until the adapter is reset. With this change the same
scenario fails the rejected connection cleanly and further connects
to both peers go through.
Ask about the connection itself instead of about the device. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU
When emulating INVVPID, KVM executes INVVPID on the physical CPU using
vpid02 (instead of the L1 assigned VPID), after doing some validations
on the operands. However, it is possible that the physical CPU KVM
executes INVVPID on is different from the CPU L2 is running on.
For example, in the following scenario:
- L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1)
- L1 migrates to CPU #2 and executes INVVPID
- KVM executes INVVPID on CPU #2
- L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02.cpu=1)
The TLB entries on CPU #1 are never invalidated, because INVVPID was
executed on CPU #2, and vmcs02 never ran on a different pCPU (i.e.
vmx_vcpu_load_vmcs() will *not* request KVM_REQ_TLB_FLUSH).
Ensure that INVVPID is being executed on the same pCPU that L2 last ran
on, and if not, fallback to clearing last_vpid=0 to trigger a full VPID
flush on the next nested VM-Enter (as KVM will detect L1 using a
different VPID for L2). If L2 ends up running on a different pCPU, KVM
will flush the TLB anyway through vmx_vcpu_load_vmcs(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory corruption by not reinjecting CK machine checks
Channel-subsystem damage machine checks are for the host channel
subsystem. The guest channel subsystem is emulated in the userspace VMM.
There is no point in forwarding such machine checks into the guest.
This also simplifies the machine check reinjection and avoids kfree of a
stack variable as reported by sashiko. There might be still machine
checks that have the ck bit set with another bit (like instruction
damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and
ED bits already are. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to migrate all curseg types during free_segment_range
In free_segment_range(), the curseg evacuation loop only iterates up to
NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg
types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC.
Even though these in-memory curseg types are not saved in the on-disk
checkpoint header, they still occupy active physical segments at runtime.
If an active in-memory curseg happens to be allocated within the segment
range being truncated during filesystem shrink, failing to evacuate it
will cause subsequent writes to the curseg attempting out-of-bounds I/O
on the truncated storage range.
Fix this by expanding the curseg evacuation loop upper bound to
NR_CURSEG_TYPE to ensure all active curseg types are safely migrated
out of the target range. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix out-of-bounds write when null terminating a label vec
aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE
is passed. If the components are all distinct no duplicates are dropped,
dups is 0 and the terminator goes to vec[n], so the caller has to provide
room for n + 1 entries.
aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len,
gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but
vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES
it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it
allocates exactly len pointers. The terminator therefore lands one entry
past the end of the local array when len is LOCAL_VEC_ENTRIES, and one
entry past the end of the allocation when len is larger.
len comes from the number of "//&" separated components in the label name
and label_count_strn_entries() does not bound it. An unprivileged task
reaches the parse by writing to /proc/self/attr/apparmor/current or through
lsm_set_self_attr(2), both of which go through do_setattr(), and the name
is parsed before the change_profile permission is checked.
The query_label() path behind the securityfs .access file, which is
mode 0666, performs no permission check at all. Every component has to
resolve to a loaded profile, so a system with policy loaded is required.
The other two VEC_FLAG_TERMINATE users work on a label vec that
aa_label_alloc() has already sized with "+ 1 for null terminator entry on
vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing
len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of
the local array and into kzalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
It's pointless to call WARN_ON() in case of an allocation failure in
dev_change_net_namespace() and device_rename(), since it only leads to
useless splats caused by deliberate fault injections, so avoid it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_iotlb: bound map allocation in add_range
vhost_iotlb_add_range_ctx() only retires an old entry when the table
has a non-zero limit, has exactly reached that limit and has
VHOST_IOTLB_FLAG_RETIRE set. Non-retiring tables can keep allocating
entries after reaching their configured limit.
Existing vhost devices allocate their IOTLB with max_iotlb_entries from
vhost.c, which defaults to 2048 and is tunable by module parameter. Use
the caller-provided limit at the allocation point instead of adding a
separate default in the common IOTLB helper, and reject non-positive
values in vhost paths that can report an error.
Other vhost IOTLB users should not create zero-limit tables when entries
can be populated from userspace or guest-controlled requests. Add
caller-side max_iotlb_entries parameters for mlx5 vDPA, VDUSE and
vhost-vDPA. Reject non-positive VDUSE and vhost-vDPA values, and require
at least two entries for vdpa_sim and mlx5 vDPA paths that install
full-range mappings, since those mappings are split into two IOTLB
entries.
Handle full-range mappings in the common helper by checking that the
IOTLB can hold both split entries before inserting the first half. This
avoids returning an error after leaving a half mapping behind.
When the table is full, keep the existing retire behavior for retiring
tables and return -ENOSPC for non-retiring tables. Reuse the retired map
node instead of freeing it and allocating a replacement, so a stream of
IOTLB updates cannot keep forcing GFP_ATOMIC allocations after the table
has reached its limit. If a zero-limit IOTLB still reaches the common
helper, treat it as a configuration error and return -EINVAL.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix type confusion in notification logic
Sashiko reports:
At the start of the loop in pmbus_notify(), the code unconditionally casts
every attribute to a struct sensor_device_attribute:
drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() {
for (i = 0; i < data->num_attributes; i++) {
struct device_attribute *da = to_dev_attr(data->group.attrs[i]);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int index = attr->index;
...
}
However, data->group.attrs can contain other types like struct
pmbus_samples_reg or struct pmbus_sensor, which only embed a base
struct device_attribute.
If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting
it to struct sensor_device_attribute and reading the index field appears
to access memory past the end of the allocation, which might trigger a
slab-out-of-bounds read.
Additionally, if da is a struct pmbus_sensor, casting it causes the index
field to overlap with the page, phase, and reg fields. Could this produce
a garbage mask on little-endian systems that spuriously matches the target
reg, page, and flags during an alert?
Fix the problem by using struct sensor_device_attr in struct pmbus_sensor
and struct pmbus_label. Since those attributes never trigger a
notification, set the value of attr->index to -1 for them. Use this value
to distinguish from boolean attributes which _can_ trigger a notification
and use the index field to encode mask, page, and register values. |
