| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for SEV ioctls
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized. |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause uncontrolled resource consumption. A successful exploit of this vulnerability might lead to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: pata_sl82c105: fix bridge revision use-after-free
pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b
("PCI: Change all drivers to use pci_device->revision") replaced a
configuration-space read with direct access to the cached revision field,
but left that access after pci_dev_put(). The bridge may therefore be freed
before its revision is read.
Read the revision before dropping the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: fp9931: Fix VPOS/VNEG voltage selector table
The VPOSNEG_table[] mapping does not match the FP9931 datasheet.
The datasheet defines the VPOS/VNEG voltage mapping as:
00h-04h -> 7.04V (-7.04V)
05h -> 7.26V (-7.26V)
06h -> 7.49V (-7.49V)
...
28h-3Fh -> 15.06V (-15.06V)
However, VPOSNEG_table[] has two issues:
1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the
table has 6 entries of 7.04V, causing all subsequent entries to be
shifted by one position.
2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but
the table has only 41 entries. Any selector value above 0x28
would result in an out-of-bounds table access.
Fix both issues by removing the duplicate 7.04V entry and appending
the missing 23 clamped 15.06V entries, bringing the table to the
correct size of 64 entries (0x00~0x3F). |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: ensure socket is owned by ovpn before deref sk_user_data
Some subsystems, like BPF SOCKMAP, set sk_user_data without
actually setting the encap_type.
For this reason, we must make sure that the type is the
one ovpn expects before dereferencing sk_user_data.
Failing to do so may lead to out-of-bounds reads. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: loongson2: Fix sg iteration in data reorder functions
In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(),
the for_each_sg() macro already iterates over the scatterlist entries,
with 'sg' pointing to the current entry. However, the code incorrectly
uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats
'sg' as an array base and indexes it again, leading to access of
wrong sg entries (or out-of-bounds if the list is not an array). |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: fix remaining %pOF after of_node_put()
scpsys_get_bus_protection_legacy() looks up several legacy bus
protection regmaps from device-tree nodes.
Two error paths put the device node before checking whether the regmap
lookup failed, but still pass that node to dev_err_probe() with %pOF on
failure. If of_node_put() drops the last reference, the later %pOF
formatting can dereference a freed device node.
Keep the node reference until after the error message has been emitted in
the infracfg and SMI lookup paths. Also drop the SMI node before
returning when the SMI phandle is missing. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: mfg: initialize prev_o in mtk_mfg_attach_dev()
mtk_mfg_attach_dev() reads prev_o on the first iteration of its loop,
in "if (prev_o && prev_o->freq == o->freq)", before prev_o is assigned
at the end of the loop body. On that first iteration, evaluating prev_o
reads an indeterminate value. If it is non-NULL, the condition
dereferences a stale or invalid pointer, potentially faulting or
incorrectly skipping the first OPP.
Initialize prev_o to NULL. This matches the intent as well: there is no
previous OPP to compare against on the first iteration.
Found with Clang's -Wconditional-uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix bandwidth group reservation indexing
Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group
ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly
to index its local group_reserved[] array.
The array currently has MAX_GROUPS entries, so its valid indices are 0
through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one
element past the end, and the final group's reserved bandwidth is not
included when the array is summed.
Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID
indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/log: Fix out-of-bounds read on empty message length
drm_log_draw_kmsg_record() accesses s[len - 1] to strip the trailing
newline, but len is unsigned int. If len is 0, the subtraction wraps
to UINT_MAX, causing an out-of-bounds read.
Add an early return when len is 0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/connector/hdmi: Fix out of bounds memory read
A helper function was copying a given audio infoframe into the
connector's copy but using the size of the destination (a generic
target, sized to accept many different data blocks) not the source (a
very specific type of data block). Thus, it was copying 60 bytes of
data from a 28 byte allocation.
Fix that by using the source size instead, together with a build bug
on the source size actually being smaller than the destination.
I hit this running KUnit tests under KASAN (while debugging something
else entirely). In the real world, it seems unlikely to cause an
actual problem. It is a read not a write so it can't corrupt any
memory. However, it could potentially fall off the end of a page and
cause an accvio bug. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: psxpad-spi - set driver data before use
psxpad_spi_suspend() retrieves the controller state with
spi_get_drvdata(), but probe never stores it, so suspend dereferences a
NULL pointer. Store it during probe. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - use print_hex_dump_devel to guard key hex dumps
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() and gen_split_key() to avoid leaking secrets at runtime when
CONFIG_DYNAMIC_DEBUG is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep dynamic inner array lookups nullable
An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its
inner map template. A concrete inner array with a different max_entries
value can then replace the template.
After a successful outer map lookup, the verifier represents the
resulting map pointer using the inner map template. Const-key lookup
nullness elision consequently uses the template max_entries even though
the runtime helper uses the concrete inner map max_entries.
Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP,
because the template max_entries does not prove that the key is in bounds
for the concrete runtime map. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix register corruption from uninitialized cregs on error
compat_riscv_gpr_set() calls cregs_to_regs() unconditionally, even when
user_regset_copyin() fails. Since cregs is an uninitialized stack
variable, a copyin failure causes uninitialized stack data to be written
into the target task's pt_regs, corrupting its register state and
potentially leaking kernel stack contents.
compat_restore_sigcontext() has the same issue: it calls cregs_to_regs()
even when __copy_from_user() fails, leading to the same corruption of
the signal-returning task's register state on error.
Only call cregs_to_regs() when the user copy succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: drbg - Fix returning success on failure in CTR_DRBG
drbg_ctr_generate() sometimes returns success when it fails, leaving the
output buffer uninitialized. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: eic-sprd: use raw_spinlock_t in the irq startup path
sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller
state through sprd_eic_update(), which takes sprd_eic->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and
used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv]
sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The
locked section only serializes MMIO register updates and does not contain
sleepable operations, so keeping it non-sleeping is appropriate for the
irqchip callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: epf: Avoid calling pci_irq_vector() from hardirq context
ntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derive
the vector number. pci_irq_vector() calls msi_get_virq() that takes a
mutex and can therefore trigger "scheduling while atomic" splats:
BUG: scheduling while atomic: kworker/u33:0/55/0x00010001
...
Call trace:
...
schedule+0x38/0x110
schedule_preempt_disabled+0x28/0x50
__mutex_lock.constprop.0+0x848/0x908
__mutex_lock_slowpath+0x18/0x30
mutex_lock+0x4c/0x60
msi_domain_get_virq+0xe8/0x138
pci_irq_vector+0x2c/0x60
ntb_epf_vec_isr+0x28/0x120 [ntb_hw_epf]
__handle_irq_event_percpu+0x70/0x3a8
handle_irq_event+0x48/0x100
handle_edge_irq+0x100/0x1c8
...
Cache the Linux IRQ number for vector 0 when vectors are allocated and
use it as a base in the ISR. Running the ISR in a threaded IRQ handler
would also avoid the problem, but that would be unnecessary here. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid calling post_write_mst_fixup() for invalid index_block
ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write()
returns an error, intending to restore the buffer after a failed write.
However, ntfs_ib_write() returns an error immediately if
pre_write_mst_fixup() validation fails. The caller,
ntfs_icx_ib_sync_write(), interprets any error as a write failure
requiring rollback. It does not differentiate between I/O errors and
validation failures, and calls post_write_mst_fixup() anyway.
Since post_write_mst_fixup() assumes that the index_block contents is
correct, it doesn't perform the boundary checks, which results in
out-of-bounds memory access.
An attacker can craft a malicious NTFS image with:
- large index_block.usa_ofs offset, pointing outside the ntfs_record
- index_block.usa_count = 0, causing integer underflow
- or index_block.usa_count larger than actual number of sectors in the
ntfs_record, causing out-of-bounds access
KASAN reports describing the memory corruption:
==================================================================
BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x19c/0x1d0
Read of size 2 at addr ffff8881586c9018 by task p/9428
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
print_report+0x139/0x4ad
? post_write_mst_fixup+0x19c/0x1d0
? __virt_addr_valid+0x262/0x500
? post_write_mst_fixup+0x19c/0x1d0
kasan_report+0xe4/0x1d0
? post_write_mst_fixup+0x19c/0x1d0
post_write_mst_fixup+0x19c/0x1d0
ntfs_icx_ib_sync_write+0x179/0x220
ntfs_inode_sync_filename+0x83d/0x1080
__ntfs_write_inode+0x1049/0x1480
ntfs_file_fsync+0x131/0x9b0
==================================================================
BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x1aa/0x1d0
Write of size 2 at addr ffff8881586c91fe by task p/9428
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
print_report+0x139/0x4ad
? post_write_mst_fixup+0x1aa/0x1d0
? __virt_addr_valid+0x262/0x500
? post_write_mst_fixup+0x1aa/0x1d0
kasan_report+0xe4/0x1d0
? post_write_mst_fixup+0x1aa/0x1d0
post_write_mst_fixup+0x1aa/0x1d0
ntfs_icx_ib_sync_write+0x179/0x220
ntfs_inode_sync_filename+0x83d/0x1080
__ntfs_write_inode+0x1049/0x1480
ntfs_file_fsync+0x131/0x9b0
==================================================================
Let's move the post_write_mst_fixup() call to ntfs_ib_write().
The ntfs_ib_write() function calls pre_write_mst_fixup() at the beginning.
If the index_block contents is invalid, pre_write_mst_fixup() fails and
ntfs_ib_write() returns early without calling post_write_mst_fixup() on
bad index_block. |
