Export limit exceeded: 421324 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421324 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (109259 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68470 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate extension-frame layout before RX Extension frames only have the extension header at the regular 802.11 header offset. The generic RX path can still reach helpers and interface dispatch code that read regular header address fields before unsupported extension subtypes are dropped. mac80211 currently only handles S1G beacon extension frames. Drop other extension subtypes before they can reach regular-header RX processing. For S1G beacons, linearize the SKB with the management-frame path and require the fixed S1G beacon header, including optional fixed fields indicated by frame control, before generic RX dispatch. Route S1G beacons through the station/default-link RX path without regular-header station lookup. Avoid regular-header address reads in the mac80211 RX paths that process S1G extension beacons, including accept-frame, duplicate-detection, address-copy, and MLO address-translation paths. Also make ieee80211_get_bssid() length-safe before returning the S1G source-address pointer. | ||||
| CVE-2026-68447 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size from hardware without bounding it to the allocated BO region. If the HW field is larger than the queue's control stack allocation, memcpy reads past the BO into adjacent GTT memory and can leak kernel data to userspace. Store the page-aligned control stack BO size in mqd_manager and clamp checkpoint copies and reported checkpoint sizes to min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound for multi-XCC v9.4.3 checkpoint layout. (cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3) | ||||
| CVE-2026-68400 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix Endpoint Memory Access Descriptor offset calculation Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint memory access array and to comply with the FF-A spec instead of defaulting to `sizeof(struct ffa_mem_region)`. This requires moving `ffa_mem_region_additional_setup()` earlier in the setup flow. Also, add sanity checks to ensure the calculated descriptor offsets do not exceed `max_fragsize`. | ||||
| CVE-2026-68393 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: extend conn_hash lookup critical sections Using RCU-protected pointers outside the critical sections without refcount is incorrect and may result to UAF. Extend critical section to cover both hci_conn_hash lookup and use of the returned conn. Add surrounding rcu_read_lock() also when return value is not used, in preparation for RCU lockdep requirement to hci_lookup_le_connect(). This avoids concurrent deletion of the conn before we are done dereferencing it. Also, make sure to hold hdev->lock when accessing hdev->accept_list. | ||||
| CVE-2026-68383 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Keep scheduler timeline name alive The scheduler keeps a pointer to the timeline name, but q->name is freed with the exec queue while scheduler fences can still reference it. Store the name in struct xe_guc_exec_queue so it shares the scheduler's RCU-deferred lifetime. (cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) | ||||
| CVE-2026-68295 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Zero-extend signed ALU32 div/mod results ALU32 operations write a 32-bit result and leave the upper 32 bits of the BPF register zero. The LoongArch JIT sign-extends the result of signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient or remainder leaves bits 63:32 set in JITted code while the verifier and interpreter model those bits as zero. Keep sign-extension on the operands, which signed divide needs, and zero-extend the ALU32 result after the divide or modulo instruction, matching the unsigned ALU32 div/mod paths and every other ALU32 operation in this JIT. | ||||
| CVE-2026-64539 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix stack OOB write when prepending the Flags AD eir_create_adv_data() builds the advertising data into a fixed-size buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags" AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies the per-instance data without checking that it still fits: memcpy(ptr, adv->adv_data, adv->adv_data_len); tlv_data_max_len() only reserves those 3 bytes when the user-supplied flags carry a managed-flags bit, so an instance added with flags == 0 is accepted with adv_data_len up to the full buffer. At advertise time the flags are still prepended, and the memcpy() writes 3 + adv_data_len bytes into the size-byte buffer: BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301) Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65 Workqueue: hci0 hci_cmd_sync_work __asan_memcpy (mm/kasan/shadow.c:106) eir_create_adv_data (net/bluetooth/eir.c:301) hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310) hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817) hci_cmd_sync_work (net/bluetooth/hci_sync.c:332) This frame has 1 object: [32, 64) 'cp' The "Flags" structure is added by the kernel, not requested by userspace, so only prepend it when it fits together with the instance advertising data; when there is no room for both, drop the flags rather than the user-provided data. Reachable by a local user with CAP_NET_ADMIN owning an LE-only controller on the legacy advertising path. | ||||
| CVE-2026-64377 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-cpufreq-hw: Fix possible double free qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to one element of this array in policy->driver_data. qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data. This is not valid because the memory is devm-managed. For the first domain, this can free the devm-managed allocation while the devres entry is still active, leading to a possible double free when the platform device is later detached. For other domains, the pointer may refer to an element inside the array rather than the allocation base. Remove the kfree(data) call and let devres release qcom_cpufreq.data. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-64117 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. | ||||
| CVE-2026-64001 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix setup list UAF on proc write error snd_pcm_oss_proc_write() links a newly allocated setup entry into the OSS setup list before duplicating the task name. If the task-name allocation fails, the error path frees the already linked entry and leaves setup_list pointing at freed memory. A later OSS device open can then walk the stale list entry in snd_pcm_oss_look_for_setup() and dereference freed memory. Allocate the task name and initialize the setup entry before publishing the entry on setup_list. Also fetch the initial proc read iterator only after taking setup_mutex, so all setup_list traversal follows the same list lifetime rules. | ||||
| CVE-2026-53277 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation walk_s1() and kvm_walk_nested_s2() expect to be called while holding kvm->srcu to guard against memslot changes. While this is generally the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the respective walkers without taking kvm->srcu. Fix by acquiring kvm->srcu prior to the table walk in both instances. | ||||
| CVE-2026-53179 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read. | ||||
| CVE-2026-53178 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow. | ||||
| CVE-2026-53115 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] | ||||
| CVE-2026-53097 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work() When the mt7996 pci chip is detaching, the mt7996_crash_data is released in mt7996_coredump_unregister(). However, the work item dump_work may still be running or pending, leading to UAF bugs when the already freed crash_data is dereferenced again in mt7996_mac_dump_work(). The race condition can occur as follows: CPU 0 (removal path) | CPU 1 (workqueue) mt7996_pci_remove() | mt7996_sys_recovery_set() mt7996_unregister_device() | mt7996_reset() mt7996_coredump_unregister() | queue_work() vfree(dev->coredump.crash_data) | mt7996_mac_dump_work() | crash_data-> // UAF Fix this by ensuring dump_work is properly canceled before the crash_data is deallocated. Add cancel_work_sync() in mt7996_unregister_device() to synchronize with any pending or executing dump work. | ||||
| CVE-2026-53091 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: pull headers in qdisc_pkt_len_segs_init() Most ndo_start_xmit() methods expects headers of gso packets to be already in skb->head. net/core/tso.c users are particularly at risk, because tso_build_hdr() does a memcpy(hdr, skb->data, hdr_len); qdisc_pkt_len_segs_init() already does a dissection of gso packets. Use pskb_may_pull() instead of skb_header_pointer() to make sure drivers do not have to reimplement this. Some malicious packets could be fed, detect them so that we can drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. | ||||
| CVE-2026-52983 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix BQL imbalance in TX path Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight packets are accounted only for the AIROHA_NUM_TX_RING netdev TX queues. The queue index is computed as: qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx) txq = netdev_get_tx_queue(dev, qid); However, airoha_qdma_tx_napi_poll() accounts completions across all netdev TX queues (num_tx_queues), leading to inconsistent BQL accounting. Also reset all netdev TX queues in the ndo_stop callback. | ||||
| CVE-2026-46076 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs] | ||||
| CVE-2026-45956 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl() vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to obtain a struct vidi_context pointer. However, drm_dev->dev is the exynos-drm master device, and the driver_data contained therein is not the vidi component device, but a completely different device. This can lead to various bugs, ranging from null pointer dereferences and garbage value accesses to, in unlucky cases, out-of-bounds errors, use-after-free errors, and more. To resolve this issue, we need to store/delete the vidi device pointer in exynos_drm_private->vidi_dev during bind/unbind, and then read this exynos_drm_private->vidi_dev within ioctl() to obtain the correct struct vidi_context pointer. | ||||
| CVE-2026-45932 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tcx/netkit detach permissions when prog fd isn't given This commit fixes a security issue where BPF_PROG_DETACH on tcx or netkit devices could be executed by any user when no program fd was provided, bypassing permission checks. The fix adds a capability check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case. | ||||