| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security flaw has been discovered in OpenAkita up to 1.27.12. This vulnerability affects unknown code of the file /api/upload of the component File Upload API. The manipulation of the argument File results in cross site scripting. The attack may be performed from remote. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
| The Brizy WordPress plugin before 2.8.19 does not sanitize or escape featured-image focal-point coordinates submitted through one of its AJAX actions before storing them and later echoing them into HTML attributes in the post editor's Featured Image meta box, allowing users with the Contributor role or above to inject arbitrary web scripts that execute in the session of a higher-privileged user who opens the post for review. |
| A vulnerability was found in diaowen DWSurvey up to 6.14.0. Impacted is the function in DwDeisgnSurveyController.devSurvey. of the file /api/dwsurvey/app/v6/dw-design-survey/dev-survey.do of the component Survey Handler. The manipulation results in authorization bypass. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in GL.iNet GL-MT3000 up to 4.4.5. Impacted is the function set_upgrade of the file /cgi-bin/glc of the component modem.so. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. |
| Origin validation error in Microsoft Edge (Chromium-based) allows an unauthorized attacker to perform tampering over a network. |
| Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| The Clearfy Cache WordPress plugin before 2.4.3 does not validate the redirect target in its Cyrlitera old-URL redirect handler, passing a decoded request URI to an unsafe redirect function, which allows unauthenticated attackers to redirect visitors to an arbitrary external URL when a non-default option is enabled. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache Thrift Python, Go, PHP and Java bindings.This issue affects Apache Thrift: before 0.24.0.
Users are recommended to upgrade to version 0.24.0, which fixes the issue. |
| Missing authorization in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. From 44.0.0 until 50.0.0, pkcs7_decrypt_der, pkcs7_decrypt_pem, and pkcs7_decrypt_smime reported the outcome of decrypting a RecipientInfo's encryptedKey in several distinguishable ways, one of which disclosed the exact length recovered from the RSA operation. The same distinction was also observable by timing. An application that decrypts attacker-supplied EnvelopedData and reflects the outcome gives the attacker a Bleichenbacher oracle against the content-encryption key. Decryption ran as RSA PKCS#1 v1.5 decrypt of encryptedKey, build an AES cipher from the result, then AES-CBC decrypt and PKCS#7 unpad. Invalid RSA padding, a valid padding with a bad key length, a correct length with a wrong key, and the real key each failed or succeeded differently. Case 1 is reachable only where the linked library lacks implicit rejection: OpenSSL 3.0 and 3.1, LibreSSL, and BoringSSL. Exploitation requires a service that auto-decrypts untrusted EnvelopedData matching the victim certificate and answers adaptively at high volume, such as an S/MIME gateway or mail filter. This issue is fixed in 50.0.0. |
| A weakness has been identified in danpros HTMLy up to 3.1.1. This vulnerability affects unknown code of the file /system/htmly.php of the component Author Name Handler. Executing a manipulation of the argument Name can lead to path traversal. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Origin validation error in Microsoft Edge (Chromium-based) allows an unauthorized attacker to perform spoofing over a network. |
| Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops()
kvm_hyp_handle_mops() resets the single-step state machine as part of
rewinding state for a MOPS exception by modifying vcpu_cpsr() and
writing the result directly into hardware.
In the case of nested virtualization, vcpu_cpsr() is a synthetic value
such that the rest of KVM can deal with vEL2 cleanly. That means the
value requires translation before being written into hardware, which is
unfortunately missing from the MOPS handler.
Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state
altogether, which will be resynchronized on the next 'full' exit back
to KVM. |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause unexpected system termination. |
| A denial of service issue was addressed by removing the vulnerable code. This issue is fixed in macOS Tahoe 26.6. A local attacker may be able to cause a denial of service. |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.3.1, Address4 accepts an octet written with a leading zero and decodes it as decimal, while the WHATWG URL host parser, inet_aton, and getaddrinfo all decode a leading zero as octal. The library and the network stack therefore disagree about which host a string names. new Address4('012.0.0.1') reports correctForm() of 12.0.0.1 and isPrivate() of false, but fetch('http://012.0.0.1/') connects to 10.0.0.1. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, will classify an internal target as external and allow the request. The defect is in the parse gate rather than in any one classifier, so every consumer of Address4 inherits it: isPrivate(), isLoopback(), isLinkLocal(), isCGNAT(), isInSubnet(), isHostInSubnet(), and correctForm() are all computed from the mis-decoded octets. This issue is fixed in version 10.3.1. |
