| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Job Iteration API is an an extension for ActiveJob that make jobs interruptible and resumable Versions prior to 1.11.0 have an arbitrary code execution vulnerability in the `CsvEnumerator` class. This vulnerability can be exploited by an attacker to execute arbitrary commands on the system where the application is running, potentially leading to unauthorized access, data leakage, or complete system compromise. The issue is fixed in versions `1.11.0` and above. Users can mitigate the risk by avoiding the use of untrusted input in the `CsvEnumerator` class and ensuring that any file paths are properly sanitized and validated before being passed to the class methods. Users should avoid using the `count_of_rows_in_file` method with untrusted CSV filenames. |
| GitHub Kanban MCP Server is a Model Context Protocol (MCP) server for managing GitHub issues in Kanban board format and streamlining LLM task management. Version 0.3.0 of the MCP Server is written in a way that is vulnerable to command injection vulnerability attacks as part of some of its MCP Server tool definition and implementation. The MCP Server exposes the tool `add_comment` which relies on Node.js child process API `exec` to execute the GitHub (`gh`) command, is an unsafe and vulnerable API if concatenated with untrusted user input. As of time of publication, no known patches are available. |
| dag-factory is a library for Apache Airflow® to construct DAGs declaratively via configuration files. In versions 0.23.0a8 and below, a high-severity vulnerability has been identified in the cicd.yml workflow within the astronomer/dag-factory GitHub repository. The workflow, specifically when triggered by pull_request_target, is susceptible to exploitation, allowing an attacker to execute arbitrary code within the GitHub Actions runner environment. This misconfiguration enables an attacker to establish a reverse shell, exfiltrate sensitive secrets, including the highly-privileged GITHUB_TOKEN, and ultimately gain full control over the repository. This is fixed in version 0.23.0a9. |
| A vulnerability was identified in NeuVector, where the enforcer used environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT to generate a command to be executed via popen, without first sanitising their values.
The entry process of the enforcer container is the monitor
process. When the enforcer container stops, the monitor process checks
whether the consul subprocess has exited. To perform this check, the
monitor process uses the popen function to execute a shell command that determines whether the ports used by the consul subprocess are still active.
The values of environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT
are used directly to compose shell commands via popen without
validation or sanitization. This behavior could allow a malicious user
to inject malicious commands through these variables within the enforcer
container. |
| FutureNet MA and IP-K series provided by Century Systems Co., Ltd. contain an OS command Injection vulnerability. A user who logs in to the Web UI of the product may execute an arbitrary OS command. |
| We have identified a buffer overflow issue allowing out-of-bounds write when processing LLMNR or mDNS queries with very long DNS names. This issue only affects systems using Buffer Allocation Scheme 1 with LLMNR or mDNS enabled.
Users should upgrade to the latest version and ensure any forked or derivative code is patched to incorporate the new fixes. |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer.
If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000.
The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer.
There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation.
We recommend upgrading to version 8.0 or beyond. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| SonarQube Server and Cloud is a static analysis solution for continuous code quality and security inspection. A command injection vulnerability exists in SonarQube GitHub Action in version 4.0.0 to before version 6.0.0 when workflows pass user-controlled input to the args parameter on Windows runners without proper validation. This vulnerability bypasses a previous security fix and allows arbitrary command execution, potentially leading to exposure of sensitive environment variables and compromise of the runner environment. The vulnerability has been fixed in version 6.0.0. Users should upgrade to this version or later. |
| Unitree Go2, G1, H1, and B2 devices through 2025-09-20 allow root OS command injection via the hostapd_restart.sh wifi_ssid or wifi_pass parameter (within restart_wifi_ap and restart_wifi_sta). |
| The StrongDM Windows service incorrectly handled input validation. Authenticated attackers could potentially exploit this leading to privilege escalation. |
| The StrongDM macOS client incorrectly processed JSON-formatted messages. Attackers could potentially modify macOS system configuration by crafting a malicious JSON message. |
| The NASA’s Interplanetary Overlay Network (ION) is an implementation of Delay/Disruption Tolerant Networking (DTN). A BPv7 bundle with a malformed extension block causes uncontrolled memory allocation inside ION-DTN 4.1.3s, leading to receiver thread termination and a Denial-of-Service (DoS). The triggering bundle contains an extension block starting at `0x85070201005bbb0e20b4ea001a000927c0...`. The first byte in the extension block (0x85) indicates a CBOR array of five elements of which the first four are numbers (0x07, 0x02, 0x01, 0x00) but the fifth element is a byte string of length 27 (`0x5bbb0e20b4ea001a000927c0...`). The vulnerability seems to be due to processing the fifth element of the array (i.e., the byte string) as replacing it with a number makes the vulnerability no longer be triggered. While parsing this extension block, ION obtains a very large block length, which in the code in `bei.c`:764) seems to be passed from `blockLength` which is an unsigned int, to a 32 bit signed integer `blkSize`. The unsigned to signed conversion causes `blkSize` to hold the value of -369092043, which is then converted into a 64-bit unsigned value inside `MTAKE(blkSize)`, resulting in an attempt to allocate an unrealistic amount of memory, causing the error. As of time of publication, no known patched versions of BPv7 exist. |
| A command injection vulnerability was discovered in the TrustyAI Explainability toolkit. Arbitrary commands placed in certain fields of a LMEValJob custom resource (CR) may be executed in the LMEvalJob pod's terminal. This issue can be exploited via a maliciously crafted LMEvalJob by a user with permissions to deploy a CR. |
| Fujitsu fbiosdrv.sys before 2.5.0.0 allows an attacker to potentially affect system confidentiality, integrity, and availability. |
| In WODESYS WD-R608U router (also known as WDR122B V2.0 and WDR28) due to lack of validation in the langGet parameter in the adm.cgi endpoint, the malicious attacker can execute system shell commands.
The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only version WDR28081123OV1.01 was tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable. |
| mcp-remote is exposed to OS command injection when connecting to untrusted MCP servers due to crafted input from the authorization_endpoint response URL |
