| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 improper authorization allowed overwriting versioned settings of other projects |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 stored XSS on the Users page was possible |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 code injection in parent project Kotlin DSL was possible via subproject settings |
| In JetBrains TeamCity before 2026.2.2 missing authorization allowed project developers to read arbitrary HashiCorp Vault secrets |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 a CSRF attack was possible on the Hub integration settings |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 improper authorization allowed queuing builds with personal changes of other users |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 agent Push authorization keys were predictable |
| The HT Mega Addons for Elementor – Elementor Widgets & Template Builder plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via the 'href attribute of <a> inside .htmega-tab-nav' parameter in all versions up to, and including, 3.2.7 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires a co-installed plugin such as wpDiscuz with its rich editor enabled whose markup allowlist permits span[class] and a[href] storage, an HT Mega Tabs widget present on the same page as the comment section, and a victim user click on the injected anchor link. |
| Missing Authorization vulnerability in Mamunur Rashid ShopBuilder – Elementor WooCommerce Builder Addons shopbuilder allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects ShopBuilder – Elementor WooCommerce Builder Addons: from n/a through 3.4.2. |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in Mamunur Rashid ShopBuilder – Elementor WooCommerce Builder Addons shopbuilder allows Retrieve Embedded Sensitive Data.This issue affects ShopBuilder – Elementor WooCommerce Builder Addons: from n/a through 3.4.3. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: raw: fix use-after-free in rawv6_send_hdrinc()
rawv6_send_hdrinc() caches the route before handing the skb to
l3mdev_ip6_out(). The VRF output path may replace skb->dst and release
the original route, leaving the cached pointer stale.
The function later dereferences that pointer for statistics accounting
and as the output device passed to NF_HOOK(). Its RCU read-side critical
section starts after l3mdev_ip6_out(), so it cannot prevent the old route
from being reclaimed in between.
Reload the route from the current skb destination after
l3mdev_ip6_out() returns.
KASAN reports a slab-use-after-free in rawv6_sendmsg(), with the route
allocated by ip6_dst_alloc(), freed by dst_destroy() from rcu_core(), and
the related RCU callback queued from vrf_l3_out(). |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 remote code execution was possible via external pull requests |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix mremap deadlock when PMD sharing is possible
move_hugetlb_page_tables() holds the mapping's i_mmap_rwsem for
write while moving hugetlb PTEs. This prevents races with truncation
and protects huge_pmd_unshare(), but the move loop must not call
helpers that can acquire the same rwsem for read.
huge_pte_alloc() can do that when the destination can use PMD
sharing: it may call huge_pmd_share(), which takes i_mmap_rwsem for
read while searching for a shareable PMD table. Calling it while the
move path already holds i_mmap_rwsem for write can deadlock.
Avoid that path for PMD-sized hugetlb mappings that can use PMD
sharing. Instead of allocating or sharing the destination page table
while moving, zap the source range and let the destination fault path
populate or share the PMD lazily.
Reuse the hugetlb unmap logic for the source-side zap by splitting
the core loop out of __unmap_hugepage_range(). The wrapper keeps the
existing tlb_start_vma(), tlb_end_vma() and huge_pmd_unshare_flush()
behavior, while move_hugetlb_page_tables() can reuse the unmap loop
with its existing mmu_gather. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Process each host MSR entry at most once when unwinding failed VM-Entry
Add a missing "break" in the inner for-loop of the open coded mess that
unwinds MSRs back to the pre-VM-Enter state when VMLAUNCH/VMRESUME VM-Fails
due to a consistency check that is caught by hardware but missed by KVM.
I.e. move on to the next MSR in the VM-Entry load list after performing a
write using a value found in the VM-Exit load list. Processing *every*
matching entry in the VM-Exit load list makes the processing quadratic,
which is problematic if the load lists are full of MSRs that are expensive
to emulate. E.g. writing APIC_BASE triggers kvm_recalculate_apic_map() and
a whole pile of unnecessary work.
Functionally, arbitrarily restoring the value of the first matching entry
is "fine", because none of this is architecturally correct: the load lists
are never supposed to have been used in the first place. In practice, it's
likely a moot point as no well-behaved VMM will have multiple, diverging
entries in the load lists. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: handle device-exclusive entries in folio_referenced_one()
page_vma_mapped_walk() can return non-present device-exclusive entries,
but folio_referenced_one() passes them to PTE young-bit accessors that
require present PTEs.
We must neither call clear_flush_young_ptes_notify() nor
folio_pte_batch() with non-present entries. For example, clearing the
young bit on non-present PTEs can corrupt the entry: on arm64
PTE_AF overlaps the swap type, so clearing it turns a device-exclusive
entry into an ordinary swap entry.
folio_pte_batch() will VM_WARN_ON_FOLIO.
Apply the same approach as the previous fixes to e.g., damon_ptep_mkold():
treat these entries as old from the CPU's perspective and obtain their
young state through the MMU notifier.
Skip PTE batching and MGLRU look-around for non-present entries, and
don't modify non-present PTEs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: clear stale client pointer on close
p9_usbg_close() tears down the client transport, but usb9pfs keeps
using usb9pfs->client from asynchronous TX and RX completion handlers.
A late completion can therefore dereference a client that has already
been freed during mount teardown.
Clear usb9pfs->client under usb9pfs->lock when closing the transport,
detach any pending TX request from in_req->context, and make the TX/RX
completion handlers bail out once the transport has been detached. This
keeps late completions from touching a freed or rebound p9_client. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: call disable_usb9pfs() from usb9pfs_disable()
usb9pfs_disable() is the usb_function ->disable callback, invoked by
the composite gadget core whenever the host resets or unconfigures
the gadget. The gadget function API requires this callback to disable
its endpoints; every other in-tree function driver does so from its
->disable hook.
usb9pfs_disable() never called disable_usb9pfs(), so the IN/OUT
endpoints and their usb_request objects were left active and
allocated across a host-driven disable. When the host later
reconfigures the device, enable_usb9pfs() calls alloc_requests() again
and unconditionally overwrites usb9pfs->in_req/out_req, permanently
leaking the previous allocations, while the endpoints themselves are
left enabled underneath the function's own idea of being disabled.
Call disable_usb9pfs() before reinit_completion(&usb9pfs->send),
mirroring the same sequence already used in p9_usbg_close(). Placing
it before the reinit_completion() also ensures usb_ep_disable() has
synchronously flushed any requests still queued in hardware before the
completion is reset, closing the same race that motivated resetting
the completion here in the first place. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: set client to Disconnected on usb9pfs_disable
This patch is setting the client status to Disconnected, when the
client is still in use. Otherwise a disconnected usb cable would run
any use of the mount to faults. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: also disable endpoints on p9_usbg_close
The close function has to fully reverse the state change of 9p_create
(mount) and the potential call of set_alt(1). This includes to ensure
that the usage of the endpoints is not active any more. |
| In the Linux kernel, the following vulnerability has been resolved:
9p/trans_virtio: reject mount tags longer than NAME_MAX at probe
p9_virtio_probe() reads a 16-bit mount tag length (tag_len) from the
device config and kzalloc()s tag_len + 1 bytes for chan->tag with no
upper bound. A malicious or compromised host can present a tag of up to
65535 bytes; that tag is later copied into the single-page sysfs buffer
by p9_mount_tag_show() (memcpy(buf, chan->tag, tag_len + 1)), a
host-controlled out-of-bounds write of up to ~64 KiB past the PAGE_SIZE
attribute buffer.
Reject an overlong tag at probe time. A 9p mount tag is a name-like
identifier, so bound it by NAME_MAX (255): that limit is independent of
the sysfs/seq_file page size and is far above any legitimate mount tag,
which keeps p9_mount_tag_show() safe at the root without hard-coding a
seq_file implementation detail. |