| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Description
NGINX Gateway Fabric has a vulnerability when it renders the spec.basic.realm (and spec.jwt.realm) field of a namespaced AuthenticationFilter verbatim, unescaped and unvalidated, into the shared data-plane nginx.conf as auth_basic "<realm>";. A namespaced authenticated attacker that configures AuthenticationFilter CRD to an HTTPRoute/GRPCRoute on a shared Gateway can craft a realm value that closes the quoted directive and the enclosing location {} block and injects arbitrary NGINX directives into that Gateway's data-plane config.
Impact
A remote authenticated attacker can send crafted requests to configure NGINX Gateway Fabric AuthenticationFilter CRD and may be able to read every co-located tenant's mounted secrets, SSRF via proxy_pass, reading the pod ServiceAccount token, or hijacking other tenants' routes. There is no data plane exposure; this is a control plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A flaw was discovered in OpenLDAP before 2.4.57 leading to a double free and slapd crash in the saslAuthzTo processing, resulting in denial of service. |
| A flaw was discovered in OpenLDAP before 2.4.57 leading to an invalid pointer free and slapd crash in the saslAuthzTo processing, resulting in denial of service. |
| Release of invalid pointer or reference in Windows Modern Device Management (MDM) allows an authorized attacker to elevate privileges locally. |
| Release of invalid pointer or reference in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| ImageMagick 7.1.0-20 before 7.1.2-32 contains an invalid memory free vulnerability in the fx operation that occurs when initialization of an FX runtime entry fails. Attackers can trigger the failed FX runtime initialization to cause an invalid free, resulting in memory corruption and application crashes. |
| This CVE ID has been rejected as a duplicate. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure
The goto err label leads to:
genlmsg_cancel(skb, ehdr);
return ret;
If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg.
There's nothing to cancel, and passing an error pointer to
genlmsg_cancel() would cause a crash. |
| Invalid pointer in the JavaScript Engine: JIT component. This vulnerability was fixed in Thunderbird 157 and Firefox 157. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: folio_put() after error
dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of
kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator
corruption.
While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF
by future callers. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: Fix recursive locking on devices without EEH sensitive driver
The commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug
safe") refactored the EEH code such that the pci_rescan_remove_lock is
held at the beginning of eeh_handle_normal_event() and the
eeh_reset_device() is called with that lock being held. Looks like the
commit missed to remove the existing lock/unlock inside eeh_rmv_device()
which is no longer necessary. This is causing the eehd to hang on the
lock which it actually holds when that code path is taken.
[<0>] 0xc00000011c78f870
[<0>] __switch_to+0xfc/0x1a0
[<0>] pci_lock_rescan_remove+0x30/0x44
[<0>] eeh_rmv_device+0x290/0x2e0
[<0>] eeh_pe_dev_traverse+0x80/0x130
[<0>] eeh_reset_device+0xcc/0x23c
[<0>] eeh_handle_normal_event+0x830/0xa80
[<0>] eeh_event_handler+0xf8/0x190
[<0>] kthread+0x194/0x1b0
[<0>] start_kernel_thread+0x14/0x18
The issue is seen for cases where the errors are detected on the PHB
directly AND|OR for devices where the driver error_detected() returns
PCI_ERS_RESULT_NEED_RESET, and driver being not EEH sensitive(i.e no
error handlers like slot_reset(), resume() etc defined). |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid unneeded actions on subflow reset
Once in a blue moon, the mptcp receive path can recursively call
mptcp_data_ready() via state change under unlucky error conditions, and
then try to hold the data lock again.
Break the recursion loop explicitly checking for the exceptional
condition.
Add a new flag instead of using an existing one like 'closing', to exit
early in subflow_state_change(), and explicitly flush the RX queue at
reset time.
This avoids unneeded processing to check for available data -- calling
get_mapping_status() and more on a dying subflow -- but also in error
reporting and worker scheduling.
Note that we must consume the currently peeked skb before invoking
mptcp_dss_corruption to avoid consuming it again after the eventual
reset has freed it. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page
Discarding a cached reader page after a concurrent ring buffer resize
uses the new global subbuf_order for the free_pages() call. This
mismatched order may crashes the kernel or leaks memory because the cached
page was allocated under the old size.
Save the actual free_page order alongside the page address to ensure we
always refer to the correct value and do not rely on the potentially
stalled cpu_buffer->subbuf_order value. The simplest is to make
free_page a buffer_data_read_page which already covers exactly what we
need: a page address and a page order. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| Insufficient validation of untrusted input in ANGLE and GPU in Google Chrome prior to 138.0.7204.157 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init()
padapter->HalData is allocated via vzalloc(), but incorrectly freed
using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to
release this vmalloc-backed buffer can lead to memory corruption.
Use rtw_hal_data_deinit() to pair the free correctly and free
HalData with vfree().
The bug was first flagged by an experimental static analysis tool we
are developing for kernel memory-management bugs. Manual inspection
confirms that the issue is still present in current mainline.
An x86_64 allyesconfig build showed no new warnings. As we do not have
suitable RTL8723BS SDIO hardware to test with, no runtime testing was
able to be performed. |
| An invalid pointer release vulnerability exists in YARA 4.5.8 during deserialization of compiled .yrc rule files. The vulnerability is caused by insufficient validation of external-variable pointers, which may lead to invalid free in yr_rules_destroy() or wild pointer access in yr_object_create(). An attacker can provide a specially crafted .yrc file that causes memory corruption and application crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix circular locking dependency in ocfs2_init_acl()
A lockdep warning indicates a circular locking dependency between
`&oi->ip_xattr_sem` and `&journal->j_trans_barrier`:
WARNING: possible circular locking dependency detected
is trying to acquire lock:
(&oi->ip_xattr_sem){++++}-{4:4}, at: ocfs2_init_acl+0x2fd/0x7e0
fs/ocfs2/acl.c:367
but task is already holding lock:
(&journal->j_trans_barrier){.+.+}-{4:4}, at: ocfs2_start_trans+0x3ab/0x700
fs/ocfs2/journal.c:369
The deadlock involves two code paths: Path 1 (setxattr) where
`ocfs2_xattr_set()` acquires `ip_xattr_sem` (write) and then starts a
transaction, which acquires `j_trans_barrier` (read); and Path 2
(mkdir/mknod) where `ocfs2_mknod()` starts a transaction (`j_trans_barrier`
read) and then calls `ocfs2_init_acl()`, which attempts to acquire
`ip_xattr_sem` (read) on the parent directory to retrieve the default ACL.
Because rw_semaphores are subject to writer priority, a pending writer on
`j_trans_barrier` (e.g., the journal commit thread) can cause Path 1 to
block, while Path 2 is blocked waiting for Path 1 to release
`ip_xattr_sem`.
The patch fixes the lock ordering by precomputing the ACL state before
starting the OCFS2 transaction, while preserving POSIX ACL storage
semantics and the existing inode/security initialization order. By reading
the parent directory's default ACL and preparing the new inode's ACLs
outside the transaction, `ip_xattr_sem` is always acquired before
`j_trans_barrier`.
`struct ocfs2_acl_state` encapsulates the prepared ACL state, while
`ocfs2_acl_init_prepare()` and `ocfs2_acl_init_release()` avoid code
duplication between `ocfs2_mknod()` and `ocfs2_init_security_and_acl()`.
`ocfs2_calc_xattr_init()` and `ocfs2_init_acl()` use this precomputed
state, removing internal `ip_xattr_sem` acquisition and redundant disk
reads.
Additionally, remove the `ip_xattr_sem` acquisition from
`ocfs2_xattr_set_handle()`. This function is only used while initializing a
new inode that has not yet been inserted into the inode hash or attached to
a dentry, meaning there is no risk of concurrent access and the lock is
unnecessary. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2: fix LAYOUTSTATS send buffer exhaustion
encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE),
i.e. 256 bytes, for the layoutupdate4 body written by the layout driver.
The flexfiles record can exceed that.
ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4,
an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server
whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of
those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4
and the bool add a further 144, so the body passes 256 bytes before the
netaddr4 is encoded at all. encode_layoutstats() additionally writes
the deviceid4 and the layoutupdate4 lou_type word, neither of which the
macro accounts for.
The filehandle and the address are both chosen by the server, through
LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the
end of the send buffer. xdr_reserve_space() returns NULL once that
happens, and the two ff_layout_encode_io_latency() calls run with
dss_info->mirror->lock held, so a NULL return there leaves the lock
permanently held.
Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the
reservation. |
