| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Thelia v2.6.0 permits authenticated administrators to upload and install modules via the ZIP upload function without validating or sandboxing embedded PHP code. An attacker can include malicious PHP code in a module's `install()` method which will then be executed upon installation, enabling remote code execution with the privileges of the web server. |
| kin-openapi is a Go project for handling OpenAPI files. From 0.144.0 until 0.147.0, openapi3filter.ValidationHandler validates an operation selected from decoded URL.Path while a downstream gorilla/mux router configured with UseEncodedPath can dispatch a different operation selected from URL.RawPath. When a public exact route and a protected parameterized route use the same method and overlap after decoding, an unauthenticated remote request containing an encoded path separator can be validated as public and then dispatched to the protected handler without invoking the configured AuthenticationFunc. The reachable path parameter is constrained to an encoded representation that decodes to the public literal route, and proxies that canonicalize the URI before forwarding prevent this specific mismatch. This issue is fixed in version 0.147.0. |
| Thelia v2.6.1 contains path traversal and PHP code injection vulnerabilities in its translation editor that can be chained to achieve remote code execution. The `item_name` parameter, used to build the translation file's write path, does not sanitize directory traversal sequences such as `../`. This enables an authenticated user with `UPDATE`-level permissions on `admin.configuration.language` to write files outside the expected `templates/` directory, including to web‑accessible paths. Separately, the translation‑writing logic does not escape `\` in user‑supplied values, allowing inputs to break out of the PHP string literal and inject executable code into the translation file. Chained together, these flaws allow a malicious PHP file to be written to a web-accessible path and executed with the web‑server’s privileges. |
| A flaw has been found in slackero phpwcms up to 1.9.49/1.12.3. This issue affects some unknown processing of the file include/inc_front/content/cnt23.article.inc.php of the component Extension Check. This manipulation of the argument POST_name causes unrestricted upload. The attack can be initiated remotely. Upgrading to version 1.9.50 and 1.12.4 is capable of addressing this issue. Patch name: 118c978430f5a9668b30535f6e592c7ae8df711f/f4c136b467565b2d16ebe2b8276b9a03547a9a69/8571cb47df8d66804d1eb88ae3d1ab4fb513e1e7. Upgrading the affected component is recommended. |
| A flaw has been found in KusalkaSilva Learning-Management-System up to ffeb873f8803f1e9664384ff75000c7da45466d2. Affected is the function getimagesize of the file upload_save.php. Executing a manipulation of the argument uploaded_file/image can lead to unrestricted upload. The attack may be launched remotely. The exploit has been published and may be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet. |
| The Printcart Store (PCDesigner / NB Designer) plugin for WooCommerce is vulnerable to unauthenticated arbitrary file upload leading to remote code execution in all versions up to, and including, 2.9.1 The nbdesigner_copy_image_from_url AJAX action is registered for logged-out callers (wp_ajax_nopriv_), and its Google Drive branch rebuilds the destination filename from the raw, attacker-supplied gapi[name] parameter — bypassing the jpg/jpeg/png/gif allow-list applied on the other branch — and writes the fetched bytes to a web-accessible directory (wp-content/uploads/nbdesigner/temp/). This makes it possible for unauthenticated attackers to write a .php file to a web-served, PHP-executing location and, by supplying their own Google Drive file and OAuth token as the content source, execute arbitrary code on the server. The required save-design nonce is handed to anonymous callers by the nbd_check_use_logged_in endpoint, so it presents no barrier. |
| In the Linux kernel, the following vulnerability has been resolved:
pfifo_tail_enqueue: Drop new packet when sch->limit == 0
Expected behaviour:
In case we reach scheduler's limit, pfifo_tail_enqueue() will drop a
packet in scheduler's queue and decrease scheduler's qlen by one.
Then, pfifo_tail_enqueue() enqueue new packet and increase
scheduler's qlen by one. Finally, pfifo_tail_enqueue() return
`NET_XMIT_CN` status code.
Weird behaviour:
In case we set `sch->limit == 0` and trigger pfifo_tail_enqueue() on a
scheduler that has no packet, the 'drop a packet' step will do nothing.
This means the scheduler's qlen still has value equal 0.
Then, we continue to enqueue new packet and increase scheduler's qlen by
one. In summary, we can leverage pfifo_tail_enqueue() to increase qlen by
one and return `NET_XMIT_CN` status code.
The problem is:
Let's say we have two qdiscs: Qdisc_A and Qdisc_B.
- Qdisc_A's type must have '->graft()' function to create parent/child relationship.
Let's say Qdisc_A's type is `hfsc`. Enqueue packet to this qdisc will trigger `hfsc_enqueue`.
- Qdisc_B's type is pfifo_head_drop. Enqueue packet to this qdisc will trigger `pfifo_tail_enqueue`.
- Qdisc_B is configured to have `sch->limit == 0`.
- Qdisc_A is configured to route the enqueued's packet to Qdisc_B.
Enqueue packet through Qdisc_A will lead to:
- hfsc_enqueue(Qdisc_A) -> pfifo_tail_enqueue(Qdisc_B)
- Qdisc_B->q.qlen += 1
- pfifo_tail_enqueue() return `NET_XMIT_CN`
- hfsc_enqueue() check for `NET_XMIT_SUCCESS` and see `NET_XMIT_CN` => hfsc_enqueue() don't increase qlen of Qdisc_A.
The whole process lead to a situation where Qdisc_A->q.qlen == 0 and Qdisc_B->q.qlen == 1.
Replace 'hfsc' with other type (for example: 'drr') still lead to the same problem.
This violate the design where parent's qlen should equal to the sum of its childrens'qlen.
Bug impact: This issue can be used for user->kernel privilege escalation when it is reachable. |
| When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled. curl --proto -all,-http http://curl.se The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug. |
| Payload is a free and open source headless content management system. In versions before 3.90.0 and canary versions before 4.0.0-canary.34, local upload configurations that accept XML files can store an XML file and stylesheet that execute JavaScript in the Payload origin when a logged-in user opens the file. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34. |
| Payload is a free and open source headless content management system. In versions before 3.90.0 and canary versions before 4.0.0-canary.34, a collection that allows downloadable SVG uploads can store a malicious SVG that bypasses sanitization and executes attacker-controlled JavaScript when a user downloads and opens the SVG. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34. |
| Roo Code through 3.54.0 contains a command approval bypass vulnerability in getCommandDecision() that allows attackers to auto-approve denied shell commands by prefixing them with a bare >& redirect. Attackers using indirect prompt injection can make the allowlist match a redirect target like echo while the shell runs the denied command on the developer machine. |
| The FV Flowplayer Video Player plugin for WordPress is vulnerable to Limited Arbitrary File Upload in all versions up to, and including, 7.5.54.7212 via the check_mimetype function. This is due to incomplete file type validation in the check_mimetype function — while some extension checking is present, it can be bypassed, allowing attacker-supplied remote file content to be written with insufficient extension enforcement and no MIME check or WordPress upload helper. This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. Exploitation requires the plugin's 'profile videos on bio' option to be enabled, as this causes the nonce to be emitted on the subscriber-accessible profile page; without this setting, authenticated users below Editor cannot obtain the required nonce. |
| HCL BigFix Service Management is affected by an Unrestricted File Upload vulnerability due to improper file validation controls, which could allow an unauthenticated attacker to upload and execute malicious payloads, resulting in a complete server compromise. |
| Roo Code through 3.54.0 contains a command approval bypass vulnerability in parseCommandLine() that allows attackers to auto-approve arbitrary shell commands by placing a command substitution in command position. Attackers using indirect prompt injection can submit commands like $(echo touch /tmp/x) that pass the echo allowlist check, causing the shell to execute the output without user approval. |
| The JTL-Connector for WooCommerce plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 2.4.3 via the saveImage() function. This is due to the startSession() function accepting an empty jtlauth parameter as a valid credential, combined with insufficient file type validation in handleImagePush(). This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. |
| A security flaw has been discovered in SourceCodester Library Management System 1.0. This vulnerability affects the function move_uploaded_file of the file admin/add_admin.php. Performing a manipulation of the argument image results in unrestricted upload. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. |
| Roo Code through 3.54.0 contains a command approval bypass vulnerability that allows attackers to run denied shell commands because parseCommandLine() treats ${ command; } substitutions as parameter expansions. Attackers using indirect prompt injection can embed denied commands inside an allowlisted command like echo to execute them without user approval on bash 5.3+ or ksh93. |
| zipfileUpdate in ext/misc/zipfile.c in SQLite 3.30.1 mishandles a NULL pathname during an update of a ZIP archive. |
| OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. From 3.0.0 until 3.8.0, ProcessURI in internal/corazawaf/transaction.go handles a url.ParseRequestURI failure by retaining the raw URI but leaving QUERY_STRING, ARGS_GET, ARGS_GET_NAMES, and the GET-derived portion of ARGS empty. An unauthenticated attacker can place control bytes in a URI passed directly by integrations such as coraza-spoa, coraza-proxy-wasm, custom FFI hosts, or WASM hosts, causing Coraza to omit query parameters that the downstream integration may still process and allowing rules targeting those variables to be bypassed. The bundled coraza/v3/http integration is not affected because Go net/http rejects such malformed request targets before calling Coraza. This issue is fixed in version 3.8.0. |
| OpenCATS is an open-source applicant tracking system and recruitment CRM for staffing agencies and hiring teams. Prior to 0.10.0, the OpenCATS Import module in modules/import/ImportUI.php can preserve an uploaded file's original name for one import data type and place the file in the web-accessible temporary directory. An authenticated user with Import privileges can select the affected import path and upload a PHP file that remains under an attacker-controlled executable filename, and an import error can leave the file on disk. If the temporary directory is served with PHP execution enabled, requesting the staged file can execute arbitrary PHP code with the web server process privileges, exposing or modifying recruiting data and the host system. This issue is fixed in version 0.10.0. |
