| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: rohm-bm1390: Return error when read fails
The data reading function ignores the cached error value, and
unconditionally returns 0. Return cached 'ret' -value after stopping
the measurement so user knows if read failed and data is garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix _gaccess_shadow_fault()
In some circumstances, it is possible that the page of nested guest
memory that is being shadowed is not present at all in the parent guest
gmap. dat_entry_walk() will not find any leaf entry and return with
-ENOENT, which will erroneously be propagated all the way to userspace.
Fix by manually calling gmap_link() on the memory of the nested guest
that is being shadowed if the mapping was not already present. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure
If register_netdev() fails for one of the MTK_MAX_DEVS devices in
mtk_probe(), the error path jumps to err_deinit_ppe, skipping
mtk_unreg_dev(). The previously registered net_devices are then freed by
mtk_free_dev() while still in NETREG_REGISTERED state, hitting the
BUG_ON(dev->reg_state != NETREG_UNREGISTERED).
Route the register_netdev() failure to err_unreg_netdev so the net_devices
registered so far are properly unregistered before being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add better pm_runtime error handling in func probe
Add a common error path in probe that balances the runtime PM reference. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not wake up kswapd in __kfree_rcu_sheaf()
Since kfree_rcu() can be called under pi_lock (a raw spinlock in the
scheduler), kfree_rcu() itself should never allocate memory with
__GFP_KSWAPD_RECLAIM as waking up kswapd ends up acquiring pi_lock,
which leads to a deadlock.
Reproducing the issue even intentionally was not straightforward.
The set_cpus_allowed_force() path that is called under pi_lock is
exercised very rarely, and competing tasks that allocate memory will
most likely wake kswapd up.
Therefore the existence of the deadlock was verified with a modified
kernel that has a lockdep map for waking up kswapd:
======================================================
WARNING: possible circular locking dependency detected
7.2.0-rc1-slab-for-next+ #10 Not tainted
------------------------------------------------------
git/6660 is trying to acquire lock:
ffff8e524533c550 (&p->pi_lock){-.-.}-{2:2}, at: _raw_spin_lock_irqsave+0x12/0x20
but task is already holding lock:
ffff8e57bffff1a0 (&pgdat->kswapd_wait){....}-{3:3}, at: _raw_spin_lock_irqsave+0x12/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&pgdat->kswapd_wait){....}-{3:3}:
__lock_acquire+0x5a4/0xc50
lock_acquire.part.0+0xb7/0x240
lock_acquire+0x70/0x170
__raw_spin_lock_irqsave+0x44/0x80
_raw_spin_lock_irqsave+0x12/0x20
__wake_up_common_lock+0x31/0xa0
__wake_up+0x20/0x40
kswapd_wakeup_wake+0x7e/0x110
wakeup_kswapd+0x295/0x320
wake_all_kswapds+0xac/0x1a0
__alloc_pages_slowpath.constprop.0+0x282/0xf80
__alloc_frozen_pages_noprof+0x32a/0x360
alloc_slab_page+0x2e/0x160
allocate_slab+0x82/0x420
new_slab+0x52/0xb0
refill_objects+0x13d/0x190
refill_sheaf+0x5d/0xd0
__pcs_replace_empty_main+0x230/0xb10
[...]
-> #1 (kswapd_wakeup){-.-.}-{0:0}:
__lock_acquire+0x5a4/0xc50
lock_sync.part.0+0x75/0x100
lock_sync+0x36/0x70
might_wakeup_kswapd+0x61/0xa0
__kfree_rcu_sheaf+0x33/0xd90
kvfree_call_rcu+0x1d4/0x3b0
set_cpus_allowed_force+0x163/0x220
cpuset_cpus_allowed_fallback+0x18b/0x240
select_fallback_rq+0x1e6/0x250
[...]
-> #0 (&p->pi_lock){-.-.}-{2:2}:
check_prev_add+0xe6/0xe00
validate_chain+0x51e/0x6e0
__lock_acquire+0x5a4/0xc50
lock_acquire.part.0+0xb7/0x240
lock_acquire+0x70/0x170
__raw_spin_lock_irqsave+0x44/0x80
_raw_spin_lock_irqsave+0x12/0x20
try_to_wake_up+0x77/0xa90
default_wake_function+0x27/0x60
autoremove_wake_function+0x23/0xb0
__wake_up_common+0xb8/0x170
__wake_up_common_lock+0x51/0xa0
__wake_up+0x20/0x40
kswapd_wakeup_wake+0x7e/0x110
wakeup_kswapd+0x295/0x320
wake_all_kswapds+0xac/0x1a0
__alloc_pages_slowpath.constprop.0+0x282/0xf80
__alloc_frozen_pages_noprof+0x32a/0x360
alloc_slab_page+0x2e/0x160
allocate_slab+0x82/0x420
new_slab+0x52/0xb0
refill_objects+0x13d/0x190
refill_sheaf+0x5d/0xd0
__pcs_replace_empty_main+0x230/0xb10
[...]
other info that might help us debug this:
Chain exists of:
&p->pi_lock --> kswapd_wakeup --> &pgdat->kswapd_wait
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pgdat->kswapd_wait);
lock(kswapd_wakeup);
lock(&pgdat->kswapd_wait);
lock(&p->pi_lock);
*** DEADLOCK ***
3 locks held by git/6660:
#0: ffff8e519f0e9e20 (&type->i_mutex_dir_key#6){++++}-{4:4}, at: lookup_slow+0x2d/0x60
#1: ffffffff8a31c460 (kswapd_wakeup){-.-.}-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix inconsistent arvif state in vdev_create error paths
ath12k_mac_vdev_create() has three error path issues that leave arvif
in an inconsistent state:
1. When ath12k_wmi_vdev_create() fails, the function returns directly
without clearing arvif->ar, which was already set before the WMI
call. Subsequent code checking arvif->ar to determine vdev readiness
will see a non-NULL value despite no vdev existing in firmware.
2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the
code jumped to err: skipping the DP peer cleanup and vdev rollback,
leaving num_created_vdevs, vdev maps and arvif list membership live.
3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to
err_vdev_del: skipping the DP peer cleanup.
Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead
of returning directly, routing both err_peer_del failure paths through
err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating
the arvif state cleanup at err:.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: Don't ignore error route in local/main tables.
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Serialize command queue publishing
Serialize command queue publishing so software producer state advances only
after a command is written and the hardware tail is updated. Wait for
hardware consumption outside the queue lock when the command queue is full
so other CPUs are not blocked behind a long poll. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix iopf_refcount leak on RID domain replacement
intel_iommu_attach_device() enables IOPF for the new domain but never
disables it for the old one. device_block_translation(), called at the
start of the function, tears down translation but does not touch any IOPF
state; blocking_domain_attach_dev() has to call iopf_for_domain_remove()
explicitly before invoking it for exactly this reason.
identity_domain_attach_dev() has the same problem. Its comment claims
that no PRI handling is needed because the device has been put in the
blocking state, but the blocking state and the IOPF reference count are
independent of each other.
As a result, replacing a domain that has an iopf_handler with another
domain at RID level leaks a reference in info->iopf_refcount. The count
never drops back to zero, so iopf_queue_remove_device() is never called
and iommu_disable_pci_pri() triggers its WARN_ON(info->iopf_refcount)
when the device is released.
The PASID paths already handle this correctly by way of
iopf_for_domain_replace(); convert the two RID paths to do the same.
Using the replace helper rather than a bare remove keeps the enable
before the disable, so the reference count does not transiently reach
zero and evict the device from the IOPF queue. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: call _ntfs_bad_inode() when failing to rename
It is safe to call _ntfs_bad_inode on live inodes since:
commit 519b078998ce ("fs/ntfs3: Exclude call make_bad_inode for live nodes.")
The WARN_ON was added when it wasn't safe by:
commit d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails")
Replace the WARN_ON with a call to _ntfs_bad_inode() to prevent further
operations on the inconsistent inode. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: enforce HE/EHT cap/oper consistency
Xiang Mei reports that mac80211 could crash if eht_cap is set
but eht_oper isn't. Rather than fixing that for the individual
user(s), enforce that both HE/EHT have consistent elements. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix error handling in mshv_region_pin
The current error handling has two issues:
First, pin_user_pages_fast() can return a short pin count (less than
requested but greater than zero) when it cannot pin all requested pages.
This is treated as success, leading to partially pinned regions being
used, which causes memory corruption.
Second, when an error occurs mid-loop, already pinned pages from the
current batch are not properly accounted for before calling
mshv_region_invalidate_pages(), causing a page reference leak.
Treat short pins as errors and fix partial batch accounting before
cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix sk_ack_backlog leak on failed handshake
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Check event message buffer response for bad data
The event message buffer response data size got checked later when
processing, but check it right after the response comes back. It
appears some BMCs may return an empty message instead of an error
when fetching events.
There are apparently some new BMCs that make this error, so we need to
compensate. |
| In the Linux kernel, the following vulnerability has been resolved:
udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n
When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0
(success) without actually creating a socket. Callers such as
fou_create() then proceed to dereference the uninitialized socket
pointer, resulting in a NULL pointer dereference.
The captured NULL deref crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764)
[...]
Call Trace:
<TASK>
genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209)
[...]
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1))
__sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1))
__x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)
This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so
callers correctly take their error paths. There is only one caller of
the vulnerable function and only privileged users can trigger it. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler
Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ
handler") introduces a range check for if_id to avoid an out-of-bounds
access. If an out-of-bounds if_id is detected, the interrupt status is
not cleared. This may result in an interrupt storm.
Clear the interrupt status after detecting an out-of-bounds if_id to avoid
the problem.
Found by an experimental AI code review agent at Google. |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: fix dev_pm_opp_find_bw_*() when bandwidth table not initialized
If a driver calls dev_pm_opp_find_bw_ceil/floor() the retrieve bandwidth
from the OPP table but the bandwidth table was not created because the
interconnect properties were missing in the OPP consumer node, the
kernel will crash with:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
...
pc : _read_bw+0x8/0x10
lr : _opp_table_find_key+0x9c/0x174
...
Call trace:
_read_bw+0x8/0x10 (P)
_opp_table_find_key+0x9c/0x174 (L)
_find_key+0x98/0x168
dev_pm_opp_find_bw_ceil+0x50/0x88
...
In order to fix the crash, create an assert function to check
if the bandwidth table was created before trying to get a
bandwidth with _read_bw(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Return right value in iommu_sva_bind_device()
iommu_sva_bind_device() should return either a sva bond handle or an
ERR_PTR value in error cases. Existing drivers (idxd and uacce) only
check the return value with IS_ERR(). This could potentially lead to
a kernel NULL pointer dereference issue if the function returns NULL
instead of an error pointer.
In reality, this doesn't cause any problems because iommu_sva_bind_device()
only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA.
In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will
return an error, and the device drivers won't call iommu_sva_bind_device()
at all. |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability. |
| An issue was discovered in net/netfilter/nf_tables_api.c in the Linux kernel before 5.19.6. A denial of service can occur upon binding to an already bound chain. |
