| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in SSSD's IdP authentication provider. The eval_access_token_buf() function compares the OIDC subject identifier using strncmp() with the authenticated user's identifier length, performing a prefix comparison instead of an exact match. An attacker whose IdP identifier is a strict prefix of a target user's identifier can authenticate as the target user. |
| A deserialization flaw was discovered in the jackson-databind, versions before 2.6.7.1, 2.7.9.1 and 2.8.9, which could allow an unauthenticated user to perform code execution by sending the maliciously crafted input to the readValue method of the ObjectMapper. |
| A deserialization flaw was discovered in the jackson-databind in versions before 2.8.10 and 2.9.1, which could allow an unauthenticated user to perform code execution by sending the maliciously crafted input to the readValue method of the ObjectMapper. This issue extends the previous flaw CVE-2017-7525 by blacklisting more classes that could be used maliciously. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. From 3.15.0 until 4.0.1, the default blockUnsafeOperationsPlugin does not classify trailer.<token>.cmd as unsafe configuration. An application that passes attacker-controlled values through SimpleGitOptions.config or inline -c arguments can therefore allow Git to invoke an attacker-selected shell command when git interpret-trailers processes the configured trailer. The command executes with the operating-system identity and permissions of the Node.js process. This issue is fixed in 4.0.1. |
| An incomplete list of disallowed inputs in Amazon Agent Plugins for AWS databases-on-aws plugin before 1.7.1 might allow a remote unauthenticated actor to execute arbitrary operating system commands on the host running the helper via a crafted database command value introduced in the agent context.
To remediate this issue, users should upgrade to databases-on-aws plugin version 1.7.1 or later and verify that the updated plugin is active in each environment where it is used. |
| In JetBrains TeamCity before 2026.1.3
2025.11.7 kotlin DSL sandbox escape leading to RCE on the server was possible |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.9, the execute_command tool in ufo/client/mcp/http_servers/linux_mcp_server.py treats sort and uniq as read-only commands while the free-form command parameter can select their file-output forms. An authenticated caller can use sort -o or the optional second uniq operand to create or overwrite files writable by the UFO server process without shell metacharacters, because the allowed binary opens the destination itself and the argument policy does not reject the operation. This can corrupt configuration or other writable data and disrupt the service, but the demonstrated primitive does not directly disclose files or establish arbitrary code execution. This issue is fixed in version 3.0.9. |
| Ghost is a Node.js content management system. From 6.0.9 until 6.65.0, a validation issue allowed some functionality, such as Webmentions, to be abused by an unauthenticated user to make limited HTTP requests to hosts in the Ghost server's internal network on some network configurations. A successful attack would not result in any response data being returned. This issue is fixed in version 6.65.0. |
| Ghost is a Node.js content management system. From 2.1.0 until 6.64.0, embedding a URL from an attacker-controlled website could result in untrusted scripts being stored in post content. These scripts could run in the Ghost editor, on the published site, and in newsletter emails, possibly resulting in compromise of a staff user's admin session. This issue is fixed in version 6.64.0. |
| Vim is an open source, command line text editor. Prior to 9.2.0840, runtime/plugin/netrwPlugin.vim loads netrw and runtime/pack/dist/opt/netrw/autoload/netrw.vim constructs Bookmarks, History, and Targets menu entries by interpolating attacker-controlled directory paths into executed :menu commands. s:NetrwBookmarkMenu(), s:NetrwTgtMenu(), g:netrw_menu_escape, EX_TRLBAR, and netrw#MakeTgt() fail to neutralize the | command separator or single quotes at five construction sites, allowing a crafted path browsed or bookmarked in GUI Vim to execute arbitrary Ex and operating-system commands. This issue is fixed in version 9.2.0840. |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT signature segment is affected because signature segment decoding accepts characters outside the canonical Base64URL representation. This occurs when non-Base64URL characters are appended to a valid compact JWS signature segment. As a result, base64url_decode produces the same signature bytes for different serialized segments. Consequently, raw-token revocation checks can fail to recognize an equivalent modified token. This issue is fixed in version 2.14.0. |
| In JetBrains TeamCity before 2026.2,
2026.1.4,
2025.11.8 sandbox escape leading to code execution was possible via the versioned settings Kotlin DSL |
| A build step for a Git source, crafted in a specific way, can bypass some policy validation rules. A malicious build definition can make the repository look like it is coming from a different remote URL than it really is when Git clone is happening. If policy is doing more stricter validation, for example based on commit SHA, commit data, or signatures, then all these validations still apply correctly. |
| OpenClaw is a coding agent distributed as the npm package `openclaw`. In affected versions (2026.7.1 through 2026.7.2), alternate but valid `file:` URL spellings supplied over the Agent Client Protocol (ACP) were treated as relative paths and were incorrectly classified as reads scoped to the session working directory. When an operator connected `openclaw acp client` to an untrusted or compromised ACP peer, that peer could request a read of a file outside the session working directory without the approval prompt normally required for that path, resulting in disclosure of local file contents. The demonstrated impact is limited to file confidentiality; mutating and command-capable tool classes are not affected. This issue is fixed in OpenClaw 2026.8.1. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: acpi: validate WGDS table revision index
Check tbl_rev bounds before BIT(tbl_rev) to avoid undefined shifts when
firmware reports an invalid revision value. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| PeaZip before 11.3.0, in a non-default configuration, is vulnerable to OS command injection via a filename in an archive because "quotation character already used in the string" is mishandled. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Partial String Comparison vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of service. |
| A vulnerability was detected in Nothings stb up to 2c980bb59875b0d32144a71867fbdebb2f77cd20. The impacted element is the function hexwave_init in the library stb_hexwave.h. Performing a manipulation of the argument width/oversample results in integer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in Freedesktop Poppler 26.06.0/26.07.0/26.08.0. This impacts the function FoFiTrueType::cvtSfnts of the file fofi/FoFiTrueType.cc. This manipulation causes integer overflow. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. Patch name: 245d3c6823377755f2c1d5fdddd010279c6ed94d. It is suggested to install a patch to address this issue. |
