Export limit exceeded: 421050 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (94585 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97607 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa: ifcvf: Put device on unsupported feature error Route unsupported provisioned features through the common error path after vdpa_alloc_device() so the allocated device and adapter pointer are released consistently. | ||||
| CVE-2026-97602 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: invalidate queues before flushing them fqdir_pre_exit() flushes the skbs from incomplete queues without changing their completion state. A fragment which found a queue before high_thresh was cleared can then acquire the queue lock and reuse stale reassembly metadata. A queue concurrently killed after fqdir->dead is set can instead become INET_FRAG_COMPLETE|INET_FRAG_HASH_DEAD while still holding its old skbs; skipping it because it is complete leaves those references behind until asynchronous fqdir teardown. For IPv6, stale metadata can make ip6_frag_reasm() use the old nhoffset with a new skb and access memory out of bounds. The resulting heap corruption can be leveraged for local privilege escalation when unprivileged network namespaces are available. Unflushed fragments can also keep conntrack references alive after the conntrack per-net cleanup point. Kill each incomplete queue, then flush every queue still owned by the dying rhashtable. HASH_DEAD identifies that ownership, while complete queues without it are already owned by another destroy path and must be left alone. Releasing a timer reference removed by inet_frag_kill() is deferred to inet_frag_putn(), after the queue lock is dropped. KASAN report: BUG: KASAN: slab-out-of-bounds in ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) Write of size 1 at addr ff110001039c6e00 by task poc/771 Call Trace: ? ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479 (discriminator 5)) ip6_input_finish (net/ipv6/ip6_input.c:534) ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3)) packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) The buggy address belongs to the object at ff110001039c6b40 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 0 bytes to the right of allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) Read of size 1 at addr ff110001039c6e08 by task poc/771 Call Trace: ? ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) ip6_input_finish (net/ipv6/ip6_input.c:534) ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3)) packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) packet_sendmsg (net/packet/af_packet.c:2959 net/packet/af_packet.c:3053 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) The buggy address belongs to the object at ff110001039c6b40 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 8 bytes to the right of allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) | ||||
| CVE-2026-97598 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: bound automatic table ID allocation fib_empty_table() probes every table ID from 1 until it finds a free one. IPv4 tables are stored in a 256-bucket hash table, so a dense set of IDs makes each probe walk a growing hash chain while RTNL is held. Automatic table assignment ("ip rule ... table 0") is an IPv4-only legacy path. Bound the automatically allocated ID to 4096 so the RTNL hold stays bounded, without changing lookups of explicitly specified table IDs. This changes user-visible behavior. A table-0 rule previously received the lowest free ID in 1..RT_TABLE_MAX (0xFFFFFFFF). After this patch the search stops at 4096 and the rule add fails with ENOBUFS if that range is fully occupied. Explicit table IDs above 4096 remain usable. The automatic path is unused in practice: it is IPv4-only, not documented by ip-rule, uncovered by kernel selftests, and both NetworkManager and systemd refuse table 0. | ||||
| CVE-2026-97581 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: hantro: bound G2 HEVC tile loop to the buffer capacity prepare_tile_info_buffer() writes one entry per tile into the tile_sizes DMA buffer, sized for a grid equal to the PPS uAPI array capacity. Use the bounded v4l2_hevc_pps_num_tile_columns() / v4l2_hevc_pps_num_tile_rows() helpers so the loops stay inside the buffer. | ||||
| CVE-2026-97579 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound the copy to the array capacity. | ||||
| CVE-2026-97568 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: syncookies: remember the request backup flag Instead of using an uninitialised bit when copying the info in subflow_ulp_clone(). To fix this, no need to extend the join_entry structure: backup is coming from struct mptcp_subflow_request_sock, only one bit. Do the same here by using one bit for both. | ||||
| CVE-2026-97524 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid unneeded actions on subflow reset Once in a blue moon, the mptcp receive path can recursively call mptcp_data_ready() via state change under unlucky error conditions, and then try to hold the data lock again. Break the recursion loop explicitly checking for the exceptional condition. Add a new flag instead of using an existing one like 'closing', to exit early in subflow_state_change(), and explicitly flush the RX queue at reset time. This avoids unneeded processing to check for available data -- calling get_mapping_status() and more on a dying subflow -- but also in error reporting and worker scheduling. Note that we must consume the currently peeked skb before invoking mptcp_dss_corruption to avoid consuming it again after the eventual reset has freed it. | ||||
| CVE-2026-97510 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Release request if tb_cfg_request() fails in __tb_xdomain_response() If tb_cfg_request() fails setting up the request (for example the control channel is shut down already) it returns an error without calling the callback. To avoid leaking that memory, call tb_cfg_request_put() if tb_cfg_request() fails. | ||||
| CVE-2026-97453 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: validate byte_count in acpi_ps_get_next_package_length() Validate package length reading in acpi_ps_get_next_package_length(). | ||||
| CVE-2026-97451 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix integer overflow in acpi_ex_opcode_3A_1T_1R() (mid_op) Add overflow check for Index + Length to prevent integer overflow when calculating the truncation length. This prevents negative size parameter being passed to memcpy(). | ||||
| CVE-2026-97442 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix invalid data access in ath11k_dp_rx_h_undecap_nwifi In certain cases, hardware might provide packets with a length greater than the maximum native Wi-Fi header length. This can lead to accessing and modifying fields in the header within the ath11k_dp_rx_h_undecap_nwifi() function for the DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and potentially result in invalid data access and memory corruption. Kernel stack is corrupted in: ath11k_dp_rx_h_undecap+0x6b0/0x6b0 [ath11k] Call trace: ath11k_dp_rx_h_mpdu+0x0/0x2e8 [ath11k] ath11k_dp_rx_h_mpdu+0x1e0/0x2e8 [ath11k] ath11k_dp_rx_wbm_err+0x1e0/0x450 [ath11k] ath11k_dp_rx_process_wbm_err+0x2fc/0x460 [ath11k] ath11k_dp_service_srng+0x2e0/0x348 [ath11k] Add a sanity check before processing the SKB to prevent invalid data access in the undecap native Wi-Fi function for the DP_RX_DECAP_TYPE_NATIVE_WIFI decap type. This adapted from the discussion/patch of the ath12k driver [1]. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | ||||
| CVE-2026-97436 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: rework FDB management on the bridge leave path On bridge leave, the dpaa2_switch_port_set_fdb() function always allocates a new FDB for the port which is becoming standalone. In case no FDB is found, then the port leaving a bridge will continue to use the current one. The above logic does not cover the case in which there are multiple bridges which have ports from the same DPSW instance. In this case, when the last port leaves bridge #1, it finds an unused FDB to switch to, but the old FDB is not marked as unused. Since the number of FDBs is equal to the number of DPSW interfaces, this will eventually lead to multiple ports sharing the same FDB. Fix this by changing how we are managing the FDBs on the leave path. Instead of directly allocating a new FDB, first verify if the current port is the last one to leave a bridge. If this is the case, then continue to use the current FDB and only allocate another FDB if there are other ports remaining in the bridge. | ||||
| CVE-2026-97427 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: bound pp_dpm_set_pp_table() memcpy The powerplay path allocates hardcode_pp_table once with kmemdup(..., soft_pp_table_size). memcpy(..., size) used the sysfs store count (up to PAGE_SIZE) with no upper bound, causing heap overflow. Reject writes where size exceeds soft_pp_table_size. | ||||
| CVE-2026-93830 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: xgmac2: disable RBUE in default RX interrupt mask Enabling the RX Buffer Unavailable (RBUE) interrupt is counterproductive and can trigger a MAC interrupt storm under heavy RX pressure. When the DMA runs out of RX descriptors it fires RBUE continuously until software refills the ring. However, RBUE is redundant: the normal RX completion interrupt (RIE) already triggers NAPI, which processes completed descriptors and refills the ring, causing the DMA to resume. The RBUE handler itself only sets handle_rx - the same outcome as RIE. On Agilex5 under heavy RX pressure, the MAC interrupt (which includes RBUE) was observed firing 1,821,811,555 times against only 2,618,627 actual RX completions - a ~695x ratio - confirming the severity of the storm. RBUE does not provide OOM recovery. If page_pool is exhausted, stmmac_rx_refill() cannot advance the DMA tail pointer, the DMA stays suspended, and RBUE fires again on the next NAPI completion - a storm with no forward progress. This patch trades that storm for a clean stall with the same RX outcome. Proper OOM recovery is a pre-existing gap outside the scope of this fix. Note: as a consequence of disabling RBUE, the rx_buf_unav_irq ethtool counter will always read 0 on XGMAC2 devices. This behaviour is already inconsistent across DWMAC core versions. Remove RBUE from XGMAC_DMA_INT_DEFAULT_EN and XGMAC_DMA_INT_DEFAULT_RX to prevent the interrupt storm while keeping normal RX handling intact. | ||||
| CVE-2026-93813 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tree-checker: validate INODE_REF's namelen [BUG] A crafted btrfs image can trigger the following crash: BUG: unable to handle page fault for address: ffffd1dc42884000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page CPU: 9 UID: 0 PID: 1034 Comm: poc Not tainted 7.1.0-rc4-custom+ #383 PREEMPT(full) 46af0a92938a63be7132e0dfd71e62327c51d5c2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:memcpy+0xc/0x10 Call Trace: <TASK> read_extent_buffer+0xe4/0x100 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f] btrfs_get_name+0x15e/0x1e0 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f] reconnect_path+0x165/0x390 exportfs_decode_fh_raw+0x337/0x400 ? drop_caches_sysctl_handler+0xb0/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:memcpy+0xc/0x10 Kernel panic - not syncing: Fatal exception [CAUSE] TThe crafted image has the following corrupted INODE_REF item: item 9 key (258 INODE_REF 257) itemoff 11544 itemsize 4106 index 2 namelen 4096 name: d\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000 The itemsize matches the namelen, but the namelen is 4096, way larger than normal name length limit (BTRFS_NAME_LEN, 255). Meanwhile the memory of the @name is only 255 byte sized, this will cause out-of-boundary access, and cause the above crash. [FIX] Add extra namelen verification for INODE_REF, just like what we have done in ROOT_REF checks. Now the crafted image can be rejected gracefully: BTRFS critical (device dm-2): corrupt leaf: root=5 block=30572544 slot=14 ino=259, invalid inode ref name length, has 4096 expect [1, 255] BTRFS error (device dm-2): read time tree block corruption detected on logical 30572544 mirror 2 [ Rebase, add a Link: tag, add an simple cause analyze ] | ||||
| CVE-2026-93812 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr ndr_encode_v4_ntacl() allocates sd_ndr.data via kzalloc() at entry. If any subsequent ndr_write_*() call returns error during encoding, the allocated sd_ndr.data won't be freed and causes memory leak. Move kfree(sd_ndr.data) into out label to ensure the buffer gets released on all success and error return paths. | ||||
| CVE-2026-93811 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling 1. When ndr_decode_v4_ntacl() fails, the code jumped to free_n_data which only freed n.data, skipping kfree(acl.sd_buf) and leaking the buffer. Zero-initialize struct xattr_ntacl acl, reorder error labels to out_free to release acl.sd_buf on all error paths. 2. if (acl.sd_size < sizeof(struct smb_ntsd)) is true, original code returned success without freeing sd_buf and left stale *pntsd. Set rc = -EINVAL before jumping to out_free to return error code and free buffer. | ||||
| CVE-2026-93795 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix leaks and online flag on radix_tree_insert failure When radix_tree_insert() fails in blkg_create(), the error path has two issues: 1. blkg->online is set to true unconditionally, even when the blkg was never fully inserted. Move the assignment inside the success block. 2. The error path calls blkg_put() without first calling percpu_ref_kill(). Because the refcount is still in percpu mode, percpu_ref_put() only does this_cpu_sub() without checking for zero, so blkg_release() is never triggered. This permanently leaks the blkg memory, its percpu iostat, policy data, the parent blkg reference, and the cgroup css reference — the latter preventing the cgroup from ever being destroyed. Fix by replacing blkg_put() with percpu_ref_kill(), matching the pattern used in blkg_destroy(). | ||||
| CVE-2026-93784 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie() The KASAN allocation trace shows that a malformed IE buffer is stored via SIOCSIWGENIE (cfg80211_wext_siwgenie()) without any validation. The crash trace shows that a subsequent SIOCSIWESSID triggers a connection attempt which calls cfg80211_sme_get_conn_ies() to process the stored IE buffer, causing: - An out-of-bounds read in skip_ie() which reads ies[pos+1] (the length byte) past the end of the 1-byte buffer. - An integer underflow in the memcpy size argument when offs returned by ieee80211_ie_split() exceeds ies_len, causing unsigned subtraction to wrap to SIZE_MAX and triggering a fortify panic. Fix this by validating the IE buffer in cfg80211_wext_siwgenie() before storing it. [drop unnecessary ie_len check, update commit message] | ||||
| CVE-2026-93783 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame rfcomm_recv_frame() casts skb->data to struct rfcomm_hdr and dereferences hdr->addr and hdr->ctrl without validating skb->len first. A truncated frame with skb->len less than the minimum header size causes an out-of-bounds read of uninitialized memory. Additionally, a zero-length frame causes skb->len-- to underflow to UINT_MAX, making skb_tail_pointer() read far past the buffer. Commit 23882b828c3c ("Bluetooth: RFCOMM: validate skb length in MCC handlers") fixed the same class of missing-length-check bugs in the MCC sub-handlers, but the top-level rfcomm_recv_frame() was left unfixed. KMSAN reports: BUG: KMSAN: uninit-value in rfcomm_run ... Uninit was created at: __alloc_skb+0x474/0xb60 vhci_write+0xe9/0x870 Fix this by rejecting frames smaller than sizeof(struct rfcomm_hdr) + 1 (the minimum frame must have a 3-byte header and a 1-byte FCS). | ||||