| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: clear delay state when freeing policy data
iocg_kick_delay() turns sufficiently large debt into an explicit
block-cgroup delay with blkcg_set_delay(), setting blkg->use_delay to
-1 and incrementing blkcg->congestion_count. Clearing it again depends
on iocg_kick_delay() running from the period timer, the waitq timer or
the issue path.
ioc_pd_free() removes the iocg from active_iocgs and cancels its waitq
timer, and no further bios can arrive, so once it has run nothing is
left which can reduce the debt and clear the delay. The blkcg stays
marked congested for the rest of its life.
blk_cgroup_congested() then returns true for every task in that cgroup
and its descendants: page_cache_sync_ra() cuts readahead to a single
page, page_cache_async_ra() skips it altogether, and
__folio_throttle_swaprate() takes swap_avail_lock and schedules a
throttle on anonymous folio allocation.
Clear it explicitly, after the list removal and the synchronous
hrtimer_cancel() so that neither timer processing nor an I/O path can
re-arm it. The free callback can also see policy data which was never
attached to a blkg, hence the pd->blkg check. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix deadlock in complain-mode change_hat
The use of change_hat when in complain mode can cause a deadlock
when the hat doesn't exist and a new learning profile is created
for the missing profile. This is because change_hat() has taken
the lock to search the hat list and creating the new learning
profile needs to take the lock to add it to the list.
From the bug report:
Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su
in complain mode set to change hats. Then verified in newest
available vanilla kernel I've compiled to see if still present:
7.2-rc7 vanilla -> affected
checked also some other kernels:
6.18.44 vanilla -> affected
6.12.95 with debian patches -> unaffected
On systems without bug (for example 6.12.95 debian) it just prints:
aa_change_hat rc=0
On systems with bug, the executable always hangs, prints nothing and
becomes unkillable. (And once stuck this way, it will cause any
further hat changes to also cause the changing process to get stuck)
Then in syslog you can find hint about cause:
kernel: INFO: task hat:3409 blocked for more than 483 seconds.
kernel: Not tainted 7.2.0-rc7 #1
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800
kernel: Call Trace:
kernel: <TASK>
kernel: __schedule+0x48f/0xfe0
kernel: schedule+0x27/0xa0
kernel: schedule_preempt_disabled+0x15/0x30
kernel: __mutex_lock.constprop.0+0x569/0xa10
kernel: aa_new_learning_profile+0x15f/0x210
kernel: build_change_hat+0x19f/0x3b0
kernel: change_hat.isra.0+0x5dd/0xd60
kernel: aa_change_hat+0x2f3/0x710
kernel: aa_setprocattr_changehat+0x121/0x1f0
kernel: do_setattr+0x28c/0x340
kernel: apparmor_setselfattr+0x20/0x50
kernel: security_setselfattr+0xf6/0x110
kernel: __x64_sys_lsm_set_self_attr+0x53/0x90
kernel: do_syscall_64+0xdd/0x5e0
kernel: ? __mod_memcg_lruvec_state+0xfd/0x260
kernel: ? lruvec_stat_mod_folio+0x8d/0xd0
kernel: ? __folio_mod_stat+0x2d/0x90
kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0
kernel: ? do_anonymous_page+0x184/0xa10
kernel: ? __handle_mm_fault+0x805/0x870
kernel: ? count_memcg_events+0xef/0x230
kernel: ? handle_mm_fault+0x1f0/0x2f0
kernel: ? do_user_addr_fault+0x2bb/0x7b0
kernel: ? do_syscall_64+0x94/0x5e0
kernel: ? exc_page_fault+0x75/0x160
kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e
kernel: RIP: 0033:0x7f815e134c8d
kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc
kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d
kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064
kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c
kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010
kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064
kernel: </TASK>
kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409.
To fix the issue, lift the locking out of the core of
aa_new_learning_profile(), introduce a wrapper function that takes the
lock where needed, and have build_change_hat() call the core function
that no longer takes the lock.
In addition fix 4 other issues introduced by commit
32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles")
- aa_get_profile_rcu() was replaced-by: aa_get_profile without the
accompanying rcu_dereference_protected()
- an extra aa_get_label(label) was introduced at the start of
change_hat() without an accompanying aa_put_label() causing a
reference count leak.
- a reference count leak was introduced in the label_is_stale(label)
case, where the newest profile would be leaked instead of the
label passed to the function.
- a potential UAF when the lookup walks up the tree with new_ns != ns
the new label refere
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user()
ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC
login response with
user->passkey_sz = resp->hash_sz;
user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP);
if (user->passkey)
memcpy(user->passkey, resp->hash, resp->hash_sz);
resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is
only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login
response can set hash_sz well beyond that (up to 65535), so the memcpy()
reads past the end of the response object. ipc_validate_msg() does not
bound hash_sz, so reject any response whose hash_sz exceeds the on-stack
hash[] buffer before allocating and copying.
[ 2030.238706] BUG: KASAN: slab-out-of-bounds in ksmbd_alloc_user+0x278/0x680
[ 2030.240549] Read of size 65535 at addr ffff888121bb6680 by task kworker/4:1/18611
[ 2030.242296]
[ 2030.242710] CPU: 4 UID: 0 PID: 18611 Comm: kworker/4:1 Not tainted 7.1.0-next-20260623-virtme #96 PREEMPT(lazy)
[ 2030.242732] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 2030.242743] Workqueue: ksmbd-io handle_ksmbd_work
[ 2030.242763] Call Trace:
[ 2030.242769] <TASK>
[ 2030.242776] dump_stack_lvl+0xa2/0xd0
[ 2030.242794] print_address_description+0x77/0x200
[ 2030.242815] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242831] print_report+0x58/0x70
[ 2030.242848] kasan_report+0x117/0x150
[ 2030.242869] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242888] kasan_check_range+0x3c7/0x3f0
[ 2030.242908] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242925] __asan_memcpy+0x29/0x70
[ 2030.242942] ksmbd_alloc_user+0x278/0x680
[ 2030.242960] ksmbd_login_user+0xc3/0x120
[ 2030.242978] ntlm_authenticate+0x5e6/0x1b00
[ 2030.243017] ? __pfx_ntlm_authenticate+0x10/0x10
[ 2030.243035] ? ksmbd_session_lookup+0x188/0x1d0
[ 2030.243054] ? __pfx_ksmbd_session_lookup+0x10/0x10
[ 2030.243090] ? __sanitizer_cov_trace_switch+0x7b/0x140
[ 2030.243108] smb2_sess_setup+0x1e4a/0x27b0
[ 2030.243126] ? copy_from_kernel_nofault+0x199/0x300
[ 2030.243156] ? __pfx_smb2_sess_setup+0x10/0x10
[ 2030.243173] ? get_smb2_cmd_val+0xe3/0x1c0
[ 2030.243208] handle_ksmbd_work+0x954/0x1280
[ 2030.243230] ? __pfx_handle_ksmbd_work+0x10/0x10
[ 2030.243249] ? process_scheduled_works+0xa07/0x1490
[ 2030.243270] ? process_scheduled_works+0xa07/0x1490
[ 2030.243291] process_scheduled_works+0xa70/0x1490
[ 2030.243320] ? __pfx_process_scheduled_works+0x10/0x10
[ 2030.243340] ? do_raw_spin_lock+0x130/0x300
[ 2030.243358] ? lock_is_held_type+0x7b/0x110
[ 2030.243388] worker_thread+0x932/0xe20
[ 2030.243415] kthread+0x38a/0x470
[ 2030.243431] ? __pfx_worker_thread+0x10/0x10
[ 2030.243451] ? __pfx_kthread+0x10/0x10
[ 2030.243467] ret_from_fork+0x484/0x910
[ 2030.243485] ? __pfx_ret_from_fork+0x10/0x10
[ 2030.243501] ? __switch_to+0xc77/0x12c0
[ 2030.243523] ? __pfx_kthread+0x10/0x10
[ 2030.243540] ret_from_fork_asm+0x1a/0x30
[ 2030.243564] </TASK>
[ 2030.243570]
[ 2030.290164] Allocated by task 19279:
[ 2030.290911] kasan_save_track+0x3e/0x80
[ 2030.292179] __kasan_kmalloc+0x72/0x90
[ 2030.293217] __kvmalloc_node_noprof+0x3ff/0x6b0
[ 2030.294467] handle_generic_event+0x59b/0x750
[ 2030.295345] genl_family_rcv_msg_doit+0x238/0x340
[ 2030.296553] genl_rcv_msg+0x606/0x7b0
[ 2030.297129] netlink_rcv_skb+0x22b/0x4a0
[ 2030.298500] genl_rcv+0x2d/0x40
[ 2030.299273] netlink_unicast+0x7ba/0x930
[ 2030.300019] netlink_sendmsg+0x8c3/0xb00
[ 2030.301073] __sock_sendmsg+0xec/0x140
[ 2030.301579] __sys_sendto+0x357/0x470
[ 2030.302255] __x64_sys_sendto+0xe3/0x100
[ 2030.303425] do_syscall_64+0x135/0x460
[ 2030.304763] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2030.305594]
[ 2030.305819] The buggy address belongs to the object at ffff888121bb6640
[ 2030.305819] which belongs to the cache kmalloc-192 of size 192
[ 2030.309595] The buggy address
---truncated--- |
| CallBackery versions before 0.60.1 for Perl let unauthenticated clients read the POD of any file via path traversal in the /doc route.
Every CallBackery application mounts its documentation plugin at /doc, ahead of any session check. The route passes the requested name to Pod::Simple::Search->find without validation. find splits the name on "::" and joins the parts into a file path, so a name such as "..::..::..::etc::motd" escapes @INC.
Any file the server process can read is reachable. Only POD is rendered, but a file with a POD directive and no "=cut" is POD to the end of the file. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: free preauth sessions on connection teardown
SMB3.1.1 multichannel binding preserves the preauthentication hash in a
preauth_session between the NTLM negotiate and authenticate requests.
The binding NTLM negotiate allocates this object and returns
STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends
the authenticate request, neither the authenticate nor error cleanup paths
free the object.
Release any remaining preauthentication sessions when tearing down the
connection. Initialize the list when allocating the connection so that this
cleanup is safe regardless of the negotiated dialect. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize oplock close with pending break ownership
close may abort an in-flight oplock break while another breaker already
holds an opinfo reference. Releasing pending_break wakes that waiter, but
without serializing the close transition with bit acquisition it can become
a new break owner through the test_and_set_bit() fast path. It can then
overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for
a dying opinfo.
Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode
list. Serialize that transition, pending_break acquisition, and
OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses
the race releases its ownership and returns -ENOENT. Explicitly wake
pending_break waiters during close so they can observe the terminal state.
Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with
OPLOCK_STATE_NONE. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request()
See the procedure below:
ksmbd_tree_conn_connect
ksmbd_share_config_get
share->name = kstrdup() // fail
if (!test_share_config_flag(share, KSMBD_SHARE_FLAG_PIPE)) // false
// do not check `share->name`
ksmbd_ipc_tree_connect_request
strlen(share->name) // null-ptr-deref |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer publishing granted locks to prevent UAF/double-free race
In smb2_lock(), mid-batch granted locks are published to connection-wide
(conn->lock_list) and file-wide (fp->lock_list) lists immediately upon
vfs_lock_file() success, while also remaining tracked on the stack-local
rollback_list.
If a subsequent element in the same SMB2_LOCK request array fails
validation or execution, the thread jumps to out: and walks
rollback_list to undo previously granted locks. However, because the
granted lock was already published to conn->lock_list, a concurrent
UNLOCK request on the same connection can find the lock object and
kfree() it before the rollback loop executes.
When the granting thread subsequently walks rollback_list, it
dereferences and frees the already-freed ksmbd_lock structure, resulting
in a Use-After-Free and Double-Free (on both ksmbd_lock and struct
file_lock).
Fix this by deferring the publication of granted locks to
conn->lock_list and fp->lock_list until after the entire array of lock
elements has been processed without error. Mid-batch grants remain
tracked exclusively on the request-local rollback_list until the whole
batch succeeds, eliminating the race window. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix interlaced ztailpacking pclusters
On-disk sizes of interlaced pclusters should be block-aligned, and
ztailpacking interlaced pclusters should be invalid at all.
Currently, mkfs.erofs won't generate any interlaced pcluster with
ztailpacking enabled, so this doesn't affect any existing valid
filesystems.
However, crafted images can contain invalid interlaced ztailpacking
pclusters, resulting in an out-of-bounds read from a kmap'd page and
copying irrelevant kernel memory into userspace-visible page cache. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely discard unregistered deferred locks
When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on
rollback_list before allocating and registering the asynchronous work.
If either operation fails, rollback assumes that smb_lock->conn is
initialized and dereferences NULL. The deferred file_lock also remains
linked into the VFS blocked-lock state while it is freed.
Keep the lock off rollback_list until async setup succeeds. On setup
failures, explicitly unblock and wake the deferred lock before freeing it
and its ksmbd wrapper. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: detach blocked lock requests before freeing
A file_lock retained by ksmbd for byte-range lock bookkeeping can still
be part of the VFS blocked-request graph. In particular, the VFS can
chain a new waiter below an already blocked request through
flc_blocked_requests. The ksmbd_file reference count does not cover that
graph.
Both __ksmbd_close_fd() and the cross-request unlock path free these
retained file_lock objects directly. If a dependent waiter is still
attached, locks_release_private() hits
BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime
mismatch can leave a freed ksmbd_lock reachable through its request-local
llist.
Detach the file_lock from the blocked-request graph before freeing it in
the close, cross-request unlock, and rollback paths. locks_delete_block()
also wakes requests chained below the object. Remove llist when a
completed lock is published so a globally visible ksmbd_lock no longer
points into the submitting worker's stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size
smb_check_perm_dacl() validates that the DACL fits inside the NT
security descriptor, but then bounds its two ACE walks by the
remaining NTSD length (acl_size) rather than the DACL's declared
size (pdacl_size).
When pdacl->size is smaller than the trailing NTSD buffer, bytes
after the declared DACL boundary - still inside the stored security
descriptor - are parsed as ACEs during access checks. A crafted
DACL can place an access-granting ACE beyond pdacl->size, and the
current code accepts it during SMB2_CREATE access validation, while
parse_dacl() and smb_inherit_dacl() stop at pdacl_size.
Bound both ACE walks by pdacl_size to match the DACL boundary
semantics used elsewhere in the server.
Validation:
- semantic KUnit harness shows the post-boundary ACE is selected
before the fix and rejected (EACCES) after it
- linux master (7.2-rc6), x86_64 |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix session leak in ksmbd_session_register()
See the procedure below:
smb2_sess_setup
ksmbd_smb2_session_create
__session_create
atomic_set(&sess->refcnt, 2)
hash_add(sessions_table, &sess->hlist, sess->id)
ksmbd_session_register
xa_store(&conn->sessions, sess->id, sess) // fail
ksmbd_user_session_put
atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed
Remove the session from sessions_table and drop its table reference if
xa_store() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
pnfs/blocklayout: Fix device leaks on parse failure
bl_parse_concat() and bl_parse_stripe() allocate a child device array and
then parse each child in turn. If parsing a child fails, the failed child is
not counted in nr_children and the parent may be left with a children array
that bl_free_device() will not release when nr_children is zero.
Release the failed child and the already parsed children before returning the
error. Also make bl_free_device() release the child array whenever the
children pointer is set, so that partially initialised concat or stripe
devices are cleaned up correctly.
bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the
file reference. Clear the pointer after fput() so that an outer cleanup path
does not put it again. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers
flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume
the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client
has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so
I/O to a v4.0 flexfiles DS oopses:
- nfs4_init_ds_session() dereferences clp->cl_session->session_state
while seeding the DS lease. It also only seeds cl_lease_time when
NFS4_SESSION_INITING is set; without a session that never happens, so
cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing
every 5 seconds. Seed the lease whenever there is no session and
return before touching session state.
- ff_layout_async_handle_error_v4() dereferences
clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the
v4.0 transport slot table (clp->cl_slot_tbl) when there is no session. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease()
When nfs4_add_lease() races with a delegation return, it calls
nfs4_delete_lease() to clean up. Previously, it passed priv,
which can legitimately be NULL. Passing a NULL priv eventually
leads to a NULL pointer dereference in generic_setlease(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, xdp: move offload check into dev_xdp_install()
bpf_xdp_link_update() calls dev_xdp_install() directly and skips
dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can
make an XDP link with a normal program and then swap in an offloaded or
device-bound program with BPF_LINK_UPDATE, which puts it on the software
path.
dev_xdp_install() is the one place all three paths go through:
"ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and
BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded,
bound to another device, device-bound in generic mode, native vs generic,
DEVMAP and CPUMAP) there, and keep only the netlink-flag check
(XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach(). |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: check for NULL root inode in fuse_fill_super_submount
fuse_iget() can return NULL when its inode allocation fails, but
fuse_fill_super_submount() passed the result straight to get_fuse_inode()
and decremented fi->nlookup without checking it:
root = fuse_iget(sb, parent_fi->nodeid, ...);
fi = get_fuse_inode(root);
fi->nlookup--;
Inside fuse_iget() the inode allocation can fail and return NULL. The
submount root takes the iget5_locked() path, whose alloc_inode() can fail
under memory pressure (the auto-submount branch can fail the same way in
new_inode() or fuse_alloc_submount_lookup()):
inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set,
&nodeid);
if (!inode)
return NULL;
A NULL root makes get_fuse_inode() a container_of() on NULL and the
nlookup decrement a write to a bogus address, oopsing the mount. With
CONFIG_KASAN the following null pointer dereference is reported when the
root inode allocation of an auto-submount fails (e.g. under memory
pressure):
==================================================================
BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0
Read of size 8 at addr 00000000000002b0 by task ls/942
CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15
Call Trace:
<TASK>
fuse_get_tree_submount+0x656/0x8b0
vfs_get_tree+0x48/0x140
fc_mount+0x13/0x50
fuse_dentry_automount+0x7a/0xb0
__traverse_mounts+0xca/0x330
step_into+0x339/0xac0
path_lookupat+0xc5/0x2f0
filename_lookup+0x163/0x2a0
vfs_statx+0xd5/0x200
do_statx+0x83/0xd0
__x64_sys_statx+0xa0/0xc0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x78/0xe2
</TASK>
==================================================================
Return -ENOMEM instead; the caller tears down the partially built
superblock on error, matching the other error returns in this
function. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: don't check the listener's sk_err in vsock_accept()
Syzbot reported an issue which can be reproduced with these steps:
r0 = socket(AF_VSOCK, SOCK_STREAM, 0)
bind(r0, {VMADDR_CID_ANY, PORT})
connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect)
listen(r0, backlog) -> 0
r1 = socket(AF_VSOCK, SOCK_STREAM, 0)
connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0
accept(r0) -> -1, EPROTO (stale sk_err)
Basically, it creates a socket (r0) and triggers a self-connect after
binding it. This self-connect fails with EPROTO because it loops back
to r0 while the socket is still in the TCP_SYN_SENT state, causing it
to be incorrectly dispatched to the connecting-client path. The
unexpected packet type encountered there sets sk_err to EPROTO.
After that, it invokes a listen() call on the same socket. This
listen() call succeeds because the kernel's listening path never
inspects or clears sk_err. Then, a new socket (r1) is created as a
normal client and connects to r0. However, vsock_accept() rejects this
incoming connection because the listener's sk_err still holds the
EPROTO error from the earlier failed self-connect.
This rejection causes the child socket created for r1's connection to
never be freed on virtio or hyperv transports; only the VMCI transport
implements pending_work to revisit and clean up a rejected socket.
For a non-blocking connect(), vsock_connect() may return -EINPROGRESS
immediately, and vsock_connect_timeout() can later set sk->sk_err
asynchronously.
Since no vsock transport ever sets sk_err on a socket while it is in
TCP_LISTEN state, checking it in vsock_accept() serves no purpose and
only carries forward errors left behind by earlier, unrelated
connection attempts on the same socket. Remove the checks so accept()
no longer rejects valid incoming connections because of a stale
error, which also avoids the resource leak described above. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/*
causes use-afer-free crash when either alloc_percpu() or dev_addr_init()
in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device
refcount tracker infrastructure") added ref_tracker_dir_exit() to only
free_netdev() path. |
