| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-Of-Bounds Write, Use of Uninitialized Resource and Use-After-Free vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted SLDDRW or SLDPRT file. NOTE: this vulnerability was SPLIT from CVE-2024-1847. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to corrupt kernel heap memory. |
| Use after free in the UEFI firmware of some Intel(R) Server M20NTP BIOS may allow a privileged user to potentially enable escalation of privilege via local access. |
| A double free vulnerability was found in QEMU virtio devices (virtio-gpu, virtio-serial-bus, virtio-crypto), where the mem_reentrancy_guard flag insufficiently protects against DMA reentrancy issues. This issue could allow a malicious privileged guest user to crash the QEMU process on the host, resulting in a denial of service or allow arbitrary code execution within the context of the QEMU process on the host. |
| Insufficient Resource Pool vulnerability in Ethernet function of Mitsubishi Electric Corporation MELSEC iQ-R series CPU module, MELSEC iQ-L series CPU module, MELSEC iQ-R Ethernet Interface Module, MELSEC iQ-R CC-Link IE TSN Master/Local Module, CC-Link IE TSN Remote I/O Module, CC-Link IE TSN Analog-Digital Converter Module, CC-Link IE TSN Digital-Analog Converter Module, CC-Link IE TSN - CC-Link IE Field Network Bridge Module, CC-Link IE TSN - AnyWireASLINK Bridge Module, CC-Link IE TSN FPGA Module, CC-Link IE TSN Remote Station Communication LSI CP620 with GbE-PHY, MELSEC iQ-R Motion Module, MELSEC iQ-L Motion Module, MELSEC iQ-F FX5 Motion Module, MELSEC iQ-F Series CPU module, MELSEC iQ-F Series Ethernet module, MELSEC iQ-F Series Ethernet/IP module, MELSEC iQ-F Series OPC UA Module, MELSEC iQ-F Series CC-Link IE TSN master/local module, GOT2000 Series CC-Link IE TSN Communication Unit, FR-A800-E series inverters, FR-F800-E series inverters, FR-E800-E series inverters, INVERTER CC-Link IE TSN Plug-in option, INVERTER CC-Link IE TSN Safety Plug-in option, INVERTER CC-Link IE TSN communication function built-in type, MR-J5 series AC Servos MELSERVO, MR-JET series AC Servos MELSERVO, MR-MD333G series AC Servos MELSERVO, MR-JE series AC Servos MELSERVO, MELSERVO-J4 AC Servos MELSERVO and Embedded Type Servo System Controller allow a remote attacker to cause a temporary Denial of Service condition for a certain period of time in Ethernet communication of the products by performing TCP SYN Flood attack. |
| NVIDIA Display Driver for Windows contains a vulnerability where an attacker could trigger a use after free. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. |
| Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a use-after-free via the nav2_amcl process. This vulnerability is triggerd via remotely sending a request for change the value of dynamic-parameter`/amcl max_beams` . |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations
Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.
The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.
The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.
The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.
While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Pixmeo OsiriX MD is vulnerable to a local use after free scenario, which could allow an attacker to locally import a crafted DICOM file and cause memory corruption or a system crash. |
| Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble version was discovered to contain a use-after-free in the nav2_amcl process. This vulnerability is triggered via sending a request to change dynamic parameters. |
| rust-openssl is a set of OpenSSL bindings for the Rust programming language. In affected versions `ssl::select_next_proto` can return a slice pointing into the `server` argument's buffer but with a lifetime bound to the `client` argument. In situations where the `sever` buffer's lifetime is shorter than the `client` buffer's, this can cause a use after free. This could cause the server to crash or to return arbitrary memory contents to the client. The crate`openssl` version 0.10.70 fixes the signature of `ssl::select_next_proto` to properly constrain the output buffer's lifetime to that of both input buffers. Users are advised to upgrade. In standard usage of `ssl::select_next_proto` in the callback passed to `SslContextBuilder::set_alpn_select_callback`, code is only affected if the `server` buffer is constructed *within* the callback. |
| `gix-path` is a crate of the `gitoxide` project (an implementation of `git` written in Rust) dealing paths and their conversions. Prior to version 0.10.11, `gix-path` runs `git` to find the path of a configuration file associated with the `git` installation, but improperly resolves paths containing unusual or non-ASCII characters, in rare cases enabling a local attacker to inject configuration leading to code execution. Version 0.10.11 contains a patch for the issue.
In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` to find the path of a file to treat as belonging to the `git` installation. Affected versions of `gix-path` do not pass `-z`/`--null` to cause `git` to report literal paths. Instead, to cover the occasional case that `git` outputs a quoted path, they attempt to parse the path by stripping the quotation marks. The problem is that, when a path is quoted, it may change in substantial ways beyond the concatenation of quotation marks. If not reversed, these changes can result in another valid path that is not equivalent to the original.
On a single-user system, it is not possible to exploit this, unless `GIT_CONFIG_SYSTEM` and `GIT_CONFIG_GLOBAL` have been set to unusual values or Git has been installed in an unusual way. Such a scenario is not expected. Exploitation is unlikely even on a multi-user system, though it is plausible in some uncommon configurations or use cases. In general, exploitation is more likely to succeed if users are expected to install `git` themselves, and are likely to do so in predictable locations; locations where `git` is installed, whether due to usernames in their paths or otherwise, contain characters that `git` quotes by default in paths, such as non-English letters and accented letters; a custom `system`-scope configuration file is specified with the `GIT_CONFIG_SYSTEM` environment variable, and its path is in an unusual location or has strangely named components; or a `system`-scope configuration file is absent, empty, or suppressed by means other than `GIT_CONFIG_NOSYSTEM`. Currently, `gix-path` can treat a `global`-scope configuration file as belonging to the installation if no higher scope configuration file is available. This increases the likelihood of exploitation even on a system where `git` is installed system-wide in an ordinary way. However, exploitation is expected to be very difficult even under any combination of those factors. |
| An unauthenticated remote attacker can exploit a denial-of-service vulnerability in the device's web server functionality by sending a specially crafted HTTP request with a malicious header, potentially causing the server to crash or become unresponsive. |
| An unauthenticated attacker with access to the local network of the
medical office can use known default credentials to gain remote DBA
access to the Elefant Firebird database. The data in the database
includes patient data and login credentials among other sensitive data.
In addition, this enables an attacker to create and overwrite arbitrary
files on the server filesystem with the rights of the Firebird database
("NT AUTHORITY\SYSTEM"). |
| Insufficient clearing of GPU global memory could allow a malicious process running on the same GPU to read left over memory values potentially leading to loss of confidentiality. |
| A vulnerability was found in PX4 PX4-Autopilot up to 1.15.4. This issue affects the function MavlinkReceiver::handle_message_serial_control of the file src/modules/mavlink/mavlink_receiver.cpp of the component Mavlink Shell Closing Handler. The manipulation of the argument _mavlink_shell leads to use after free. An attack has to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The identifier of the patch is 4395d4f00c49b888f030f5b43e2a779f1fa78708. It is recommended to apply a patch to fix this issue. |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" |
| Use after free in some Intel(R) PROSet/Wireless WiFi and Killerâ„¢ WiFi software for Windows before version 23.80 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
