| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The CC1200 sub-GHz IEEE 802.15.4 driver takes the PHY packet length from the first byte of the radio's RX FIFO in get_packet_length() and validates it in verify_rxfifo_validity() (drivers/ieee802154/ieee802154_cc1200.c). That validation only enforced a lower bound (pkt_len < 3); its second clause rejects a FIFO that holds more bytes than declared and therefore never bounds large values. Because the driver configures the radio for variable packet length with PKT_LEN = 0xFF, the length byte is an over-the-air value of 0-255 that reached net_pkt_rx_alloc_with_buffer() and the subsequent SPI burst read unclamped.
An unauthenticated attacker within radio range can transmit a frame that presents a length byte above the IEEE 802.15.4 maximum of 127 while the chip's 128-byte RX FIFO has not overflowed, so the driver's RX_FIFO_ERROR pre-check does not fire. Reaching this state depends on RF framing and timing, since the RX thread is driven off the PKT_SYNC_RXTX signal and may sample the FIFO before a packet is complete; no pairing, authentication, or user interaction is required.
With the default CONFIG_NET_BUF_FIXED_DATA_SIZE and CONFIG_NET_BUF_DATA_SIZE=128, an allocation larger than one fragment is satisfied by a chain of fragments, but read_rxfifo_content() performs a single SPI burst of pkt_len bytes into the first fragment's buf->data and then calls net_buf_add() with the same length. A length above 128 therefore writes up to 127 bytes past the end of a fragment in the contiguous rx_bufs pool and leaves a net_buf whose len exceeds its capacity. The overflowing bytes are FIFO-underflow output rather than attacker-chosen data, so the practical impact is network-buffer-pool corruption and crashes rather than a controlled write. Only builds that enable CONFIG_IEEE802154_CC1200 with an attached CC1200 radio are affected. |
| Out-of-bounds write in Windows DHCP Server allows an unauthorized attacker to execute code over a network. |
| ZoneMinder is a free, open source closed-circuit television software application. Prior to 1.39.2, 1.38.2, and 1.36.40, ZoneMinder interpolates an unvalidated monitor Device field into shell commands in PHP and Perl control paths when an authenticated user with monitor-create or monitor-edit permission saves a Local monitor whose Device Path contains shell metacharacters and the monitor control or startup path runs. In this attack mechanism, the stored Device value reaches Perl qx() and backtick execution before zmdc.pl argument detainting, while separate PHP command paths use bypassable escapeshellcmd defenses. The attacker can execute arbitrary commands as the web server user. This vulnerability is fixed in 1.39.2, 1.38.2, and 1.36.40. |
| Flyto2 Core is an execution kernel for automation and AI-agent workflows. From 2.26.2 until 2.26.4, the HTTP MCP POST /mcp route accepts unauthenticated JSON-RPC tools/call requests and forwards execute_module arguments to the module registry without the require_auth dependency used by the REST execution routes. An unauthenticated caller can select sandbox.execute_shell and supply its command parameter, which reaches asyncio.create_subprocess_shell with the privileges of the flyto-core server process. The endpoint is reachable locally under the default loopback binding and becomes network reachable when an operator binds the server to a non-loopback interface, allowing arbitrary OS command execution and potential full host compromise. This issue is fixed in version 2.26.4. |
| A relative path traversal vulnerability has been reported to affect QuMagie. If a remote attacker gains an administrator account, they can then exploit the vulnerability to read the contents of unexpected files or system data.
We have already fixed the vulnerability in the following version:
QuMagie 2.9.1 and later |
| The Akamai Guardicore Platform Agent (GPA) before 7.4 for macOS is affected by a local privilege escalation vulnerability within the wapptunneld component. The vulnerability is caused by a lack of input validation when the service uses network interface names to execute system utilities, resulting in command injection. An unprivileged local user with permissions to modify network interface names can exploit this by renaming a network interface to include a malicious shell payload via System Settings. When the "Log out from your IdP" action is subsequently triggered, the wapptunneld service processes the poisoned interface name, leading to the execution of arbitrary commands with root privileges. |
| pfSense CE through 2.9.0 contains an OS command injection vulnerability in the OpenVPN openvpn.connect_async.sh script that allows authenticated VPN users to execute commands as root via crafted usernames. Attackers authenticated through RADIUS or LDAP can use usernames containing single quotes and shell metacharacters to break out of the eval'd pfctl anchor name on connect or disconnect. |
| pfSense CE 2.4.5 through 2.9.0 contains an OS command injection vulnerability that allows authenticated WebGUI users with Advanced Admin Access privilege to execute commands as root via Login Protection settings. Attackers can submit sshguard threshold, block time, or detection time values containing newlines or $(...) that are written unvalidated to sshguard.conf and sourced as root on restart. |
| SoX through 14.4.2 contains a heap out-of-bounds write vulnerability in lsx_ms_adpcm_block_expand_i() in src/adpcm.c, triggered by an odd samplesPerBlock value in the WAV fmt chunk. Attackers can supply a crafted MS ADPCM WAV file to sox or any libsox consumer to write a partially controlled 16-bit sample past the heap buffer allocated by wav_ms_adpcm_fmt(). |
| Out-of-bounds write in Windows Local Security Authority Subsystem Service (LSASS) allows an unauthorized attacker to execute code over a network. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6.0.0 and version 8.7.0.0, LTS2025 release versions 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.60 contain an improper neutralization
of special elements used in an OS command injection vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges. |
| xhtml2pdf before 0.2.19 contains an OS command injection vulnerability in pisa.startViewer() that allows attackers to execute commands by interpolating unescaped file names into os.system. Attackers can supply an input file whose name contains a double quote and shell metacharacters, which runs OS commands as the invoking user when the pisa tool is used with -s/--start-viewer. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6.0.0 and version 8.7.0.0, LTS2025 release versions 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.60 contain an improper neutralization
of special elements used in an OS Command Injection vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges. |
| Out-of-bounds write in libsmkvextractor.so prior to SMR Oct-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6.0.0 and version 8.7.0.0, LTS2025 release versions 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.60 contain an improper neutralization
of special elements used in an OS command ('OS command injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges. |
| An attacker could cause a heap buffer overflow by getting a user to open an email that is greater than or equal to 2GB in size. This vulnerability was fixed in Thunderbird 157, Thunderbird 140.17, and Thunderbird 153.4. |
| Out-of-bounds write in Microsoft Windows PDF allows an unauthorized attacker to execute code over a network. |
| Buffer Overflow vulnerability in libwebsockets main 106d542c allows a remote attacker to cause a denial of service via the LEJP JSON parser |
| CvFWD contained an out-of-bounds write affecting service availability. Software customers upgrade to resolved maintenance release. Software customers upgrade to resolved maintenance release. Update all Commvault installations, including CommServe, Webserver, Command Center, MediaAgents, Clients and HyperScale. |
| Koha is vulnerable to OS command injection in the Task Scheduler deletion path. The tools/scheduler.pl handler accepts the jobid request parameter for op=cud-delete and passes it to C4::Scheduler::remove_at_job without validating it. Schedule::At::remove substitutes the supplied job ID into an atrm command string without quoting or escaping it and executes the command through a single-argument system() call, which invokes the shell. An authenticated staff user with the tools => schedule_tasks permission can therefore execute arbitrary operating-system commands as the Koha web/application user by supplying shell metacharacters in jobid. The issue is fixed in Koha 24.11.20, 25.05.15, 25.11.09, and 26.05.04, and in the 26.11 development branch. |
