| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lzo: reject inline extents without valid headers
[BUG]
For a crafted btrfs image, the following KASAN can be triggered when
reading an inline lzo compressed file extent:
BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700
Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x70
print_report+0xd1/0x610
kasan_report+0xe0/0x110
__asan_report_load_n_noabort+0x13/0x20
lzo_decompress+0x57d/0x700
btrfs_decompress+0x140/0x1c0
uncompress_inline+0x147/0x1b0
btrfs_get_extent+0xb23/0x10a0
btrfs_do_readpage.constprop.0+0x538/0x1ac0
btrfs_readahead+0x32f/0x5f0
read_pages+0x16f/0x850
page_cache_ra_unbounded+0x296/0x490
do_page_cache_ra+0xd9/0x130
page_cache_sync_ra+0x3ee/0x6f0
filemap_get_pages+0x306/0x15c0
filemap_read+0x329/0xd00
btrfs_file_read_iter+0x1f8/0x2b0
vfs_read+0x4ef/0x720
ksys_read+0xf8/0x1d0
__x64_sys_read+0x71/0xb0
x64_sys_call+0x1ab0/0x1b70
do_syscall_64+0x61/0x470
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
[CAUSE]
For an inline lzo compressed file extent, there should always be one lzo
header, recording the total length of the compressed data, followed by
one segment header, recording the compressed lzo payload.
But if a crafted inline lzo compressed file extent contains only an lzo
header, without the segment header or payload, lzo_decompress() will
still try to read the segment header, causing a read beyond the item
boundary.
Furthermore if the inline lzo compressed file extent is the first item
of the leaf, it will be at the extent buffer boundary. The above
out-of-boundary read will go beyond the extent buffer boundary,
triggering the above KASAN report.
[FIX]
Validate the total length of the inlined lzo compressed file extent, to
make sure there is at least one LZO header and one segment header, and a
non-zero payload.
[ Rework the commit message to remove slop ] |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Block VFs from clobbering special CGX PKIND state
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Close speculative mem read possibility
The domain value is extracted from a given CCA or EP11 ioctl struct
when a CPRB is about to be sent. Thus this is a user controlled value.
Under some special conditions (custom device node used, administrative
load) this value is used as an array index after bounds checking, but
without speculation barrier.
Add the missing array_index_nospec() call to prevent speculative
execution where this domain value is used. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate fast symlink target during inode read
ocfs2_validate_inode_block() already rejects several inconsistent
self-contained dinodes before they are exposed to the rest of the
filesystem. Fast symlinks need the same treatment.
A zero-cluster symlink is treated as a fast symlink and later read through
page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses
strnlen() on the inline payload and then copies len + 1 bytes into the
folio. If a corrupt dinode stores an i_size that does not fit the inline
area or omits the terminating NUL at i_size, that copy reads past the end
of the inode block buffer.
Reject zero-cluster symlink dinodes whose i_size exceeds the inline
fast-symlink capacity or whose inline payload is not NUL-terminated
exactly at i_size when the inode block is validated. This keeps malformed
fast symlinks from reaching the read path.
Validation reproduced this kernel report:
KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0
RIP: 0033:0x7f5c6d859aa7
Read of size 3905
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x19f/0x330 (?:?)
kasan_report+0xe0/0x110 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
__asan_memcpy+0x23/0x60 (?:?)
filemap_read_folio+0x27/0xe0 (?:?)
filemap_read_folio+0x35/0xe0 (?:?)
do_read_cache_folio+0x138/0x230 (?:?)
__page_get_link+0x26/0x110 (?:?)
page_get_link+0x2e/0x70 (?:?)
vfs_readlink+0x15e/0x250 (?:?)
touch_atime+0x4d/0x370 (?:?)
do_readlinkat+0x186/0x200 (?:?)
do_user_addr_fault+0x65a/0x890 (?:?)
__x64_sys_readlink+0x46/0x60 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt: fix head underflow on XDP head-grow
The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on
a bnxt machine (and also crashes in NIPA).
It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which
builds the skb head:
napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size);
The problem with this expression is that in page mode, rx_offset is:
bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM;
Which evaluates (at least on x86_64) to 258.
The test test_xdp_native_adjst_head_grow_data tests a case where the
head is adjusted by -256.
When this test runs, data_ptr is shifted to frag_start + 2 (where
frag_start = page_address(page) + offset).
Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb
expression subtracts 258, landing at an address before frag_start. This
could be either the previous fragment or the previous physical page when
the offset is < 256 (e.g. if the fragment started at offset 0).
When the skb is freed, the page pool fragment reference is dropped on
either the wrong page or the wrong frag of the right page. In either
case, the corrupted reference count can lead to the page being
prematurely recycled while still in use. Once (incorrectly) recycled, it
can be handed out again and on driver teardown this would result in a
double free.
The commit under fixes updated this code to handle the case where the
native page size is >= 64k, but it unintentionally broke the head grow
case.
To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the
existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on
allocation and preserve it on reuse.
In bnxt_rx_multi_page_skb, use the newly added offset field to compute
the fragment start and pass that to napi_build_skb. Adjust the layout
with skb_reserve.
There are two cases, the non-adjustment case and the adjustment case.
In both cases, the skb is built at page_address(page) + offset to
account for the case where the native page size >= 64K and skb_reserve
is called with data_ptr - (page_address(page) + offset). That
difference equals bp->rx_offset when data_ptr was not moved, or
bp->rx_offset + xdp_adjust when XDP adjusted the head.
Re-running the failing test with this commit applied causes the test to
run successfully to completion.
The other rx_skb_func implementations don't have this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
The original implementation caused an out-of-bounds memory access
in the sdw_add_element_group_count for-loop when i == num.
for (i = 0; i <= num; i++) {
if (rate == group->rates[i] && lane == group->lanes[i])
...
To fix this error, the function now checks for existing rate/lane
entries in the group(a function parameter) using a for-loop before
adding them.
No functional changes apart from this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate extension-frame layout before RX
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.
The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.
So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size
CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.
Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.
(cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3) |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx()
put_prev_task_scx() warns when a runnable task drops to a lower sched_class
without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have
kept it running. Core scheduling breaks that: a forced-idle SMT sibling
reschedules through the core_pick fast path in pick_next_task(), which skips
pick_task_scx() and thus balance_one(), so a runnable task can drop to idle
with ENQ_LAST unset.
Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core
scheduling forced the idle, while a match (or core scheduling off) still
catches a genuine missing-ENQ_LAST drop. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix MCIA register buffer overflow on 32 dword reads
The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix stack OOB write when prepending the Flags AD
eir_create_adv_data() builds the advertising data into a fixed-size
buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags"
AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies
the per-instance data without checking that it still fits:
memcpy(ptr, adv->adv_data, adv->adv_data_len);
tlv_data_max_len() only reserves those 3 bytes when the user-supplied
flags carry a managed-flags bit, so an instance added with flags == 0 is
accepted with adv_data_len up to the full buffer. At advertise time the
flags are still prepended, and the memcpy() writes 3 + adv_data_len
bytes into the size-byte buffer:
BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301)
Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65
Workqueue: hci0 hci_cmd_sync_work
__asan_memcpy (mm/kasan/shadow.c:106)
eir_create_adv_data (net/bluetooth/eir.c:301)
hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310)
hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:332)
This frame has 1 object:
[32, 64) 'cp'
The "Flags" structure is added by the kernel, not requested by
userspace, so only prepend it when it fits together with the instance
advertising data; when there is no room for both, drop the flags rather
than the user-provided data.
Reachable by a local user with CAP_NET_ADMIN owning an LE-only
controller on the legacy advertising path. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page
nvmet_execute_disc_get_log_page() validates only the dword alignment
of the host-supplied Log Page Offset (lpo). The 64-bit offset is then
added to a small kzalloc'd buffer that holds the discovery log page
and the result is passed straight to nvmet_copy_to_sgl(), which
memcpy()s data_len bytes out to the host with no source-side bound
check:
u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */
size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */
...
if (offset & 0x3) { ... } /* only check */
...
alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req);
buffer = kzalloc(alloc_len, GFP_KERNEL);
...
status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len);
The Discovery controller is unauthenticated -- nvmet_host_allowed()
returns true unconditionally for the discovery subsystem -- so the call
is reachable pre-authentication by any TCP/RDMA/FC peer that can reach
the nvmet target. With a discovery log page of ~1 KiB, an attacker
requesting up to 4 KiB starting at offset == alloc_len reads the next
slab page out and gets its content returned over the fabric (an
empirical run on a default nvmet-tcp loopback target leaked 81
canonical kernel pointers in one Get Log Page response). Pointing the
offset at unmapped kernel memory faults the in-kernel memcpy and
crashes (or panics, on panic_on_oops=1) the target host instead.
The attacker-controlled source-side offset pattern
"nvmet_copy_to_sgl(req, 0, buffer + ATTACKER_OFFSET, ...)" is unique
to nvmet_execute_disc_get_log_page in the entire nvmet codebase: every
other Get Log Page handler in admin-cmd.c either ignores lpo (and
silently starts every response at offset 0) or tracks a local
destination offset with a fixed source pointer.
Validate the host-supplied offset against the log page size, cap the
copy length to what is actually available, and zero-fill any remainder
of the host transfer buffer. The zero-fill matches the existing
short-response pattern in nvmet_execute_get_log_changed_ns()
(admin-cmd.c) and prevents leaking transport SGL contents when the
host asks for more bytes than the log page contains. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/rstat: validate cpu before css_rstat_cpu() access
css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.
A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:
UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
index 2147483647 is out of range for type 'long unsigned int [64]'
Call Trace:
css_rstat_updated
bpf_iter_run_prog
cgroup_iter_seq_show
bpf_seq_read
Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval()
[Why & How]
The aux_rd_interval array in struct dc_lttpr_caps is declared with
MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset
parameter passed to dp_get_eq_aux_rd_interval() can be as large as
MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD.
This leads to an out-of-bounds read of aux_rd_interval[7] when offset
is 8.
Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to
accommodate the full range of valid repeater counts defined by the DP
spec.
(cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate embedded INIT chunk and address list lengths in cookie
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix buffer over-read in rtw_update_protection
rtw_update_protection() is called with a pointer offset into the
ies buffer but the full ie_length is passed, causing a potential
buffer over-read. |
