| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, match_value/3 passes the user-supplied ?name= regular expression to re:run with no match_limit option, and executes it once per resource in the result set. OTP's default 10M match_limit caps each call at roughly 100-200ms, but the regex runs once per resource in the result set. With a large set, for example 5000 queues at 150ms each, a single request consumes 12 or more minutes of CPU. Parallel requests saturate the schedulers. The use_regex=true option is a supported feature on list endpoints, so this path is reachable through normal API use. Preconditions include Any user with the management tag can exploit this.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, get_chunk_selector/1 calls binary_to_atom on the raw client-supplied <<"chunk_selector">> property from post-auth subscribe and resolve_offset_spec frames, with no whitelist and no existing guard. An authenticated stream client with read access to any stream can crash the broker node. Preconditions include rabbitmq_stream plugin enabled Authenticated stream-protocol user with read access to at least one stream. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, ?LOG_DEBUG("shutting down Shovel '~ts', ... Shovel state: ~tp", [Name, State]) formats the entire state map. The 'uris' field holds plaintext URIs after credentials_obfuscation:decrypt (called in rabbit_shovel_util:deobfuscated_uris/2). No format_status/1,2 callback exists in rabbit_shovel_worker to redact it. Triggered when an autodelete shovel (src-delete-after = N) completes. With DEBUG logging enabled, autodelete-shovel completion writes the full shovel state map , including decrypted amqp://user:password@host/ URIs , to the broker log file. Preconditions include Shovel plugin enabled with URI-embedded credentials DEBUG log level (non-default) Autodelete shovel configuration Attacker has log read access. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6, parse_array_primitive/2 for constructor 0x45 (list0) returns an element with byte-width B = 0. The enclosing array32 parser at line 148 reads a 4-byte Count from the wire and loops Count times consuming B bytes each , with B = 0, no input is consumed and the loop builds a list of Count empty elements bounded only by the 32-bit field. The SASL-mechanisms / SASL-init frame is parsed by amqp10_framing:decode_bin/1 from rabbit_amqp_reader.erl:412 before authentication completes. The pre-auth incoming_max_frame_size (default 8192 bytes) caps the frame, not the Count field, so a 19-byte payload with Count = 0xFFFFFFFF is accepted. No max_heap_size is set on the reader process. An unauthenticated network attacker can crash any RabbitMQ node that has the AMQP 1.0 listener enabled (default port 5672) by sending a single ~19-byte frame. The reader process attempts to build a list of ~4 billion empty elements, exhausting heap memory and terminating the Erlang VM. All tenants and protocols on the node lose service. Preconditions include Network reachability to the AMQP listener (port 5672, enabled by default) No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, is_authorized/2 calls rabbit_mgmt_util:is_authorized/2, which checks only the management tag, instead of is_authorized_vhost/2. The /api/queues/quorum/:vhost/:queue/status handler reads the vhost from the path without checking that the user can access it. Any management-tagged user can therefore read Raft status, including leader, members, term, and commit index, for quorum queues in inaccessible vhosts, exposing cross-tenant queue names and cluster topology. The management plugin must be enabled and the attacker must have a management tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.17, 4.0.22, 4.1.13, and 4.2.6, match_origin/1 returned the bare reflected Origin and allowed credentials even when the wildcard "" was configured, so the response echoed the attacker's origin together with Access-Control-Allow-Credentials. The affected code is rabbit_mgmt_cors.erl. When the management plugin is configured with a wildcard CORS origin (cors_allow_origins = ""), the handler reflects the request Origin back in Access-Control-Allow-Origin and also sends Access-Control-Allow-Credentials: true. A malicious web page that a signed-in administrator visits can then use that administrator's cached HTTP Basic credentials to issue authenticated, state-changing requests to the management API. Preconditions include The management plugin is configured with the wildcard cors_allow_origins = "*", which is an explicit operator misconfiguration A target administrator has a cached HTTP Basic-auth session in the browser. This issue is fixed in versions 3.13.17, 4.0.22, 4.1.13, and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, Neither the Web-MQTT handler (deps/rabbitmq_web_mqtt/src/rabbit_web_mqtt_handler.erl:104) nor the Web-STOMP handler (deps/rabbitmq_web_stomp/src/rabbit_web_stomp_handler.erl:102) validates the Origin header on the WebSocket upgrade. Under ssl_cert_login=true, the browser presents the client certificate automatically, so an attacker's JavaScript running in the victim's browser can authenticate as the victim. Preconditions include The non-default configuration use_http_auth=true (Web-STOMP) or ssl_cert_login=true (both plugins) must be enabled. The issue is harmless under the default in-band CONNECT credential configuration.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The shovel management resource's is_authorized/2 delegates to rabbit_mgmt_util:is_authorized_monitor/2, which accepts the monitoring tag. But allowed_methods includes DELETE, and delete_resource/2 deletes / restarts shovel runtime parameters with no additional role check. A monitoring user , intended to have read-only visibility , can therefore delete or restart any shovel in any vhost they can see. A read-only monitoring user can delete or restart any dynamic shovel , a state-changing operation that the equivalent /api/parameters endpoint correctly restricts to policymaker. Preconditions include rabbitmq_shovel + rabbitmq_shovel_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, the optimized AMQP 1.0 server_mode parser in deps/amqp10_common/src/amqp10_binary_parser.erl matches the textual prefixes of symbolic data, sequence, and value body descriptors without verifying their encoded symbol lengths. An authenticated AMQP 1.0 publisher with write permission can submit a well-formed unknown descriptor that begins with a registered body descriptor, and RabbitMQ misclassifies and stores the bytes as a standard body section. Strict AMQP 1.0 consumers can terminate while decoding the stored entry. For bodies misclassified as data, AMQP 0-9-1 or other cross-protocol conversion performs full body decoding and can terminate the consumer protocol process, with acknowledgement-required delivery permitting repeated failures. Sequence and value classifications are normally transported as opaque encoded payloads on that conversion path. The broker remains alive, and the issue does not bypass routing or authorization. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, deps/amqp10_common/src/amqp10_binary_parser.erl materializes each element of AMQP 1.0 arrays whose shared constructor has zero width, while limiting only the number of elements in each array and not the aggregate arrays in a frame. After completing SASL authentication, a low-privilege client can send an ordinary frame containing many individually permitted arrays, causing a small frame to expand into a very large reader-process heap before later frame validation or authorization. Because deps/rabbit/src/rabbit_amqp_reader.erl clears the pre-authentication max_heap_size guard after login, repeated or concurrent frames can trigger the node-wide memory alarm, block publishers, or exhaust broker memory. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, the MQTT 5 parser in deps/rabbitmq_mqtt/src/rabbit_mqtt_packet.erl accepts Request-Problem-Information on PUBLISH packets even though the property is valid only for CONNECT. An authenticated publisher with topic write permission can cause the broker to store and route that inapplicable property to a separately authenticated matching subscriber. When the subscriber path serializes the outbound PUBLISH, serialise_prop/2 has no matching clause, and the uncontained function_clause exception closes the victim MQTT or Web MQTT connection. The publisher connection and broker remain available, and queued replay, retained-message persistence, and broker-wide denial of service were not established. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.18 and 4.0.23 and 4.1.14 and 4.2.9 and 4.3.3, Stored XSS via TLS peer-certificate DN in stream-management UI (sibling of V-11). lines 102/106/110 render peercertsubject / peercertissuer with raw <%= %> and no fmtstring(). RFC4514 backslash-escaping of </> is HTML-inert and bypassable (<img ... //>). Requires non-default config: a stream TLS listener with verifypeer and an attacker-obtainable trusted cert with a malicious Same as the connection.ejs finding, against operators viewing the stream-connection detail rabbitmqstream + rabbitmqstreammanagement enabled with a TLS listener using verifypeer Attacker can obtain a certificate signed by a CA the listener trusts, with attacker-chosen DN An operator views the. This issue is fixed in versions 3.13.18 and 4.0.23 and 4.1.14 and 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, AMQP 1.0 management exchange.declare skips alternate-exchange permission check. pUT /exchanges/:name (lines 192-240) checks only configure on the declared exchange and passes XArgs straight to rabbitexchange:declare/7. It omits the checkreadpermitted(X) + checkwritepermitted(AE) that rabbitchannel.erl:2540-2548 enforces for the alternate-exchange argument on the AMQP 0-9-1 path. The same file already implements the analogous DLX check for queues (lines 708-719), confirming this is a missing-check bug rather than intentional A user with only configure on exchange X can route X's unroutable messages into an alternate exchange they have no write permission AMQP 1.0 enabled (default in RabbitMQ 4.x) Attacker has configure on at least one exchange but lacks write on the target. This issue is fixed in versions 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, OAuth2 isinteger(Exp) guard skips token-expiry checks for float exp. validatetokenexpiry/1 (lines 208-214) and expirytimestamp/1 (138-144) both guard with 'when isinteger(Exp)' and fall through to ok/never for float values. josejwt:verify validates only the signature, not exp. With float exp, no expiry validation occurs anywhere in the If the IdP emits exp as a JSON float (RFC 7519 permits fractional NumericDate), both the login-time expiry check and the mid-connection disconnect timer are silently skipped , an already-expired token is accepted, and connections never time OAuth2 backend enabled IdP emits float exp (uncommon; mainstream IdPs emit integers) Attacker possesses a previously-valid signed. This issue is fixed in versions 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, Shovel does not format state logged by the crash reporter and can leave unencrypted credentials in a crash dump file. the shovel worker genserver processes does not implement the formatstatus/2 callback. When these processes crash (e.g., due to network partitions, connection failures), the OTP SASL error handler writes the full process state , including plaintext AMQP passwords and URIs , to the error log. This is particularly severe for the shovel worker, which stores deobfuscated plaintext URIs (including amqp://user:password@host format) in its genserver state for the entire process Automatic Credential Exposure: Shovel worker crashes (common during network partitions) automatically write plaintext upstream/downstream passwords to error logs No Special Configuration Needed: Unlike DEBUG logging, SASL error reports are always active Broad. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3 and 4.2.9 and 4.1.14 and 4.0.23, Incomplete fix for CVE-2026-44838: escaperegexchar/1 does not escape -, leaving room for an MQTT topic permission bypass. the CVE-2026-44838 fix made expandtopicpermission/2 escape regex metacharacters in expanded topic-permission variables (escaperegex(V)), but escaperegexchar/1 escapes \ ^ $ . | ? + ( ) [ ] { } and omits -. When a topic permission template places {clientid} inside a [...] character class A low-privileged authenticated MQTT user controlling its clientid can broaden topic authorization (read and write) when templates embed {clientid} in a [...] This issue is fixed in versions 4.3.3 and 4.2.9 and 4.1.14 and 4.0.23. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.23, 4.1.14, 4.2.9, and 4.3.3, the optional rabbitmq_jms_topic_exchange plugin's x-jms-topic exchange accepted a client-controlled rjms_erlang_selector binding expression whose LIKE evaluator expanded percent and underscore wildcards into overlapping PCRE fragments. It executed those fragments with raw re:run/3 without match or recursion limits, allowing an authenticated tenant that can bind and publish to consume broker scheduler CPU and deny service with pathological selectors. This issue is fixed in versions 4.0.23, 4.1.14, 4.2.9, and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, the Shovel parameter parser converted attacker-controlled runtime parameter values into non-garbage-collected Erlang atoms before bounding them or checking a fixed allowlist. Exploitation requires network access to the Management HTTP API, valid credentials with both the management and policymaker tags, permission to set Shovel runtime parameters on a vhost, and the rabbitmq_shovel and rabbitmq_shovel_management plugins to be enabled. The attacker can exhaust the node-wide atom table and deny service, and malicious parameters are stored durably and reparsed when workers start, so atom pressure can recur after restart without a live attacker connection. This issue is fixed in versions 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. Prior to 4.3.5, an authenticated user who can bind a queue to a topic exchange and publish to it can use consecutive # segments in a binding key to make both topic matchers revisit the same trie-node and routing-key-suffix states without memoization. The matcher materializes duplicate destinations before deduplication, causing combinatorial CPU work and memory pressure that can disrupt routing for all tenants. This vulnerability is fixed in 4.3.5. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ OAuth credential refresh retains revoked runtime tags. when an existing AMQP connection refreshes from an OAuth token that grants the impersonator tag to a valid same-username token that no longer grants that tag, RabbitMQ updates the OAuth backend implementation (token/scopes/expiry) but leaves the connection's runtime #user.tags unchanged. rabbitaccesscontrol:checkuserid/2 then still honors the stale impersonator tag, so the connection (including newly opened channels) can continue publishing messages with a foreign AMQP userid after that privilege should have been revoked. A fresh connection using the downgraded token correctly refuses the same publish, proving the defect is stale session state rather than the token Limited to connections that once held impersonator and successfully refresh to a downgraded same-username rabbitauthbackendoauth2 (or an equivalent refresh-capable backend that returns tags) is enabled for This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
