Export limit exceeded: 413273 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (40 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-82210 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| Enforceable assertion in the streaming feature of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a malformed stream feedback frame. Root Cause: When handling FRAME_TYPE_FEEDBACK frames, bRPC calls Stream::SetRemoteConsumed() which contains CHECK(_cur_buf_size > 0) and unconditionally asserts CHECK(buf.IsEmpty()) on the frame payload. A feedback frame that carries an unexpected payload, or a feedback frame received on a stream where flow control is disabled (cur_buf_size == 0), reaches these assertions. On failure, CHECK failures abort the process, allowing an unauthenticated single client (once a stream is established) to terminate the server and cause a denial of service. Affected Scenarios: Use bRPC server with the streaming control feature (Stream API) served from untrusted network. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3494 The fix rejects malformed feedback frames with EPROTO and closes only the affected stream instead of crashing the whole process, and it bounds buffer shrinking so cur_buf_size never drops to 0 while flow control is enabled. | ||||
| CVE-2026-82230 | 1 Apache | 1 Brpc | 2026-10-22 | 7.5 High |
| Uncontrolled recursion in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server crash via sending deeply nested mcpack data. Root Cause: The bRPC mcpack2pb parser (used to serve nshead_mcpack / ubrpc / public_pbrpc requests) recursively parses nested objects and arrays without any depth limit. For a protobuf message that references itself (e.g. a repeated message field), the generated parser recurses once per nesting level of the incoming mcpack object. A deeply nested request makes the recursion grow unbounded, overflow the stack and crash the process. Affected Scenarios: Use bRPC server with a recursive-schema protobuf message to serve nshead_mcpack / ubrpc / public_pbrpc requests from untrusted network. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3499 Note: No matter which option you choose, you should know that the fix enforces the documented parsing depth limit MAX_DEPTH (128) on the parse path, the same limit the serializer already applies. If your requests contain mcpack messages nested deeper than 128 levels, the request will be failed after applying the fix. | ||||
| CVE-2026-82231 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| A Thrift client in Apache bRPC (version < 1.18.0, built with WITH_THRIFT which is off by default) can be crashed by the server peer it talks to. When the server returns a T_EXCEPTION reply whose exception struct is malformed, the client decodes it without catching what Apache Thrift throws (TProtocolException, TTransportException or std::length_error). The exception unwinds out of the bthread task function and the process calls std::terminate(), terminating the whole process along with every other in-flight RPC. This is the client response path, so the adversary is the server peer, which THREAT_MODEL.md treats as untrusted. It requires a WITH_THRIFT build (off by default). How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3500 | ||||
| CVE-2026-82425 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| A reachable assertion in Apache bRPC (version < 1.18.0) on all platforms allows a malicious remote peer to crash the process, resulting in denial of service. Root Cause: When a Socket with health checking enabled fails, Socket::WaitAndReset closes its file descriptor while the event dispatcher may still be delivering an input event (EPOLLIN/EVFILT_READ) that was fetched for the just-closed fd. If the health check then succeeds and revives the Socket, Socket::Address succeeds again while the fd is still -1 (the next write reconnects on demand). In that window, Socket::OnInputEvent hits CHECK(!(events & EPOLLIN)) (or the kqueue equivalent) because the Socket is addressable but has no fd. CHECK failures terminate the process when bRPC is built with glog or when the gflag -crash_on_fatal_log is enabled (CHECK always terminates in OFFICIAL_BUILD/NDEBUG builds as well). Affected Scenarios: Applications using bRPC clients with health check enabled (-health_check_interval). A malicious remote peer that the client connects to can deliberately abort connections and immediately accept the health check probes, racing connection teardown against health check revival to trigger the assertion and abort the process. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3510 Note: After applying the fix, stale input events on a Socket revived without an fd are silently dropped instead of triggering the assertion. No user-visible interface or wire protocol is changed. | ||||
| CVE-2026-82942 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| A data race in the RDMA transport of Apache bRPC (versions < 1.18.0) allows a remote client to crash the server process (denial of service) when RDMA is enabled at build time and runtime. Root Cause: When a bRPC server negotiates RDMA with a client, the handshake completes on the TCP fd, but the server kept parsing that fd afterwards as if it were still an RPC channel. The TCP-fd input stream and the RDMA QP input stream (driven by CQ events) shared the same Socket::_read_buf, preferred_index and parsing_context without synchronization. In addition, CQ event processing could start while the handshake parsing was still in progress, and the handshake ACK phase could consume bytes belonging to the next protocol. A remote, unauthenticated client that has completed the RDMA handshake can send data on the TCP fd at the same time RDMA messages are being processed, corrupting the shared input buffer and parser state and crashing the server process (CWE-362, availability impact). Affected Scenarios: Use a bRPC server with RDMA support enabled (built with BRPC_WITH_RDMA and serving rdma:// / SOCKET_MODE_RDMA sockets) and accept connections from untrusted clients. Deployments without RDMA are not affected. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3505 | ||||
| CVE-2026-82953 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| NULL pointer dereference in the RTMP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to crash the server (denial of service) via a crafted createStream command. Root Cause: When an RTMP service rejects a createStream request by returning a null stream from RtmpService::NewStream(), the server sends an error response to the client. If writing this rejection response fails (for example, because the client closes the connection immediately after sending the createStream command), the error-handling path in RtmpChunkStream::OnCreateStream() dereferences the null stream pointer to access stream->_onfail_id, causing the process to crash. Affected Scenarios: Run an Apache bRPC RTMP server whose RtmpService::NewStream() may return null (i.e., the service rejects createStream requests). A remote client that sends a createStream command and then closes the connection before the rejection response is written can crash the server. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3508 | ||||
| CVE-2026-84727 | 1 Apache | 1 Brpc | 2026-10-22 | 5.4 Medium |
| Use-after-free in the RTMP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows a malicious RTMP peer to crash the process or potentially corrupt memory via a crafted Abort message. Root Cause: When processing an RTMP Abort (protocol control message type 2), the RTMP policy implementation deleted the target RtmpChunkStream object. The send path (RtmpUnsentMessage::AppendAndDestroySelf -> RtmpChunkStream::SerializeMessage) runs concurrently on sender threads and dereferences the same RtmpChunkStream object without synchronization. If a remote peer sends an Abort message naming a chunk stream that is concurrently being used to serialize an outgoing message, the stream object is freed while still in use, resulting in a use-after-free. Additionally, deleting the chunk stream discarded its previous message header, so subsequent compressed (type-3) chunk headers on that stream could no longer be decoded. Affected Scenarios: Any application using the bRPC RTMP protocol implementation (rtmp policy), either as an RTMP server or as an RTMP client, where the remote endpoint is untrusted. The attacker needs to send an Abort message targeting a chunk stream id that is concurrently used for sending, which can crash the process or lead to memory corruption. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3515 | ||||
| CVE-2026-84747 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| Interpretation conflict in the HTTP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to bypass access control rules enforced by a front proxy. Root Cause: The method dispatch function FindMethodPropertyByURI() in bRPC's HTTP protocol splits the request path with a string splitter that skips empty fields, so paths containing empty path segments (consecutive slashes), such as //flags, /flags// and /flags//port, are dispatched to the same method as their collapsed form /flags. Per RFC 3986 these are distinct paths. A front proxy that enforces an ACL (e.g. blocking access to builtin services such as /flags) matches the collapsed form only, and therefore forwards the padded literal to the bRPC server, where it is dispatched as if it were the collapsed form. This differential allows //flags?setvalue= to reach a builtin service that /flags is not allowed to reach. Additionally, the HTTP/2 implementation never validated the :path pseudo-header, so requests without a :path, or with a :path that neither begins with '/' nor is the asterisk-form '*', contrary to RFC 9113 section 8.3.1, were not rejected. Affected Scenarios: Deployments of Apache bRPC behind a front proxy or gateway that performs access control (ACL) decisions on the literal request path, where the bRPC server accepts HTTP or HTTP/2 traffic from that proxy. In such deployments an attacker can send a path containing empty path segments to reach a resource that the front proxy intended to block. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3512 Note: After applying the fix, HTTP and HTTP/2 request paths containing empty path segments (consecutive slashes) are rejected by default, and HTTP/2 :path values that are empty or neither begin with '/' nor equal '*' are rejected. Deployments that depend on the previous lenient behavior can restore it by turning on the gflag -http_allow_empty_path_segments, which is not recommended for servers exposed to untrusted traffic. | ||||
| CVE-2026-84748 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| Improper authorization in Apache bRPC (versions < 1.18.0) on all platforms allows remote attackers to access builtin services through the public port. Root Cause: ServerOptions.internal_port is documented to make builtin services (and Tabbed services) reachable only from the internal port, and the HTTP/h2 dispatch path enforced this. However, all protobuf-based protocol dispatch paths (baidu_std, hulu_pbrpc, sofa_pbrpc, and the nshead-based protocols public_pbrpc, nshead_mcpack, nova_pbrpc and ubrpc2pb) computed the security_mode flag but never enforced it between method resolution and method invocation. Since builtin services share the method map with user services, a client able to reach the public port could invoke builtin services such as brpc.vars or hotspots by name over these pb protocols and disclose sensitive runtime information (metrics, flags, profiler data) that the operator intended to expose only via the internal port. Affected Scenarios: Use a bRPC server with ServerOptions.internal_port configured (or with builtin/Tabbed services otherwise expected to be gated by it) while the public port is reachable from an untrusted network and any pb-based protocol is enabled. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3511 | ||||
| CVE-2026-86146 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| Inconsistent interpretation of HTTP requests (HTTP request/response smuggling) in the bundled HTTP/1.1 parser of Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to smuggle requests and inject headers when bRPC is deployed behind a proxy or load balancer that parses the same bytes differently. Root Cause: The bRPC fork of http-parser accepts and acts on several HTTP/1.1 header forms that a conforming front-end either rejects or interprets differently, so the framing or the header set of a message can differ between the front-end and bRPC: 1. A space before the colon of framing headers (e.g. Content-Length : 5) is accepted; the value still drives bRPC's framing while the reported field name contains the trailing space. 2. Interior spaces inside a Content-Length value (e.g. Content-Length: 1 3) are skipped, so bRPC reads 13 where a front-end reads 1 or rejects the message (same class as CVE-2022-32213 in Node.js). 3. Obsolete line folding (obs-fold, RFC 7230 3.2.4) of Content-Length and Transfer-Encoding values is accepted, so a folded framing value drives bRPC's framing while a front-end that does not unfold sees a different message. 4. Chunked trailer fields are fed to the same header callbacks as the header section and are merged into the header map like real headers. A front-end only inspects the header section, so any chunked request can smuggle fields such as Authorization or X-Forwarded-For past it. 5. Transfer-Encoding lists with optional whitespace after a comma (e.g. Transfer-Encoding: gzip, chunked) are not recognized as chunked: such requests are rejected, and responses are read until connection close instead of as chunked, causing response desync. Affected Scenarios: bRPC server or client communicating over HTTP/1.1 with a front proxy, load balancer, or any peer that parses the message independently. An attacker able to send requests through the front-end can desynchronize the two parsers to smuggle requests, forge headers (e.g. Authorization, X-Forwarded-For) via chunked trailers, or desynchronize responses. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3521 Note: After applying the fix, the four header forms above are rejected by default and chunked trailers are dropped instead of merged into the header map. Two gflags are provided for compatibility: http_allow_obs_fold=true restores acceptance of folded Content-Length/Transfer-Encoding values, and http_strict_header_token=true additionally rejects spaces inside any header field name (not only the ones that decide framing). Legitimate clients that do not use these obsolete forms are unaffected. | ||||
| CVE-2026-86147 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| External control of file name or path and uncontrolled resource consumption in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers who can reach the builtin service port to create directories and truncate/overwrite files with the privileges of the server process, or to hold the process-wide CPU/contention profiler for an arbitrarily long time. Root Cause: 1. The builtin /flags service allows gflags carrying a validator to be modified at runtime via ?setvalue=. The bvar/mbvar dump path gflags (bvar_dump_file, bvar_dump_tabs, mbvar_dump_file) were registered with an accept-anything validator whose only purpose was to wake the dumping thread. A remote attacker could therefore repoint the dump path (e.g. GET /flags/bvar_dump_file?setvalue=/victim/dir/target followed by GET /flags/bvar_dump?setvalue=true, or the equivalent for mbvar_dump_file, which is used verbatim without a forced suffix), making the dumping thread recursively create directories and open/truncate files at attacker-chosen locations. Tab names in bvar_dump_tabs were appended to the path without sanitization, allowing '..' to escape the configured directory. 2. The /pprof builtin service did not clamp the ?seconds= parameter to FLAGS_max_profiling_seconds (a limit that /hotspots enforced). A single request such as ?seconds=2147483647 made the handler sleep for decades while holding the process-wide gperftools CPU profiler or bthread contention profiler, so /hotspots/cpu and /hotspots/contention returned 503 for everyone else during that time. Affected Scenarios: Any Apache bRPC server exposing the builtin services (enabled by default on the same port as normal RPC traffic) to untrusted networks. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3523 Note: After the fix, bvar_dump_file, bvar_dump_tabs and mbvar_dump_file can no longer be modified at runtime through the /flags builtin service. They can still be changed programmatically via google::SetCommandLineOption(), taking effect on the next dump cycle. The profiling duration of /pprof is now capped by the -max_profiling_seconds gflag (default 300 seconds), which can be adjusted by the server owner. | ||||
| CVE-2026-86249 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| On a brpc::Server that sets both ServerOptions.auth and ServerOptions.internal_port, the HTTP built-in service exemption on internal_port can be abused to bypass authentication entirely. VerifyHttpRequest() returns true without checking any credential when a built-in service is requested on internal_port, and this verdict is not per - request: verification runs only for the first message of a connection and the result latches the connection. Sending a request such as GET /status to internal_port first authenticates the whole connection, after which every subsequent request dispatched on the same connection is handled without ever calling VerifyHttpRequest(). This lets a remote attacker reach ordinary (non-built-in, non-tabbed) authenticated services without supplying valid credentials whenever the server uses ServerOptions.internal_port together with an Authenticator. The fix restricts internal_port so that it carries only built-in and Tabbed services; requests for ordinary services sent to internal_port are rejected with EPREM / HTTP 403. Mitigation / Fix: upgrade to 1.18.0 or apply PR https://github.com/apache/brpc/pull/3525 . Users who rely on serving normal services on internal_port must move those requests to the port passed to Server::Start(). | ||||
| CVE-2026-87849 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| The Discovery naming-service reply parser in Apache bRPC (versions < 1.18.0) calls RapidJSON object-only accessors (FindMember) on JSON values without first validating that those values are objects. A malformed Discovery response whose data/service members or instances list contain non-object entries (e.g. a bare integer) triggers the RapidJSON object-access precondition on the client, reading memory out of bounds and potentially crashing the bRPC client. Root Cause: In src/brpc/policy/discovery_naming_service.cpp, DiscoveryNamingService::GetServers() and DiscoveryNames::ListDiscoveryNodes() access JSON values with member functions on non-object values. RapidJSON only defines these operations for object types; invoking them on a non-object violates the class invariant and results in undefined behavior (out-of-bounds read), commonly crashing the process. Affected Scenarios: An operator-configured (or compromised) Discovery backend returns a malformed /discovery/nodes or /discovery/fetchs response whose data/service/instance entries are not JSON objects, crashing any bRPC client that refreshes its server list. How to Fix: 1. Upgrade bRPC to version 1.18.0 or later, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3533 The fix validates that the Discovery response data, per-service data, and instance entries are JSON objects (and skips non-object node/instance entries and rejects non-object data/service values) before calling member accessors. | ||||
| CVE-2026-90484 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| The MySQL client response parser in Apache bRPC dereferences a null pointer when the server peer sends a zero-payload-length response packet. A response packet whose declared payload length is zero is accepted by the frame-length check (is_full_package), after which the parser reads the response type byte via an unbounded 5-byte fetch that returns nullptr, and type = p[4] dereferences it, crashing the client process. Root Cause: In brpc::policy::MysqlReply::ConsumePartialIOBuf, buf.fetch(header, 5) returns nullptr when the buffered data only holds the 4-byte header of a zero-length packet, then the code reads p[4] (and, in the fast-auth path, p2[4]) without checking for a null or zero-length packet. Affected Scenarios: A brpc MySQL client connecting to a malicious or compromised MySQL server (or a MITM) can be crashed by a zero-length server response packet, resulting in denial of service of the client. Fix: The fix rejects zero-length response packets (returning PARSE_ERROR_ABSOLUTELY_WRONG) both for the initial response type determination and after a fast-auth marker, before reading the type byte. Upgrade to the Apache bRPC version 1.18.0 or apply the PR patch at https://github.com/apache/brpc/pull/3536. | ||||
| CVE-2025-60021 | 1 Apache | 1 Brpc | 2026-02-26 | 9.8 Critical |
| Remote command injection vulnerability in heap profiler builtin service in Apache bRPC ((all versions < 1.15.0)) on all platforms allows attacker to inject remote command. Root Cause: The bRPC heap profiler built-in service (/pprof/heap) does not validate the user-provided extra_options parameter and executes it as a command-line argument. Attackers can execute remote commands using the extra_options parameter.. Affected scenarios: Use the built-in bRPC heap profiler service to perform jemalloc memory profiling. How to Fix: we provide two methods, you can choose one of them: 1. Upgrade bRPC to version 1.15.0. 2. Apply this patch ( https://github.com/apache/brpc/pull/3101 ) manually. | ||||
| CVE-2025-59789 | 1 Apache | 1 Brpc | 2025-12-02 | 7.5 High |
| Uncontrolled recursion in the json2pb component in Apache bRPC (version < 1.15.0) on all platforms allows remote attackers to make the server crash via sending deep recursive json data. Root Cause: The bRPC json2pb component uses rapidjson to parse json data from the network. The rapidjson parser uses a recursive parsing method by default. If the input json has a large depth of recursive structure, the parser function may run into stack overflow. Affected Scenarios: Use bRPC server with protobuf message to serve http+json requests from untrusted network. Or directly use JsonToProtoMessage to convert json from untrusted input. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.15.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3099 Note: No matter which option you choose, you should know that the fix introduces a recursion depth limit with default value 100. It affects these functions: ProtoMessageToJson, ProtoMessageToProtoJson, JsonToProtoMessage, and ProtoJsonToProtoMessage. If your requests contain json or protobuf messages that have a depth exceeding the limit, the request will be failed after applying the fix. You can modify the gflag json2pb_max_recursion_depth to change the limit. | ||||
| CVE-2025-54472 | 1 Apache | 1 Brpc | 2025-11-04 | 7.5 High |
| Unlimited memory allocation in redis protocol parser in Apache bRPC (all versions < 1.14.1) on all platforms allows attackers to crash the service via network. Root Cause: In the bRPC Redis protocol parser code, memory for arrays or strings of corresponding sizes is allocated based on the integers read from the network. If the integer read from the network is too large, it may cause a bad alloc error and lead to the program crashing. Attackers can exploit this feature by sending special data packets to the bRPC service to carry out a denial-of-service attack on it. The bRPC 1.14.0 version tried to fix this issue by limited the memory allocation size, however, the limitation checking code is not well implemented that may cause integer overflow and evade such limitation. So the 1.14.0 version is also vulnerable, although the integer range that affect version 1.14.0 is different from that affect version < 1.14.0. Affected scenarios: Using bRPC as a Redis server to provide network services to untrusted clients, or using bRPC as a Redis client to call untrusted Redis services. How to Fix: we provide two methods, you can choose one of them: 1. Upgrade bRPC to version 1.14.1. 2. Apply this patch ( https://github.com/apache/brpc/pull/3050 ) manually. No matter you choose which method, you should note that the patch limits the maximum length of memory allocated for each time in the bRPC Redis parser. The default limit is 64M. If some of you redis request or response have a size larger than 64M, you might encounter error after upgrade. For such case, you can modify the gflag redis_max_allocation_size to set a larger limit. | ||||
| CVE-2024-23452 | 1 Apache | 1 Brpc | 2025-06-04 | 7.5 High |
| Request smuggling vulnerability in HTTP server in Apache bRPC 0.9.5~1.7.0 on all platforms allows attacker to smuggle request. Vulnerability Cause Description： The http_parser does not comply with the RFC-7230 HTTP 1.1 specification. Attack scenario: If a message is received with both a Transfer-Encoding and a Content-Length header field, such a message might indicate an attempt to perform request smuggling or response splitting. One particular attack scenario is that a bRPC made http server on the backend receiving requests in one persistent connection from frontend server that uses TE to parse request with the logic that 'chunk' is contained in the TE field. in that case an attacker can smuggle a request into the connection to the backend server. Solution: You can choose one solution from below: 1. Upgrade bRPC to version 1.8.0, which fixes this issue. Download link: https://github.com/apache/brpc/releases/tag/1.8.0 2. Apply this patch: https://github.com/apache/brpc/pull/2518 | ||||
| CVE-2023-45757 | 1 Apache | 1 Brpc | 2025-02-13 | 6.1 Medium |
| Security vulnerability in Apache bRPC <=1.6.0 on all platforms allows attackers to inject XSS code to the builtin rpcz page. An attacker that can send http request to bRPC server with rpcz enabled can inject arbitrary XSS code to the builtin rpcz page. Solution (choose one of three): 1. upgrade to bRPC > 1.6.0, download link: https://dist.apache.org/repos/dist/release/brpc/1.6.1/ 2. If you are using an old version of bRPC and hard to upgrade, you can apply this patch: https://github.com/apache/brpc/pull/2411 3. disable rpcz feature | ||||
| CVE-2023-31039 | 1 Apache | 1 Brpc | 2025-02-13 | 9.8 Critical |
| Security vulnerability in Apache bRPC <1.5.0 on all platforms allows attackers to execute arbitrary code via ServerOptions::pid_file. An attacker that can influence the ServerOptions pid_file parameter with which the bRPC server is started can execute arbitrary code with the permissions of the bRPC process. Solution: 1. upgrade to bRPC >= 1.5.0, download link: https://dist.apache.org/repos/dist/release/brpc/1.5.0/ https://dist.apache.org/repos/dist/release/brpc/1.5.0/ 2. If you are using an old version of bRPC and hard to upgrade, you can apply this patch: https://github.com/apache/brpc/pull/2218 https://github.com/apache/brpc/pull/2218 | ||||