| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mmu_gather: fix flushing ranges with 4 GiB or larger
__tlb_adjust_range() takes the size of the range which has to be flushed
as an unsigned int. Its callers, tlb_flush_{pte,pmd,pud,p4d}_range(), get
and pass an unsigned long. Consequently, a range that is 4 GiB or larger
gets truncated, possibly to 0.
On arm64 with hugetlb, a 64k kernel can have 16 GiB hugetlb folios
mapped contiguously at the PMD level and flush them when unmapping, and a
16k kernel can flush 64 GiB PUDs through tlb_unshare_pmd_ptdesc(). So
at least these two scenarios are affected.
Fix it by flushing the proper range instead of the truncated one by
properly using "unsigned long" for range_size.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: use two-tab indent, simplify description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mmu_notifier: finish non-blocking interval invalidation on error
When an ordinary MMU notifier rejects a non-blocking invalidation, the
interval invalidation started beforehand is left unfinished: the caller
skips mmu_notifier_invalidate_range_end(). Subsequent interval notifier
operations can then wait forever.
The only in-tree trigger is nouveau SVM, which uses both notifier types
and rejects non-blocking invalidations. Reaping via the OOM reaper or
process_mrelease() can therefore leave the GPU fault worker stuck,
holding a reference that prevents the dying process's address space
and memory from being freed.
End the interval invalidation when an ordinary notifier fails a
non-blocking invalidation, like mn_itree_invalidate() already does when
an interval notifier fails. Make that handling clearer in the
documentation of mmu_notifier_invalidate_range_start_nonblock().
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: simplify description, update function doc ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mmu_notifier: set ->mm only after mmgrab()
Radeon uses a non-NULL notifier->mm to decide whether to call
mmu_interval_notifier_remove() when freeing a buffer object.
__mmu_interval_notifier_insert() sets ->mm before validating the range,
so a wrapping userptr range can leave ->mm set after insertion fails.
Cleanup then tries to remove an unregistered notifier for which no mm
reference was acquired.
Set ->mm only after mmgrab(), once insertion can no longer fail. While
we could fix radeon's code instead, setting ->mm on success only makes
the code more robust.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/madvise: fix data loss from MADV_FREE on a KSM page
MADV_FREE can clear the dirty flag of a singly mapped KSM folio. The
folio remains in the stable tree and can gain new mappings without being
dirtied again. Once marked lazyfree, reclaim can discard data that those
mappings still need.
KSM always marks a folio dirty when converting it to a KSM folio in
try_to_merge_one_page(). Marking a folio lazyfree clears PG_swapbacked
but leaves PG_dirty unchanged. Preserving PG_dirty makes reclaim restore
PG_swapbacked instead of discarding the folio. This also protects folios
that were already lazyfree when KSM converted them.
Skip KSM folios before clearing their dirty flag, checking under the
folio lock to serialize with KSM conversion. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory: reject remote COW faults on PFN mappings
When handling a COW fault without a normal source page (PFN mappings),
__wp_page_copy_user() copies from the faulting user address. For remote
faults, this accesses the wrong address space, resulting in wrong data
getting copied.
For example, user_events updates an enable bit in the registering
process's memory. If that memory needs to be faulted in,
user_event_enabler_fault_fixup() calls fixup_user_fault() from a work
item. Placing the enable bit in a private PFN mapping can trigger this
remote COW path.
Reject these faults with VM_FAULT_SIGBUS when the target mm differs from
current->mm: remote faults. Ordinary (non-PFN) mappings are not affected.
The user-address copy dates back to commit 6aab341e0a28 ("mm: re-architect
the VM_UNPAGED logic"); likely, actual ways to get remote faults in
there on COW PFN mappings appeared afterwards. But the fix is simple and
straight forward.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify comment and description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix unmap_mapping_range() beyond 4 GiB on 32-bit
Commit 9eab0421fa94 ("mm: fix unmap_mapping_range high bits shift bug")
made holebegin and holelen unsigned before they are shifted, by casting
them to pgoff_t. That is an unsigned long: on a 32-bit kernel the cast
cuts off the upper half of the two loff_t values, so a hole which begins
at 4 GiB or beyond is taken for one in the first 4 GiB of the file.
truncate_pagecache() passes the new size of the file and asks for private
COWed pages to be unmapped as well. If a file of 6 GiB is truncated to
5 GiB, everything from 1 GiB on is unmapped, and what a process has
written to a private mapping of the range between 1 GiB and 5 GiB is
lost: it reads the contents of the file again.
Where the range has an end, the wrong range is unmapped instead of the
right one. The page cache copes with that, as it unmaps every folio that
it removes. The callers which only have unmap_mapping_range() to get
rid of user mappings do not, for example drm_vma_node_unmap(), whose fake
offsets reach beyond 4 GiB on 32-bit, and revoke_iomem() with physical
addresses of more than 32 bits.
Cast to u64 instead. Nothing changes for 64-bit kernels.
Fix generated by an LLM and sent by Josef Bacik in private. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix unkillable fault loop on MAP_DROPPABLE memory
handle_mm_fault() suppresses VM_FAULT_OOM for VM_DROPPABLE mappings.
For user-mode faults, pending signals are processed before retrying the
access. Kernel-mode faults on user buffers instead return directly to
the faulting instruction.
With persistent allocation failures (esp. memcg limits), a syscall,
such as write(), can therefore loop while not dropping locks.
Only suppress VM_FAULT_OOM when FAULT_FLAG_USER is set, allowing
kernel-mode faults and GUP to fail and signal allocation errors.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix deadlock of mremap() against UFFDIO_MOVE
With per-VMA locks, UFFDIO_MOVE can run concurrently with mremap()
on different VMAs in the same mm. Those VMAs can share page tables, so
both operations can acquire the same pair of page-table locks.
UFFDIO_MOVE orders the locks by address, while mremap() takes the source
lock first. These conflicting orders can deadlock; mremap() holding
mmap_lock for writing no longer helps.
Move double_pt_lock() and double_pt_unlock() to mm/internal.h and use
them for all page-table moves in mremap(). Preserve the source entry
checks after acquiring both locks. Remove the comments claiming that
exclusive mmap_lock makes lock ordering irrelevant.
In move_ptes(), make sure to just recheck source and destination PMD
after taking the locks and drop the overly-long comment.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: use new helpers consistently; simplify description and comments;
move_ptes() fixup ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: reset the unstable trees of all nodes
Each full scan resets ksm_nr_node_ids unstable tree roots. Enabling
merge_across_nodes resets this count to 1, even if per-node roots were
previously allocated.
So when toggling "merge_across_nodes" 0 -> 1 -> 0, a scan that starts
while the setting is 1 and continues after switching back to 0 can
encounter stale unstable tree roots, resulting in UAF.
Only root is allowed to change "merge_across_nodes", and the documented
sequence is: "merge_across_nodes setting can be changed only when there
are no ksm shared pages in the system: set run 2 to unmerge pages first,
then to 1 after changing merge_across_nodes, to remerge according to the
new setting."
Let's fix it by tracking in ksm_nr_node_ids the actual number of
allocated tree roots.
remove_all_stable_nodes() and ksm_check_stable_tree() will now scan
more tree roots (skipping the empty ones), which is harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: fix use of a freed anon_vma at swap-in
A folio read from a swap slot previously shared by KSM can remain in the
swap cache after the process that first mapped it exits. Its anon_vma
can then be freed, so ksm_might_need_to_copy() must not dereference it
to compare roots.
Doing so can result in some false-positives, resulting in the reverse
mapping missing the new folio mapping, preventing migration and reclaim.
SLAB_TYPESAFE_BY_RCU allows individual anon_vma objects to be reused
immediately after freeing. A stale pointer can then refer to another
anon_vma whose root matches, even though the target VMA is not linked
to that anon_vma.
Move the anonymous rmap compatibility checks into
folio_anon_rmap_compatible(). Keep the page-index check and compare the
folio's anon_vma pointer against the VMA's own anon_vma and root first.
If neither matches, bite the bullet and walk the VMA's anon_vma_chain.
The VMA keeps these anon_vmas alive, and finding a match guarantees that
reverse mapping can find the new mapping.
Lorenzo Stoakes says in a private discussion:
"This isn't quite equivalent to the existing check.
Every anon_vma in an anon_vma_chain shares the same root, but if you
split a VMA then fork both of them like this:
VMA A
/ \ <split>
VMA B VMA C
\ /
root <- anon_vma 1
----^ ^---- <fork>
/ parent \
anon_vma 2 anon_vma 3
| |
VMA D VMA E
VMA's D and E both get their own new
anon_vma's such that:
VMA D: anon_vma 2 -> anon_vma 1 -> root
VMA E: anon_vma 3 -> anon_vma 1 -> root
And if you found a folio referencing anon_vma 2, the existing check:
anon_vma->root == vma->anon-vma->root
Would be true for VMA's B, C, D & E.
However after your change it'd be true for VMA D only, as it's the only
one with anon_vma 2 in its anon_vma_chain.
Whether or not that could actually happen in practice... 🙂 I don't
know.
[...] after your change it'd be true for VMA D only, as it's the only
one with anon_vma 2 in its anon_vma_chain. [...] I would [...] say that
you are making the test stricter but more correct.
"
If this affects performance when KSM was never even involved, we could
just track whether KSM ever merged anything and just skip these checks.
There isn't really a lot we can do otherwise: for mapped folios we might
be able to use folio_get_anon_vma(), but for unmapped folios there really
is no easy way to see if the anon_vma is still valid.
Document the (confusing) lifetime requirements of folio_anon_vma(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: check large swap-cache folios before mapping them
KSM folios are always small, but their shared swap slots can be read
back as part of a large folio in the swap cache. ksm_might_need_to_copy()
skips large folios, so another process can map a page with an incompatible
anon_vma or page index. Reverse mapping then cannot find the new
mapping, preventing migration or reclaim.
Apply the same compatibility checks to large folios as to small ones.
Pass the page corresponding to the swap entry and copy only that page
when necessary. In do_swap_page()'s copy path, decrement only that slot's
swap count, because the source swap-cache folio can now be large.
Fix generated by an LLM and sent by Chris Mason in private. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: call ->may_split() before a partial merge
A driver can use the ->may_split() hook to forbid a VMA boundary at
certain addresses.
A device-dax device is a character device that gives raw access to a
range of memory through mmap(). device-dax refuses any address that is not
a multiple of the device's alignment through vm_ops->may_split.
vma_merge_existing_range() can move boundaries, but does not call
vm_ops->may_split.
If a range at the edge of a VMA gets the attributes of the adjacent VMA,
the function moves only that range over to the neighbour: one VMA shrinks
and the other grows. This is a partial merge, and vma_modify() tries it
before any split.
Take a device-dax VMA that lies next to another VMA of the same file.
The user calls mprotect() on the one page of the first VMA that touches
the second VMA, and asks for the protection that the second VMA already
has. The result is a partial merge. It puts the boundary inside a 1 GiB
mapping, which is a single leaf entry at the PUD level.
As part of the merge, the kernel looks for a huge PMD to split at the
new boundary. That code does not expect a PUD leaf:
vma_merge_existing_range()
commit_merge()
vma_adjust_trans_huge()
split_huge_pmd_address()
mm_find_pmd()
treats the PUD leaf as a pointer to a PMD table,
so the "table" is the device memory that the leaf maps
__split_huge_pmd()
reads a PMD that the user wrote to the device memory
folio_put() on the folio that this PMD names
Bad. While the code must at some point be taught to split PUD entries as
well, the issue here is that we move VMA boundaries such that they are
incompatible with the driver.
Fix this by calling ->may_split() on the address that a partial merge
would move the boundary to, and by abandoning the merge if the driver
refuses. vma_modify() then tries the split, which fails with -EINVAL.
Factor out existing split handling into check_split() and reuse it.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: improve description; cleanup the code ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: split huge PUDs when adjusting VMA boundaries
PFN mappings such as VFIO PCI BAR mappings can use PUD leaves while
allowing VMA splits at page granularity. However, vma_adjust_trans_huge()
only handles PMDs.
After faulting a writable PUD-sized VFIO BAR mapping, changing its first
page to read-only with mprotect() makes the PMD walk treat the PUD leaf
as a PMD table. Applying MADV_DONTFORK to the first PMD-sized chunk leaves
the PUD spanning two VMAs: the PMD-aligned boundary skips splitting.
Walk the page tables once at each adjusted boundary and split a huge
PUD or PMD leaf as needed. Handle PUD leaves even when the boundary is
PMD-aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: don't leak the charge for stack growth
acct_stack_growth() charges stack expansion even without VM_ACCOUNT.
This can happen for read-only or MAP_NORESERVE mappings created with
MAP_GROWSDOWN. Unmapping these VMAs does not release the charge, leaking
Committed_AS.
Only check and charge growth for VM_ACCOUNT VMAs, matching mremap().
Unaccounted growth skips the overcommit check while remaining subject
to the other stack-growth limits. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/cma: don't release CMA pages still in use
When a driver calls dma_free_contiguous() before quiescing DMA, the
page might still have a reference from the device.
put_page_testzero() there returns false, WARN fires, but the code proceeds
to free_contig_frozen_range() putting a live page onto buddy and clearing
the bitmap. A subsequent allocation can hand the same PFN to a new
owner while the original holder still references it.
A concurrent put_page() that drops the last reference between the
testzero loop and free_contig_frozen_range() can double-queue the page
via page->lru, corrupting buddy lists.
Avoid the corruption by not freeing a CMA region if any of the
pages inside are still in use.
Make it explicit in the warning that the driver allowed a leak.
While at it, use page_ref_freeze() to make the semantics clearer and
switch to pr_warn_ratelimited().
[ david: use page_ref_freeze() + pr_warn_ratelimited() ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory-tiers: unregister empty tiers outside memory_tier_lock
When offlining a node's last memory empties its tier,
clear_node_memory_tier() calls device_unregister() while holding
memory_tier_lock. A concurrent sysfs read can hold a kernfs active
reference and block in nodelist_show() on that mutex. device_unregister()
then waits in kernfs_drain() for the read to finish and release its active
reference, while the reader waits for the offlining task to release the
mutex.
Return the node's former tier from clear_node_memory_tier(), making the
helper more similar to set_node_memory_tier(), which also returns a
memory_tier pointer. Let the caller unlink an empty tier under
memory_tier_lock before rebuilding demotion targets, then unregister its
device after dropping the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
khugepaged: fix readahead lock inversion in collapse_file()
collapse_file() can call page_cache_sync_readahead() while still holding
source folios locked. If truncate holds mapping->invalidate_lock
exclusively and waits for one of those folios, readahead waits for
invalidate_lock and neither side can make progress.
We need to release those folio locks before starting readahead. On a page
cache miss, roll back first, populate the collapse range, and retry once.
Doing readahead after rollback avoids an extra pass when all folios are
already present. If another miss occurs on retry, give up rather than keep
retrying while truncate or reclaim removes folios.
Keep page_cache_sync_readahead() and wait for read I/O with
filemap_lock_folio(), releasing each folio before moving to the next. The
existing uptodate check during collapse still handles read errors.
Shmem uses shmem_get_folio() for swapin and fallocated folios without
taking mapping->invalidate_lock, so it is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: check folio->mapping under folio lock in memfd_pin_folios()
memfd_pin_folios() pins folios from the page cache without taking the
folio lock. khugepaged or MADV_COLLAPSE can therefore replace a folio
after checking its refcount while memfd_pin_folios() still pins the old
folio. The caller then receives a folio which is no longer part of the
memfd.
For udmabuf and iommufd, this can cause data corruption: DMA accesses
the detached folio rather than the live memfd contents. DMA reads can
return stale data, while DMA writes update the detached copy and are
lost from the live memfd. The detached folio remains pinned, so these
accesses do not constitute a use-after-free or target another
application's memory. For memfd live update, the stale contents can
reappear in the memfd after handover.
Lock the folio and recheck folio->mapping before pinning it, like other
page cache users do. If the folio was removed, retry the folio lookup
from the index that was removed. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fail the mount if the casefold flag has changed
An unprivileged user in a user namespace can repeatedly trigger a kernel
warning with their own overlay mounts. They do so by changing the
casefold flag of the topmost layer's empty root, the top directory of
that layer, after the layers are set and before the mount is created.
The casefold flag of a directory makes name lookups in that directory
case-insensitive. All layers of an overlay must agree on casefolding.
ovl_mount_dir_check() reads the casefold flag of a layer root when
fsconfig() sets that layer, and saves the result in ofs->casefold. The
mount is created later, by another fsconfig() call with
FSCONFIG_CMD_CREATE.
The casefold flag of an empty directory can be changed.
The casefold flag of the overlay root must match ofs->casefold.
ovl_get_root() copies the flag from the topmost layer root, as it is
when the mount is created. On a mismatch, ovl_get_root() only does a
WARN_ON(), and the mount continues. The check is not a WARN_ON_ONCE(),
so each such mount warns again.
An unprivileged user needs CONFIG_UNICODE, and a tmpfs mounted with the
casefold option in their namespace.
Reproduced by changing the casefold flag of the empty upper directory
after the layers were set and before FSCONFIG_CMD_CREATE, with tmpfs and
ext4 layers, and as uid 1000 in a user namespace.
Fix this by replacing the WARN_ON() with a check that fails the mount
with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: do not let chattr change the casefold flag
chattr +F or -F on an overlay directory can make the directory, or the
whole mount, unusable. Lookups of the directory, and lookups in it, then
fail. From code inspection, the caller only needs to own the directory.
The upper filesystem must support casefolding: ext4 or f2fs with the
casefold feature, or tmpfs with the casefold option.
chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a
directory. The flag enables casefolding (case-insensitive name lookup)
for the directory. All directories of an overlay must match the casefold
state that was recorded at mount time, and ovl_lookup_single() enforces
this:
- A lookup in a directory that does not match fails with -ESTALE.
- A lookup of the directory itself fails with -EREMOTE.
ovl_fileattr_set() copies the directory up, which creates it in the
upper layer if it only existed in a lower layer. It then passes
FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts
the change if the upper directory is empty, regardless of what the
merged directory contains. The merged directory is the one that the user
sees, with the names from the upper and the lower directories.
After the change the upper directory no longer matches the mount. If the
directory is the root of the overlay, the whole mount is affected.
The flag can also change without chattr +F or -F. chattr reads all flags
of a directory, changes one and writes all of them back. For a directory
that only exists in a lower layer, overlayfs reads the flags from the
lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL
on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs
compares with the mount. So its directories count as not casefolded.
With a lower layer on such an xfs and an upper layer on ext4 with the
casefold feature, chattr +A on a lower-only directory therefore sets
FS_CASEFOLD_FL on the new, empty upper directory.
Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an
overlay directory whose upper directory was empty. Afterwards lookups
below it failed with ESTALE, and lookups of the directory itself failed
with EREMOTE. The chattr +A case was seen once, on a kernel with an
earlier form of this patch that still passed the caller's flag on:
lookups of the directory failed with EREMOTE.
Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that
can change the flag, asks for a casefold flag on a directory that does
not agree with the casefold state of the mount. This also refuses the
chattr +A case above.
[amir: check the flag against the casefold state of the mount instead of
reading back the flags] |