| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in CRTC reset function
amdgpu_dm_crtc_reset_state() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - fix rng list on registration error
hwrng_register(rng) does the following:
1. Checks if rng has name and read methods set
2. Checks if the name already exists
3. Adds rng to global rng_list
4. May try to set rng to current_rng
If step 4 fails, it returns an error. However, it does not remove the
rng from rng_list, causing a dangling reference which can result in
use-after-free if the caller frees rng, since registration failed.
Add a list_del_init() cleanup step. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered buffer attaches the bvec pages this way via
io_sg_from_iter(). The rest of the stack honours this invariant:
skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS
is set, and skb_zcopy_managed() is the guard used at the other unref
sites.
esp_ssg_unref() is missing that guard, so for a managed-frag skb it
drops a page reference the skb never acquired. This can underflow the
page reference count and free a page that is still in use.
Guard the function with skb_zcopy_managed() so both unref paths are
skipped for managed-frag skbs, matching skb_release_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rvt: Return NULL after port allocation failure
rvt_alloc_device() deallocates the IB device when its port array cannot
be allocated but then returns the pointer to the released allocation.
Callers treat any non-NULL value as valid and dereference it, resulting
in a use-after-free.
Return NULL immediately after deallocation so callers can propagate the
allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that
need the structure to remain valid across a sleep (while waiting on acquiring
rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with
rdtgroup_kn_put().
The release path is intended to serve as the fallback freer: if the count
drops to zero and the group has already been marked RDT_DELETED,
rdtgroup_kn_put() frees the structure.
The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting
from a resctrl directory remove or resctrl fs unmount act as the primary
freer: they hold rdtgroup_mutex and free each rdtgroup whose waitcount is
zero, otherwise they set RDT_DELETED and leave the freeing to the last waiter.
These two freers race. rdtgroup_kn_put() commits waitcount == 0 with
atomic_dec_and_test() outside rdtgroup_mutex, then reads rdtgroup::flags.
Between those two operations a concurrent caller of free_all_child_rdtgrp()
or rmdir_all_sub() (which holds the mutex) can observe waitcount == 0 via
atomic_read(), call rdtgroup_remove(), and kfree() the structure.
The subsequent read of rdtgroup::flags in rdtgroup_kn_put() is then
a use-after-free, and the structure may even be freed twice if the freed
memory happens to satisfy the RDT_DELETED flag check.
Replace the bare atomic_dec_and_test() with atomic_dec_and_mutex_lock() so
that the decrement-to-zero takes rdtgroup_mutex before the count becomes
globally visible. The inspection of rdtgroup::flags then runs under the same
mutex held by the bulk freers, making the two paths mutually exclusive.
The common case where the count does not reach zero remains lock-free. Defer
kernfs_unbreak_active_protection() until after the mutex is dropped since
kernfs active protections functionally wrap rdtgroup_mutex. Remove resource
group, which in turn drops its kernfs reference, after kernfs protection is
restored.
[ bp: Split the commit messsages into smaller, easier-parseable paragraphs. ] |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix SCMI device destroy lifetimes
scmi_child_dev_find() drops the reference returned by
device_find_child() before returning the scmi_device pointer. A
concurrent unregister can then release the device while the destroy path
is still using the returned pointer.
Make the lookup helper return the device_find_child() reference and keep
it until scmi_device_destroy() has finished unregistering the child.
Also split device_unregister() in __scmi_device_destroy() so the SCMI bus
ID is not made reusable until after device_del() has removed the old
scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the
same ID while the old device is still registered.
The final device release callback is also a possible cleanup path when
SCMI children are deleted by driver core recursion rather than
__scmi_device_destroy(). Release the SCMI bus ID from a common helper
used by destroy, register-failure and final-release paths, and clear
scmi_dev->id after freeing it so the final release cannot free the same
ID again. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Patchwork: https://patchwork.freedesktop.org/patch/738905/ |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
The gpio_chip is allocated with device-managed memory but registered with
the non-managed gpiochip_add_data(). This was harmless while the drivers
were built-in, but once they can be built as modules and unbound/rmmod'd,
devm frees the gpio_chip's memory while it is still registered, causing a
use-after-free.
Register it with devm_gpiochip_add_data() so it shares the same
device-managed lifecycle, which also lets the manual gpiochip_remove()
error paths go away. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: oc-tiny: switch to managed controller allocation
The controller is allocated with the non-managed spi_alloc_host() while
the interrupt is registered with devm_request_irq(). During removal,
spi_bitbang_stop() only unregisters the controller; the subsequent
spi_controller_put() then frees the controller together with its
embedded driver-private devdata, which is the IRQ handler's dev_id. The
devm_request_irq() release action (free_irq()), which drains the
handler, does not run until after .remove() returns. A late or latched
interrupt can therefore reach tiny_spi_irq() and dereference
already-freed memory (e.g. hw->base).
Switch to devm_spi_alloc_host() so that the devres LIFO order releases
the controller only after free_irq() has drained the handler, and drop
the now-redundant spi_controller_put() from .remove(). The probe error
path is simplified to direct returns.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()
__tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger
tegra241_cmdqv, which frees the original @smmu once it relocates. A failure
after that returned NULL, and the caller then dereferenced the freed @smmu
on its fallback path.
Return an int and take @smmu by reference instead, then update *smmu to the
reallocated pointer after devm_krealloc() succeeds, so the caller and its
fallback path both use the live @smmu rather than the freed original. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when dynids.lock is held,
as remove_id_store() can free the node. Thus, make a copy in
pci_match_device(). Also, clarify that the id parameter is only valid
during probe. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry()
When the device is in the fatal error state, write_tpt_entry() returns -EIO
before handing the caller's preallocated skb to the transmit path; its
allocation-failure returns do the same. c4iw_dereg_mr() ignores the error
and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the
skb a second time after dereg_mem() already consumed it, a double free.
Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on
every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and
stag allocation failure. c4iw_ofld_send() consumes the skb on success and
error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after
dereg_mem(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unwind state on add_interface failure
When mt76_wcid_alloc() fails, mt7915_add_interface() returned without
clearing the vif_mask/omac_mask bits it had already set, without removing
the firmware dev info added earlier, and without clearing a monitor_vif
pointer to the vif mac80211 is about to free. mac80211 does not call
remove_interface() for a failed add, so the indices and firmware dev
entry leaked permanently and testmode could dereference the stale
monitor_vif. Add a proper error unwind. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: cancel reset and rc work on device unregister
Both drivers cancelled dump_work on unregister but left reset_work and
rc_work to be flushed only by destroy_workqueue() in mt76_free_device(),
which runs after the hw is unregistered and the hardware stopped. A
reset_work that fires in that window calls ieee80211_restart_hw() and
re-arms mac_work on an unregistered hw, and rc_work touches station state
being torn down. Cancel both up front, alongside dump_work. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: don't tear down KMS twice when KMS init fails
When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway
through, both display drivers already tear their KMS state down via
mdp4_destroy() / mdp5_kms_destroy() before returning the error. The
common error path in msm_drm_init() then runs msm_drm_uninit() ->
msm_drm_kms_uninit(), which tries to destroy the very same KMS a second
time, which causes a use-after-free crash.
Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't
perform error cleanup on the failure. Let the common path own the
cleanup, instead of freeing the KMS from their error paths.
The crash trace for the reference:
__lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863)
lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1))
touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136)
__flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33))
msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93)
msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184)
msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227)
try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748)
__component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739)
dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383)
mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247)
Patchwork: https://patchwork.freedesktop.org/patch/742068/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: stop PMSR before P2P and NAN teardown
PMSR request teardown must abort active measurements while the
wireless_dev is still present in the driver. cfg80211_leave_locked() and
cfg80211_stop_pd() already do this before invoking the driver's stop
callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not.
Those helpers are also called directly by nl80211, rfkill shutdown, and
wireless_dev unregister paths. If one of these paths stops a P2P device
or NAN interface with a pending request, it removes the mac80211
subinterface from the driver first. Subsequent request cleanup cannot
reach the lower driver's abort callback, but cfg80211 frees the request
regardless. Driver state can then retain a stale request and use it when
it later reports a result.
Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN
interface. This keeps lower-driver request state and cfg80211 request
ownership in sync for all of the helpers' callers. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: do fallible allocations before the console can be registered
serial_core_add_one_port() allocates uport->tty_groups after
uart_configure_port(), which may register the console. If the allocation
fails, the driver unwinds the port while its console remains registered.
The earlier uport->name allocation has a related failure path that leaves
state->uart_port linked to a port being freed.
Failslab reproduced a NULL dereference in PL011 console output and a KASAN
use-after-free in i.MX console output after failed binds.
Allocate the name and tty_groups before linking the port and configuring
it. Reserve space for the optional driver attribute group because
config_port() may populate uport->attr_group during configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: clear freed pointers on uart_register_driver() failure
uart_register_driver() leaves drv->state pointing to freed memory when
tty_alloc_driver() fails. If tty_register_driver() fails, drv->tty_driver
also retains a pointer after its reference is dropped.
Drivers that use drv->state as an "already registered" flag can then skip
registration on the next probe and pass the freed state to
uart_add_one_port().
This issue was found with failslab on QEMU's raspi1ap board by
failing registration and binding the PL011 port again.
Clear both pointers on their failure paths, as uart_unregister_driver()
already does. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix race between policy activation and blkg destruction
When switching an IO scheduler on a block device, blkcg_activate_policy()
allocates blkg_policy_data (pd) for all blkgs attached to the queue.
However, blkcg_activate_policy() may race with concurrent blkcg deletion,
leading to use-after-free and memory leak issues.
The use-after-free occurs in the following race:
T1 (blkcg_activate_policy):
- Successfully allocates pd for blkg1 (loop0->queue, blkcgA)
- Fails to allocate pd for blkg2 (loop0->queue, blkcgB)
- Enters the enomem rollback path to release blkg1 resources
T2 (blkcg deletion):
- blkcgA is deleted concurrently
- blkg1 is freed via blkg_free_workfn()
- blkg1->pd is freed
T1 (continued):
- Rollback path accesses blkg1->pd->online after pd is freed
- Triggers use-after-free
In addition, blkg_free_workfn() frees pd before removing the blkg from
q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd
for a blkg that is being destroyed, leaving the newly allocated pd
unreachable when the blkg is finally freed.
Fix these races by extending blkcg_mutex coverage to serialize
blkcg_activate_policy() rollback and blkg destruction, ensuring pd
lifecycle is synchronized with blkg list visibility. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline xattrs during inode block validation
Patch series "ocfs2: validate xattr entry bounds", v7.
This series validates OCFS2 xattr entry name/value bounds when xattr
metadata is read and validated, before getxattr() or listxattr() can walk
out-of-range entry arrays or offsets from corrupted metadata.
This patch (of 2):
ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk
metadata from it, but inline xattr metadata is still checked only in
operation-specific consumers. The existing ibody lookup helper validates
inline header placement and entry count, but inode block validation does
not reject entry name/value bounds.
Add a flat xattr entry validator and call it from inode block validation
for inline xattrs. Keep the operation paths on their existing
header/count lookup checks; the full entry bounds check now runs when the
inode block is validated at read time.
Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or
listxattr() can walk past the inline storage.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170
Read of size 2 at addr ffff8881242a2000 by task python3/529
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_find_entry+0x5a/0x170
ocfs2_xattr_get_nolock+0x20a/0x820
ocfs2_xattr_get+0x10c/0x1e0
__vfs_getxattr+0xe2/0x130
vfs_getxattr+0x185/0x1b0 |
