| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: remove stale channels from all sessions on teardown
ksmbd_sessions_deregister() removes a connection's channels from other
sessions' channel lists only while conn->binding is still set:
if (conn->binding) {
hash_for_each_safe(sessions_table, ...)
ksmbd_chann_del(conn, sess);
}
conn->binding is a transient flag: it is cleared once a binding
SESSION_SETUP completes, and also by a subsequent non-binding
SESSION_SETUP on the same connection (a reauthentication on a bound
channel, or a new SessionId==0 setup). A connection that has bound a
channel into another session's ksmbd_chann_list and then clears
conn->binding leaves that channel behind when it disconnects: the
channel, whose chann->conn points at the now freed struct ksmbd_conn,
stays on the owner session's list.
When the owning connection later tears down, the second loop
dereferences the stale channel:
xa_for_each(&sess->ksmbd_chann_list, chann_id, chann)
if (chann->conn != conn)
ksmbd_conn_set_exiting(chann->conn); /* freed */
which is a use-after-free write into the freed ksmbd_conn (the same
stale channel is also walked by show_proc_session() through /proc). The
session is leaked as well, because its channel list never empties.
Remove the conn->binding gate so a connection always removes its
channels from every session on teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
host1x: bus: Fix missing ops null check in error teardown
In host1x_device_init(), the error teardown paths do not check
client->ops before dereferencing it, unlike the forward init paths
which correctly guard with 'client->ops &&'. This can result in a
NULL pointer dereference if client->ops is NULL.
Fix by adding the missing client->ops check in both the teardown
and teardown_late labels. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has
no MSI controller device tree node and GICv4, it results a panic as
“gic_domain” is NULL and the kernel attempts to access it.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
Mem abort info:
ESR = 0x0000000096000006
CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __irq_domain_instantiate+0x1d4/0x578
lr : __irq_domain_instantiate+0x1cc/0x578
Set vLPI support to false at init time if the host has no ITS, so it
propagates properly to kvm_vgic_global_state.has_gicv4. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v5: Immediately exec priority drop following activate
With GICv5 an interrupt of equal or lower priority cannot be signalled
until there has been a priority drop. This is done via the GIC CDEOI
system instruction. Once this has been executed, the hardware is able
to signal the next interrupt if there is one.
As all interrupts are programmed to have the same priority, no new
interrupts can be signalled until the priority drop has happened. This
can cause issues when, for example, an interrupt remains active while
a long running process takes place, such as when injecting a physical
interrupt into a guest VM in software.
The GICv5 driver has so far done the priority drop as part of
irq_eoi(), i.e., at the same time as deactivating the interrupt. This
means that any long running process (or VM) could block incoming
interrupts, effectively causing a denial of service for all other
interrupts.
Rather than doing the EOI as part of irq_eoi() (which the name would
suggest would be a good place for it), move it to happen immediately
after acknowledging an interrupt in the main GICv5 interrupt
handler. The deactivation of interrupts (GIC CDDI) remains implemented
as part of irq_eoi(), which means that the same interrupt cannot be
signalled a second time until deactivated by software. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: handle set_blocksize failures
ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Add range checks for dec_output_info
If the driver's dec_output_info contains invalid data the driver can
write in invalid memory. Add a range check for that.
This fixes this smatch error:
drivers/media/platform/chips-media/wave5/wave5-vpuapi.c:588 wave5_vpu_dec_get_output_info() error: buffer overflow 'inst->frame_buf' 64 <= 127 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't enable large folios on encrypted inodes
Commit 709f0f1f1bf5 ("ext4: add checks for large folio
incompatibilities when BS > PS") disables large folios at mount time
if the "encrypt" feature is set. However, enabling that feature on a
mounted filesystem circumvents that check, and writing encrypted data
results in a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000028
Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work
RIP: 0010:ext4_finish_bio+0xf7/0x3e0
Call Trace:
ext4_release_io_end+0x51/0x110
ext4_end_io_end+0x4c/0xe0
ext4_end_io_rsv_work+0xb3/0x100
Fix this by disabling large folios on encrypted inodes, as is
already done for inodes that use data journaling.
This affects all kernels between v6.19 and v7.2, but it is not needed
in v7.3, where the code was significantly refactored. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Build the cid tables privately and publish them with RCU
The cid tables are visible to the cid kfuncs while being modified: the
first enable publishes the global pointers before filling them,
ops.init_cids() overrides rewrite them in place, and re-enables rebuild
them in place. A racing TRACING or SYSCALL program can read unfilled
entries, including uninitialized memory in the kmalloc'd tables, or torn
topo updates.
Tie the tables' lifetimes to the root sched instead: each root enable
builds a fresh set privately and publishes the per-table __rcu globals once
the layout is final, and root disable unpublishes and RCU-frees the set. A
non-NULL global is now always a fully built table which stays valid for the
reader's RCU read section, and lookups stay two loads. Kfuncs treat NULL as
no-mapping, also after the scheduler exits instead of reporting the stale
last mapping.
The cid kfuncs are available whether the root scheduler is cid-form or
cpu-form, the latter to allow gradual migration to cids. Every root
therefore builds and publishes a default mapping.
Every reader must either be gated on scheduler liveness or NULL-check
inside an RCU read section. Fix the two kfuncs that were neither:
scx_bpf_this_cid() read the table with no RCU or preemption protection and
scx_bpf_task_cid() relied on KF_RCU, which doesn't put a sleepable program
in an RCU read section. The hotplug callbacks are instead serialized by
retiring the tables inside the cpus_read_lock() section that clears
scx_root.
v2: Document why every root builds the tables (desc + cid.c comment). |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_flower: Fix port range register leak in tmplt_create()
mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template
into a stack-local struct mlxsw_sp_acl_rule_info purely to compute
rulei.values.elusage. Parsing can acquire port range registers via
mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes
through mlxsw_sp_acl_rulei_destroy(), those registers were never
released, including through chain template deletion.
Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually
release the necessary resources and call from
mlxsw_sp_flower_tmplt_create() to plug the leak.
The issue was found during a review of Wentao Liang's patch referenced
below. |
| The Ultimate Multisite WordPress plugin before 2.17.2 does not validate a user-supplied value used to select a file to include, allowing unauthenticated attackers to include and read arbitrary local files, including the WordPress configuration file. |
| A flaw was found in the clevis PKCS#11 pin. The clevis-decrypt-pkcs11 script passes the PKCS#11 token PIN as a command-line argument to pkcs11-tool, making it visible to any local user through process listing or the /proc filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: remove stale rcu_barrier() in br_multicast_dev_del()
This rcu_barrier() came from a time call_rcu() calls were used in
net/bridge/br_multicast.c.
Now kfree_rcu() is there, we can remove this problematic rcu_barrier()
which causes extreme RTNL pressure in many syzbot reports.
INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537.
task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337
Workqueue: netns cleanup_net
Call Trace:
<TASK>
[<ffffffff81914eaa>] context_switch+0xf2a/0x1730 kernel/sched/core.c:6483
[<ffffffff81201143>] __schedule+0x1133/0x43a0 kernel/sched/core.c:8411
[<ffffffff8120446b>] __schedule_loop kernel/sched/core.c:8514 [inline]
[<ffffffff8120446b>] schedule+0xab/0x260 kernel/sched/core.c:8529
[<ffffffff8121a093>] schedule_timeout+0xc3/0x2b0 kernel/time/sleep_timeout.c:75
[<ffffffff81205347>] do_wait_for_common kernel/sched/completion.c:100 [inline]
[<ffffffff81205347>] __wait_for_common kernel/sched/completion.c:121 [inline]
[<ffffffff81205347>] wait_for_common kernel/sched/completion.c:132 [inline]
[<ffffffff81205347>] wait_for_completion+0x2c7/0x5d0 kernel/sched/completion.c:153
[<ffffffff81b8f27f>] rcu_barrier+0x49f/0x620 kernel/rcu/tree.c:3888
[<ffffffff860091b3>] br_multicast_dev_del+0x303/0x350 net/bridge/br_multicast.c:4459
[<ffffffff85fb5dbc>] br_dev_uninit+0x1c/0x40 net/bridge/br_device.c:157
[<ffffffff8568058c>] unregister_netdevice_many_notify+0x1c1c/0x2300 net/core/dev.c:12599
[<ffffffff8562be43>] ops_exit_rtnl_list net/core/net_namespace.c:187 [inline]
[<ffffffff8562be43>] ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:248 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_port: recognize UPIO_AU
My MIPS Alchemy systems generate the following warning during
probe of the 8250 driver:
WARNING: drivers/tty/serial/8250/8250_port.c:462 at set_io_from_upio+0xfc/0x124, CPU#0: swapper/0/1
Unsupported UART type 4
[...]
[<80521d40>] set_io_from_upio+0xfc/0x124
[<80521dfc>] serial8250_set_defaults+0x94/0xe0
[<80520fb4>] serial8250_register_8250_port+0x288/0x51c
[<805214ec>] serial8250_probe+0x160/0x1e8
[<8053b5f0>] platform_probe+0x64/0x90
The least invasive fix is to recognize UPIO_AU (type 4) in set_io_from_upio()
and do nothing, since all parameters have already been set up in
8250_rt288x.c::au_platform_setup().
Run-tested on Alchemy Au1300 platform. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Add validation for host-provided max_segs
The max_segs field is of type unsigned short, and if a host driver
sets an excessively large value, it may be truncated to zero. This
can cause mmc_alloc_sg() to call kmalloc_objs() with a zero size
allocation request, which leads to undefined behavior.
Under the SLUB allocator, kmalloc(0) returns a special pointer
(ZERO_SIZE_PTR). The subsequent 'if (sg)' check will evaluate to
true, and sg_init_table() will then attempt to access invalid memory,
resulting in a crash:
dwmmc_rockchip 2a310000.mmc: Successfully tuned phase to 133
mmc1: new UHS-I speed SDR104 SDHC card at address aaaa
Unable to handle kernel paging request at virtual address 0000001ffffffff0
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000102c88000
[0000001ffffffff0] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 2 UID: 0 PID: 102 Comm: kworker/2:1 Not tainted 7.0.0-rc6-next-20260331-00013-g4d93c25963c5-dirty #80 PREEMPT
Hardware name: Rockchip RK3576 EVB V10 Board (DT)
Workqueue: events_freezable mmc_rescan
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sg_init_table+0x2c/0x50
lr : sg_init_table+0x24/0x50
sp : ffff8000837db710
x29: ffff8000837db710 x28: 000000000000c000 x27: 0000000000000300
x26: 0000000000000000 x25: 0000000000000040 x24: ffff0000c46a0000
x23: 0000000000000000 x22: ffff0000c0c73c00 x21: 0000000000000010
x20: 0000000000000010 x19: 0000000000000000 x18: 000000000000002c
x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000
x14: 0000000000000400 x13: ffff8000837dc000 x12: 0000000000000000
x11: ffff0000c0c73ca0 x10: 0000000000000040 x9 : 459ec1f0abbdbb00
x8 : 0000001fffffffe0 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000035579 x4 : 0000000000000901 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000010
Call trace:
sg_init_table+0x2c/0x50 (P)
mmc_mq_init_request+0x64/0x90
blk_mq_alloc_map_and_rqs+0x3ac/0x480
blk_mq_alloc_set_map_and_rqs+0x98/0x1e0
blk_mq_alloc_tag_set+0x1c0/0x290
mmc_init_queue+0x120/0x370
mmc_blk_alloc_req+0x150/0x420
To prevent this, add a validation check in mmc_mq_init_request() to
detect when sg_len (derived from max_segs) is zero. If sg_len is zero,
we return an error and print an error message, allowing host driver
developers to identify and fix incorrect max_segs configuration.
This is a defensive measure that ensures the MMC core fails gracefully
when host drivers provide invalid max_segs values, rather than crashing
with a page fault. |
| A Null pointer dereference problem was found in ida_free in lib/idr.c in the Linux Kernel. This issue may allow an attacker using this library to cause a denial of service problem due to a missing check at a function return. |
| A local privilege escalation vulnerability in the optional dnscache package of Zimbra Collaboration Suite (ZCS) allows the Unix zimbra account to access files with root privileges. The passwordless sudo policy permits arbitrary arguments to zmunbound, whose wrapper forwards them to Unbound without restricting the configuration path. An attacker can supply a configuration that retains root privileges and disables the chroot. Include directives expose root-readable file contents through parser errors, while an attacker-selected logfile path creates a root-owned file or appends Unbound log records to an existing file. This can disclose password hashes and private keys and corrupt privileged configuration files, preventing affected services from starting with the modified configuration. The affected configuration is present in ZCS 10.1.16 and 10.1.21 dnscache packages. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.08 to before version 26.05, the IIIF Auth 2.0 endpoints auth/login and auth/token in AuthorizationFlowResource accept an origin query parameter without validation and then (1) embed it into the Content-Security-Policy: frame-ancestors response header and (2) embed it into an HTML response body as a JavaScript single-quoted postMessage argument. Because the attacker controls both the login and token calls that initiate the flow, the unescaped value yields reflected XSS. This issue has been patched in version 26.05. |
| Networknt light-4j from 2.1.5 before 2.4.0 contains an authentication bypass vulnerability in BasicAuthHandler that allows unauthenticated attackers to log in as LDAP/AD-delegated users. Attackers can send a Basic Authorization header with a known username and empty password, triggering an unauthenticated LDAP bind that is accepted as successful authentication. |
| Fat Free CRM before 0.26.0 contains an insecure direct object reference vulnerability that allows authenticated users to modify or delete other users' comments because CommentsController#update and #destroy use an unscoped Comment.find without authorization checks. Attackers can send PUT or DELETE requests to /comments/:id with enumerable sequential IDs to edit or delete comments on contacts, accounts, leads, and opportunities owned by others. |
