| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix gem reference leak in validate_init()
On the ttm_bo_reserve() failure and "vma not found" error paths, the
loop breaks without adding the looked-up object to any validate list,
so the reference taken by drm_gem_object_lookup() is never released;
validate_fini() only walks the spliced lists. Drop the reference
before breaking out on both paths. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: fix kernel stack leak to user-space in error path
If we fail to acquire the GPIO chip guard in gpio_desc_to_lineinfo(), we
return immediately before zeroing the info struct we'll end up passing
to the user-space later in lineinfo_get_v1(). This may leak the kernel
stack contents. Make gpio_desc_to_lineinfo() return int so that the
-ENODEV returned on failure to acquire the guard can be propagated to
the callers.
While not strictly necessary: move the memset() before trying to acquire
the SRCU read lock too for good measure. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: arizona: Fix runtime PM leak in arizona_gpio_direction_out()
Switching a persistent GPIO line from input to output acquires a
runtime PM reference on the parent device, but if the subsequent
regmap_update_bits() fails the reference is never dropped and no later
direction_in() can balance it since the direction was never changed.
Drop the reference on the update failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: release unused CIS holds after channel attach
hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the
ISO layer. A new channel association consumes that hold, which is
eventually released by iso_conn_free().
There are two cases where iso_chan_add() does not create an association:
it returns success when the socket is already attached to the same
iso_conn, and it returns -EBUSY when another socket is attached. The
hold returned for the current call is unused in both cases. This occurs
when deferred setup calls iso_connect_cis() again for its existing
socket, or when another socket attempts to reuse the CIS.
Detect the idempotent case while the connection is locked and release
the unused hold after iso_chan_add(). Also release it on -EBUSY. Do not
drop it for other errors: a newly allocated iso_conn releases the
transferred hold when its last temporary reference is put. |
| Pillow is a Python imaging library. From 9.1.0 until 13.0.0, Pillow can disclose uninitialized stack memory when Image.quantize() uses an empty palette. ImagingPaletteCacheUpdate() leaves a local cache array uninitialized when the palette has zero entries, and the conversion path emits those bytes as output pixel indices. An attacker who controls the palette image can obtain stack contents from a returned PNG or GIF. This can disclose addresses and stack-canary data without an out-of-bounds access, memory corruption, or process crash. This issue is fixed in version 13.0.0. |
| WeGIA is a web manager for charitable institutions. Prior to 3.8.6, the pre-installation web/instalador/instalador.php endpoint is reachable before config.php exists and processes unauthenticated installation POST data. In the Linux reinstall flow, a crafted usuario value reaches a command executed by shell_exec(). The installer also writes attacker-controlled values into executable config.php and concatenates the database name nomebd into a CREATE DATABASE statement. Successful exploitation can execute commands as the web-server user, persist attacker-controlled PHP configuration, and alter or disrupt the application and its data. This issue is fixed in version 3.8.6. |
| Wheels CLI through 4.1.0 does not verify that the local development server answering its HTTP requests belongs to the current project. A process listening on a port targeted by the CLI can receive the project's reload password and code submitted through wheels reload or wheels console; console also probes common ports when the project server is down. Other commands can perform unintended state-changing operations against a different local application's server and database. Exploitation requires a process listening on a targeted local port and the developer running an affected command. This is fixed in 4.1.1, including changes to the CLI and application template. |
| KEDA is a Kubernetes-based Event Driven Autoscaling component. In version 2.20.2 and earlier, a namespace administrator who can create TriggerAuthentication and ScaledObject resources can set hashiCorpVault.address to a tenant-controlled endpoint and select Kubernetes authentication without an explicit credential. KEDA then uses the operator pod's projected ServiceAccount token and sends it to that endpoint as a Vault login credential. The JWT-shape filter from the prior CVE-2025-68476 remediation accepts the operator token because its subject is a Kubernetes ServiceAccount, so the attacker can obtain the operator's cluster-wide permissions, including broad Secret reads and workload or admission-related operations. This vulnerability is fixed in 2.21.0. |
| Portkey AI Gateway 1.14.0 through 1.15.2 contains a server-side request forgery vulnerability that allows unauthenticated attackers to reach loopback and Docker host services because isValidCustomHost trusts localhost-style hosts when TRUSTED_CUSTOM_HOSTS is unset. Attackers can send /v1 requests with a crafted x-portkey-custom-host header, such as via the ollama provider, to make the gateway call internal services and return their responses. |
| InvoiceShelf is an open-source web & mobile app that helps track expenses, payments and create professional invoices and estimates. Prior to version 2.4.0, InvoiceShelf's PDFConfigurationRequest.php validates the owner-controlled gotenberg_host setting only as a syntactically valid URL. GotenbergPDFDriver::loadView later sends a multipart HTTP request containing rendered invoice, estimate, or payment HTML as document.html to that host without rejecting private, loopback, link-local, or reserved addresses. An owner can use PDF generation to reach internal services or cloud metadata endpoints, and a configured external host receives customer names, addresses, line items, totals, and company identifiers from subsequent PDF renders. This issue is fixed in version 2.4.0. |
| The software accepts user-supplied data without sufficient validation, allowing for the injection of malicious Expression Language (EL) code. This can lead to the execution of arbitrary operations within the affected deployment.
Exploitation of this vulnerability requires administrator privileges. The impact is minimal as EL usage is restricted to certain read operations. |
| The IPv6 UDP send path for unconnected sockets did not apply the jail policy of rewriting a loopback destination address to the jail's primary IPv6 address.
A process in a classic (non-VNET) jail can send UDP datagrams to services listening on the host's IPv6 loopback address, bypassing jail network isolation. |
| Brian Mariani from DigitalCanion SA has discovered a vulnerability in the domain creation functionality of koozali's
SME Server version 11.0rc1-215, allowing an attacker with high privileges
to inject reserved Apache configuration directives, corrupting
httpd.conf and preventing Apache from starting after a server reboot,
resulting in a denial-of-service (DoS) condition affecting the web
server and its hosted virtual hosts. |
| Server-Side request forgery (SSRF) vulnerability in Apache Kylin. Impact most to the kylin job service that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| A code execution flaw was found in Emacs, affecting versions prior to 31.2. The Flymake mode using language backends other than Lisp would execute arbitrary code from the edited file while performing syntax checking. Viewing or editing untrusted files using Emacs could lead to arbitrary code execution with the privileges of the user running Emacs. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: avoid leaking the caller's thread keyring via the table device file
The refactoring in commit a28d893eb327 ("md: port block device access to file")
accidentally causes the caller's thread keyring to be kept alive long
beyond the caller's lifetime.
As a result, "cryptsetup luksSuspend" silently fails to wipe the
LUKS volume key from memory.
In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread
keyring to pass the volume key to the kernel. dm-crypt's
crypt_set_keyring_key() copies the key material into its own
crypt_config structure and then drops its own reference to the key in
the keyring with key_put().
With this fix, restoring pre-v6.9 behavior, the copy in the thread
keyring is then promptly garbage collected, such that exactly one copy
of the volume key remains. This single copy is correctly wiped from
memory on "cryptsetup luksSuspend".
Without this fix, the thread keyring and the volume key in it remains.
This second copy is only freed on "luksClose". "luksSuspend" neither
knows about this copy nor has any way to remove it, so the key remains
recoverable from RAM after a suspend that is documented to have wiped it.
This fix should not introduce new security problems, as the code is
anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling
task, is the legitimate owner of this long-lived file. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free unsubmitted command instead of double-putting it
scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend
whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0;
the se_cmd is initialised (kref_init() via target_init_cmd()) only
later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB
path. The two error paths in scsiback_do_cmd_fn() taken before the
command is submitted -- a failed scsiback_gnttab_data_map() and an
unknown ring_req.act -- call
transport_generic_free_cmd(&pending_req->se_cmd, 0), which kref_put()s a
refcount of 0. That underflows it ("refcount_t: underflow;
use-after-free") and, as the release function is not run, leaks the
command tag.
Impact: a pvSCSI guest can leak every command tag of a LUN's session,
stopping the LUN, by submitting requests with a bad grant reference or
an unknown request type; under panic_on_warn the refcount underflow
panics the host.
Add a helper that just returns the tag with target_free_tag() and sends
the error response. It frees the tag while the v2p reference still pins
the session, and snapshots the response fields beforehand because
freeing the tag can let another ring reuse the pending_req slot. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in
ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn
object with kmem_cache_alloc(). The function then initializes many
fields explicitly, but only resets in_seq.delta and out_seq.delta in the
two struct ip_vs_seq members.
That leaves init_seq and previous_delta uninitialized. This is normally
harmless while the corresponding IP_VS_CONN_F_IN_SEQ or
IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync
message, however, ip_vs_proc_conn() preserves those flags from
IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits
IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with
SEQ flags set but with the rest of in_seq/out_seq still containing stale
slab data.
When a packet for such a connection is later handled by an IPVS
application helper, vs_fix_seq() and vs_fix_ack_seq() use
previous_delta and init_seq to rewrite TCP sequence numbers. A malformed
sync message can therefore make forwarded packets carry stale slab bytes
in their TCP seq/ack numbers, and can also corrupt the forwarded TCP
flow.
Reset both struct ip_vs_seq members completely before publishing the
connection. This matches the existing "reset struct ip_vs_seq" comment
and keeps the sequence-adjustment gates inactive unless valid sequence
data is installed later. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00: avoid full teardown before work setup in probe
rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for
all probe failures. However, drv_data allocation and workqueue allocation
can fail before intf_work, autowakeup_work and sleep_work have been
initialized.
Do not enter the full remove path until the probe has reached the point
where those work items are set up. Return directly for drv_data allocation
failure, and use a small early cleanup path for workqueue allocation
failure.
This issue was found by our static analysis tool and then confirmed by
manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The
early probe exits should not call a common teardown path that assumes the
later work setup has already completed.
A QEMU PoC forced alloc_ordered_workqueue() to fail before the work
initializers are reached. The resulting fail path entered
rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with
rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: publish QP after initialization
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list. |
