| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: detect a cycle in the last-kset chain during replay
cache_replay() follows the on-media last-kset chain by next_cache_seg_id
with no cond_resched(). A forged chain that points back into a segment it
has already visited makes the replay loop follow it forever.
Cap the last-kset hops at cache->n_segs; a valid chain visits each segment
at most once. |
| strongSwan 4.6.2 through 6.0.7 has an infinite loop in PKCS#5 decryption. |
| PocketMine-MP versions before 5.44.2 fail to properly validate multiple ResourcePackClientResponsePacket packets with STATUS_COMPLETED status during resource pack handling. Malicious clients can send batches of these packets to repeatedly trigger pre-spawn progression, creating duplicate Player objects and amplifying memory consumption and network traffic. |
| Previously, a channel registered in the mux's chanList is not usable until it is established. A malicious peer was able flood the channel's incomingRequests, deadlocking the entire connection. Now, we add an atomic established state, set when a channel becomes usable. Until such a time, handlePacket drops every packet other than the open confirmation/failure, without blocking and without tearing down the connection. |
| smol-toml is a small, fast, and correct TOML parser and serializer. Prior to 1.7.1, parse() can enter an infinite loop when a value inside an array or inline table is followed by a comment with no trailing newline. In src/util.ts, skipUntil() calls indexOfNewline(), receives -1 at the end of input, and resets the cursor to the beginning of the string instead of leaving the structure scan. The parser then hangs indefinitely and can consume a service's processing capacity when an application parses attacker-controlled TOML. This issue is fixed in version 1.7.1. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.1, and 12.0.1.0 through 12.0.12.28 and IBM Integration Bus for z/OS 10.1.0.0 through 10.1.0.7 could allow a remote attacker to cause a denial of service due to an infinite loop. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.3, the `pyasn1` library is vulnerable to a Denial of Service (DoS) attack caused by uncontrolled recursion when decoding ASN.1 data with deeply nested structures. An attacker can supply a crafted payload containing thousands of nested `SEQUENCE` (`0x30`) or `SET` (`0x31`) tags with "Indefinite Length" (`0x80`) markers. This forces the decoder to recursively call itself until the Python interpreter crashes with a `RecursionError` or consumes all available memory (OOM), crashing the host application. This is a distinct vulnerability from CVE-2026-23490 (which addressed integer overflows in OID decoding). The fix for CVE-2026-23490 (`MAX_OID_ARC_CONTINUATION_OCTETS`) does not mitigate this recursion issue. Version 0.6.3 fixes this specific issue. |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker could cause excessive iteration. A successful exploit of this vulnerability might lead to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
block: mark GFP_NOIO around sysfs ->store()
sysfs ->store is called with queue freezed, meantime we have several
->store() callbacks(update_nr_requests, wbt, scheduler) to allocate
memory with GFP_KERNEL which may run into direct reclaim code path,
then potential deadlock can be caused.
Fix the issue by marking NOIO around sysfs ->store() |
| A security issue was discovered in the LRA Coordinator component of Narayana. When Cancel is called in LRA, an execution time of approximately 2 seconds occurs. If Join is called with the same LRA ID within that timeframe, the application may crash or hang indefinitely, leading to a denial of service. |
| Previously, after a channel has been established, a malicious peer could send crafted messages that would deadlock the entire connection. Now, we handle all RFC 4254 channel messages; global requests are handled explicitly. Then, treat all other messages as a protocol error and tear the connection down instead of buffering and blocking. |
| @fastify/busboy is a multipart form-data parser. In versions 3.1.0 through 3.2.0, a remote unauthenticated attacker can stall the Node.js event loop by sending a multipart request whose boundary is crafted to a specific length. The vendored streaming search stores its skip table in a fixed 256 entry byte array, and a boundary of exactly 252 bytes makes the search needle 256 bytes, which truncates the default skip distance to zero and turns the search into a CPU bound loop on a small body. A single small request can keep one core busy and deny service to other requests handled by the same process. The issue is fixed in @fastify/busboy 3.2.1, which widens the skip table so the skip distance is preserved. Users should upgrade to 3.2.1. |
| Net::DNS versions before 1.57 for Perl allow memory exhaustion via unbounded recursion in sig_data when re-encoding a message with a misplaced TSIG record.
sig_data signs a message by re-encoding it, and removes TSIG records only from the additional section. A TSIG decoded into the answer or authority section survives that step and is signed again, so encoding re-enters sig_data with no termination condition. Decoding does not reject such a message: a TSIG that is not the last record on the wire raises "misplaced or corrupt TSIG", but the error is caught, reported as a warning, and the record is left in the packet. RFC 8945 section 5.2 requires the message to be dropped.
The recursion is reached only when the decoded TSIG carries an empty MAC, since a MAC recovered from the wire short-circuits the signing step. It is reached only from code that re-encodes a message it decoded, such as a forwarder or a proxy. A decoded message that is never re-encoded is unaffected. Message direction does not matter: a query reaches the same path as a response.
Each cycle re-encodes the whole message, so fewer than 100 bytes on the wire exhaust available memory and terminate the process. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix hard lockup on disconnect
If submitting the OOB write urb fails persistently (e.g if the device is
being disconnected) the driver would loop indefinitely with interrupts
disabled.
Check for urb submission errors when sending OOB commands to avoid
hanging if, for example, open(), set_termios() or close() races with a
physical disconnect.
This is issue was flagged by Sashiko when reviewing an unrelated change
to the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call
The multiple runs of generic/013 test-case is capable
to reproduce a kernel BUG at mm/filemap.c:1504 with
probability of 30%.
while true; do
sudo ./check generic/013
done
[ 9849.452376] page: refcount:3 mapcount:0 mapping:00000000e58ff252 index:0x10781 pfn:0x1c322
[ 9849.452412] memcg:ffff8881a1915800
[ 9849.452417] aops:ceph_aops ino:1000058db9e dentry name(?):"f9XXXXXX"
[ 9849.452432] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 9849.452441] raw: 0017ffffc0000000 0000000000000000 dead000000000122 ffff88816110d248
[ 9849.452445] raw: 0000000000010781 0000000000000000 00000003ffffffff ffff8881a1915800
[ 9849.452447] page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio))
[ 9849.452474] ------------[ cut here ]------------
[ 9849.452476] kernel BUG at mm/filemap.c:1504!
[ 9849.478635] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
[ 9849.481772] CPU: 2 UID: 0 PID: 84223 Comm: fsstress Not tainted 7.0.0-rc1+ #18 PREEMPT(full)
[ 9849.482881] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-9.fc43 06/1
0/2025
[ 9849.484539] RIP: 0010:folio_unlock+0x85/0xa0
[ 9849.485076] Code: 89 df 31 f6 e8 1c f3 ff ff 48 8b 5d f8 c9 31 c0 31 d2 31 f6 31 ff c3 cc
cc cc cc 48 c7 c6 80 6c d9 a7 48 89 df e8 4b b3 10 00 <0f> 0b 48 89 df e8 21 e6 2c 00 eb 9d 0f 1f 40 00 66 66 2e 0f 1f 84
[ 9849.493818] RSP: 0018:ffff8881bb8076b0 EFLAGS: 00010246
[ 9849.495740] RAX: 0000000000000000 RBX: ffffea00070c8980 RCX: 0000000000000000
[ 9849.498678] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 9849.500559] RBP: ffff8881bb8076b8 R08: 0000000000000000 R09: 0000000000000000
[ 9849.501097] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000010782000
[ 9849.502108] R13: ffff8881935de738 R14: ffff88816110d010 R15: 0000000000001000
[ 9849.502516] FS: 00007e36cbe94740(0000) GS:ffff88824a899000(0000) knlGS:0000000000000000
[ 9849.502996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9849.503810] CR2: 000000c0002b0000 CR3: 000000011bbf6004 CR4: 0000000000772ef0
[ 9849.504459] PKRU: 55555554
[ 9849.504626] Call Trace:
[ 9849.505242] <TASK>
[ 9849.505379] netfs_write_begin+0x7c8/0x10a0
[ 9849.505877] ? __kasan_check_read+0x11/0x20
[ 9849.506384] ? __pfx_netfs_write_begin+0x10/0x10
[ 9849.507178] ceph_write_begin+0x8c/0x1c0
[ 9849.507934] generic_perform_write+0x391/0x8f0
[ 9849.508503] ? __pfx_generic_perform_write+0x10/0x10
[ 9849.509062] ? file_update_time_flags+0x19a/0x4b0
[ 9849.509581] ? ceph_get_caps+0x63/0xf0
[ 9849.510259] ? ceph_get_caps+0x63/0xf0
[ 9849.510530] ceph_write_iter+0xe79/0x1ae0
[ 9849.511282] ? __pfx_ceph_write_iter+0x10/0x10
[ 9849.511839] ? lock_acquire+0x1ad/0x310
[ 9849.512334] ? ksys_write+0xf9/0x230
[ 9849.512582] ? lock_is_held_type+0xaa/0x140
[ 9849.513128] vfs_write+0x512/0x1110
[ 9849.513634] ? __fget_files+0x33/0x350
[ 9849.513893] ? __pfx_vfs_write+0x10/0x10
[ 9849.514143] ? mutex_lock_nested+0x1b/0x30
[ 9849.514394] ksys_write+0xf9/0x230
[ 9849.514621] ? __pfx_ksys_write+0x10/0x10
[ 9849.514887] ? do_syscall_64+0x25e/0x1520
[ 9849.515122] ? __kasan_check_read+0x11/0x20
[ 9849.515366] ? trace_hardirqs_on_prepare+0x178/0x1c0
[ 9849.515655] __x64_sys_write+0x72/0xd0
[ 9849.515885] ? trace_hardirqs_on+0x24/0x1c0
[ 9849.516130] x64_sys_call+0x22f/0x2390
[ 9849.516341] do_syscall_64+0x12b/0x1520
[ 9849.516545] ? do_syscall_64+0x27c/0x1520
[ 9849.516783] ? do_syscall_64+0x27c/0x1520
[ 9849.517003] ? lock_release+0x318/0x480
[ 9849.517220] ? __x64_sys_io_getevents+0x143/0x2d0
[ 9849.517479] ? percpu_ref_put_many.constprop.0+0x8f/0x210
[ 9849.517779] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 9849.518073] ? do_syscall_64+0x25e/0x1520
[ 9849.518291] ? __kasan_check_read+0x11/0x20
[ 9849.518519] ? trace_hardirqs_on_prepare+0x178/0x1c0
[ 9849.518799] ? do_syscall_64+0x27c/0x1520
[ 9
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential deadlock in write-through mode
Fix netfs_advance_writethrough() to always unlock the supplied folio and to
mark it dirty if it isn't yet written to the end. Unfortunately, it can't
be marked for writeback until the folio is done with as that may cause a
deadlock against mmapped reads and writes.
Even though it has been marked dirty, premature writeback can't occur as
the caller is holding both inode->i_rwsem (which will prevent concurrent
truncation, fallocation, DIO and other writes) and ictx->wb_lock (which
will cause flushing to wait and writeback to skip or wait).
Note that this may be easier to deal with once the queuing of folios is
split from the generation of subrequests. |
| An attacker who can publish to a queue consumed by an application that has enabled message decompression can crash the consumer JVM with a single ~1 MB message.
Spring AMQP 4.1.0
Spring AMQP 4.0.0 - 4.0.4
Spring AMQP 3.2.0 - 3.2.12
Spring AMQP 2.4.18 and earlier |
| In Reactor Core, applications that use the Flux.bufferTimeout operator with fairBackpressure enabled are vulnerable to a Denial of Service (DoS) condition.
Reactor Core 3.8.0 - 3.8.6
Reactor Core 3.7.19 and earlier |
| A flaw was found in libssh. A remote authenticated peer can advertise a zero maximum packet size in SSH_MSG_CHANNEL_OPEN, causing later channel writes to loop indefinitely and consume CPU, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: enable the right set of ciphers
The firmware version number check for IGTK introduced in
commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key")
lets the amount of ciphers decrease on every boot of a too old firmware and
that is practically happening. It also does not take into account other
chips than the wl18xx. On some wl128x, the following can be observed
when connecting via nm to a common ap:
[ 484.113311] wlcore: WARNING could not set keys
[ 484.117828] wlcore: ERROR Could not add or replace key
[ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5)
[ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142
[ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1
[ 484.145721] wlcore: down
[ 484.148986] ieee80211 phy0: Hardware restart was requested
[ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142)
[ 484.633758] wlcore: Association completed.
[ 484.690490] wlcore: ERROR command execute failure 14
[ 484.690490] ------------[ cut here ]------------
[ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892
This repeats endlessly.
Always disable IGTK on wl12xx and fix the decrementing mess. |
