Export limit exceeded: 413794 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26027 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98861 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching() unregister_fprobe() and unregister_fprobe_async() (used by BPF kprobe-multi) rely on standard RCU grace periods (synchronize_rcu() and call_rcu()) to wait until in-flight fprobe handlers complete before freeing the fprobe. However, if an fprobe handler executes while RCU is not watching (such as in the idle loop or nohz_full extended quiescent states), standard RCU does not track preemption-disabled sections. Consequently, synchronize_rcu() does not wait for those executions, which can lead to a use-after-free if the fprobe is freed immediately after unregistration. Ensure handlers exit early when !rcu_is_watching(). Furthermore, fprobe_fgraph_entry() and fprobe_ftrace_entry() previously used guard(rcu)() and rcu_read_lock(), which invoke lockdep on every hit under CONFIG_PROVE_LOCKING. This adds overhead and can cause lockdep recursion if probed functions interact with lockdep. Since rhltable_lookup() and rhl_for_each_entry_rcu() use rcu_dereference_all_check() (which checks rcu_read_lock_any_held()), holding preemption disabled via rcu_read_lock_sched_notrace() is fully valid and sufficient so long as rcu_is_watching() is true. Define and use guard(rcu_sched_notrace)() across fprobe_ftrace_entry(), fprobe_fgraph_entry(), and fprobe_return(). This eliminates fast-path rcu_read_lock() and lockdep overhead while guaranteeing safe grace period synchronization. | ||||
| CVE-2026-98677 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix use-after-free on unbind ad_sd_buffer_postenable() allocates sigma_delta->samples_buf with devm_krealloc() at runtime, so its devres entry sits after all probe-time entries of the driver. devm resources are released in reverse allocation order, which means unbind frees samples_buf before iio_device_unregister() disables the buffers and detaches the trigger pollfunc. The data ready IRQ is still enabled at that point, so ad_sd_trigger_handler() can still run and memcpy() incoming samples into the freed samples_buf. Fix this by preallocating the buffer in devm_ad_sd_setup_buffer_and_trigger(), before the triggered buffer and the IRQ are set up, so it is freed only after iio_device_unregister() has drained the trigger handler via free_irq(). Size it for the worst case of all sequencer slots being active; ad_sd_validate_scan_mask() already caps the number of active channels at num_slots. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98681 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races The invalidHandle, swapfile, oplock_break_cancelled, offload, and status_file_deleted fields are stored in the same bitfield byte in struct cifsFileInfo, but are updated in different code paths that may run simultaneously, and are protected by different locks. Since bitfield assignments generate byte-level read-modify-write operations, a modification to one flag can overwrite a concurrent modification to another flag. To avoid these races, convert these flags from a bitfield to separate bool fields. | ||||
| CVE-2026-98685 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via clone range cifs_remap_file_range() discarded the pagecache only for the folios overlapping the destination region, so when a clone extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Start the discard at the smaller of fstart and the old EOF. i_size is still old here, so nothing past the old EOF is flushed to the server. | ||||
| CVE-2026-98693 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Hold a router reference for each allocated HopID tb_stop() drops the reference to all DP tunnels but does not deactivate them, thus nothing cancels a dprx_work still in flight (which holds its own tunnel reference) and the tunnel can outlive tb_switch_remove(). The HopID releases in tb_path_free() then operate on freed IDAs and trigger warnings like ida_free called for id=8 which is not allocated. This can be triggered by unbinding the driver while a DP tunnel is still waiting for the DPRX capabilities read to finish. On the Apple NHI unplugging the cable runs into just that reliably because the read can never finish right now and because the unplug powers down the entire USB4 complex and removes the NHI device. Take a router reference whenever an input or output HopID is allocated and drop it again after the HopID is released. This keeps the ports and their HopID IDAs alive for as long as they are used. The KUnit tests allocate routers without ever registering their devices so initialize the embedded struct device there as well and drop its initial reference when the test is finished. | ||||
| CVE-2026-98762 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: dwc2: shut down wakeup timer before freeing HCD state dwc2_wakeup_detected() accesses the DWC2 host state and can rearm the wakeup timer. dwc2_hcd_free() currently deletes the timer only after freeing host-owned state, and timer_delete() does not synchronize a callback or prevent it from being queued again. Stop and shut down the timer in dwc2_hcd_release(), before the HCD resources are freed. This covers both the HCD initialization error path and normal HCD removal. | ||||
| CVE-2026-98830 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: validate MIB read length before copying to caller wfx_hif_read_mib() copies reply->length bytes from the firmware response into the caller-provided buffer without checking that reply->length does not exceed val_len. A firmware response with a length field larger than expected overruns the caller buffer and reads past the end of the reply allocation. Replace the dead -ENOMEM check with an active validation that reply->length fits within val_len before the memcpy. | ||||
| CVE-2026-63846 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef) | ||||
| CVE-2026-63848 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) | ||||
| CVE-2026-63849 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.1 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit e16be95a2c3ee712b142cb27d2dca0b461181359) | ||||
| CVE-2026-63847 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) | ||||
| CVE-2026-63850 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317) | ||||
| CVE-2026-63845 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) | ||||
| CVE-2026-63844 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.3 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 2f6afc97d259d530f4f86c7743efbc573a8da927) | ||||
| CVE-2026-63843 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit f05d0a4f21fc720116d6e238f23308b199891058) | ||||
| CVE-2026-63842 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 0f43893d3cd478fa57836697525b338817c9c23d) | ||||
| CVE-2026-63841 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.1 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 742a98e2e81702df8fe1b1eccee5223220a03dc2) | ||||
| CVE-2026-63830 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: skmsg: preserve sg.copy across SG transforms The sk_msg sg.copy bitmap is part of the scatterlist entry ownership state. A set bit tells sk_msg_compute_data_pointers() not to expose the entry through writable BPF ctx->data. This protects entries backed by pages that are not private to the sk_msg, such as splice-backed file page-cache pages. Several sk_msg transform paths move, copy, split, or compact msg->sg.data[] entries without moving the matching sg.copy bit. This can make an externally backed entry arrive at a new slot with a clear copy bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable ctx->data and BPF stores can modify the original page cache. Keep sg.copy synchronized with sg.data[] whenever entries are transferred, shifted, split, or copied into a new sk_msg. Clear the bit when an entry is replaced by a newly allocated private page or freed. This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(), sk_msg_xfer(), and tls_split_open_record(), including the partial tail entry created during TLS open-record splitting. | ||||
| CVE-2026-98121 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix NULL pointer dereference in PM callbacks msc313e_wdt_probe() doesn't set the driver data for the platform device. As a result, dev_get_drvdata() in msc313e_wdt_suspend() and msc313e_wdt_resume() will return NULL, leading to a NULL pointer dereference afterward. Set the platform device driver data in msc313e_wdt_probe(). | ||||
| CVE-2026-98122 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del() vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every MDBE_ATTR_SRC_LIST member, accepts the all-zeros address. A source list is only accepted on a (*, G) entry, whose source is the all-zeros address, and for each member of the list an (S, G) entry is derived from it by substituting the source. Entries are keyed by a plain memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present and holds the all-zeros address and the source list holds it as well, the derived (S, G) key is byte-identical to the (*, G) key and resolves to the same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is then left with a zero address family. vxlan_mdb_remote_src_del() removes the forwarding entry of a source before freeing the source entry: vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr); vxlan_mdb_remote_src_entry_del(ent); With the keys aliased, the first call deletes the remote of the entry that owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second call then runs on the freed entry, and its hlist_del() reads ->pprev and ->next out of it and writes through them. Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the all-zeros source for deletion and reaches this from the sweep at the end of vxlan_mdb_remote_srcs_replace(). BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70 Read of size 8 at addr ffff888102852500 by task poc/84 __vxlan_mdb_add+0x1cd/0xd70 vxlan_mdb_add+0xc0/0x140 rtnl_mdb_add+0x157/0x2a0 rtnetlink_rcv_msg+0x207/0x5a0 Allocated by task 84: __kmalloc_cache_noprof+0x153/0x360 vxlan_mdb_remote_srcs_add+0x2eb/0x440 __vxlan_mdb_add+0x803/0xd70 Freed by task 84: kfree+0x14c/0x3b0 vxlan_mdb_remote_del+0x129/0x1a0 __vxlan_mdb_del+0x4f/0xe0 vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0 __vxlan_mdb_add+0x1c5/0xd70 The MDB operations are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers both call sites. A (*, G) entry is expressed by omitting the source, so nothing legitimate is refused. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||