| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OP-TEE OS through 4.10.0, fixed in commit 7b8b494, contains a buffer underwrite vulnerability in the RSA NOPAD encrypt and decrypt operations within the mbedTLS software backend and SE050 hardware driver that allows a malicious Trusted Application to corrupt secure-world heap memory by supplying an input length exceeding the RSA modulus size. When src_len exceeds rsa_len, the subtraction expression wraps to a large unsigned value, causing a subsequent memcpy to write attacker-controlled data before the destination buffer in S-EL1 secure-world heap memory. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Inject SEA if guest VNCR isn't normal memory
When constructing an L1 VNCR mapping, KVM unconditionally uses cacheable
memory attributes, even if the underlying PFN isn't memory. This gets
particularly hairy if the endpoint doesn't support cacheable memory
attributes, potentially throwing an SError on writeback...
While KVM does permit cacheable memory attributes on certain PFNMAP
VMAs, kvm_translate_vncr() isn't currently grabbing the VMA. So do the
simpler thing for now and just reject everything that isn't memory. |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, GlancesActions.run() in glances/actions.py ignores --disable-config-exec for on-alert action commands and invokes secure_popen() with shell operators enabled, allowing configured redirection, command chaining, or pipes to execute when an alert triggers. This issue is fixed in 4.5.6. |
| OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.4, 1.1.4, and 1.2.0-rc.2, OpenChoreo Workflow Plane templates under samples/getting-started/workflow-templates/ interpolated developer-controlled workflow parameters into shell program text executed through sh -c instead of passing the values through container.env, allowing arbitrary commands to run in workflow pods while affected privileged Podman templates lacked hostUsers: false. This issue is fixed in versions 1.0.4, 1.1.4, and 1.2.0-rc.2. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 contains a input validation vulnerability in the management interface that allows already privileged attackers to execute additional operations by crafting a malicious HTTP request. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of shell metacharacters. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. |
| The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formTracerouteDiagnosticRun interface. A remote attacker can inject arbitrary malicious commands into the host and ipVer fields, resulting in command execution with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing
xdr_buf_to_bvec() writes a bio_vec into the caller's array before
testing whether that slot is in range, and the head branch performs
the store with no check at all. When the caller's budget is exactly
used up, the next store lands one element past the end of the array.
The overflow label returns count - 1, which masks the surplus store
but cannot undo it.
rq_bvec, the array passed by nfsd_vfs_write(), is allocated to
exactly rq_maxpages entries with no slack. The OOB store can land in
adjacent slab memory; the bv_len and bv_offset fields written there
are derived from client-supplied RPC payload sizes.
Move the in-range check ahead of the store in the head, page-loop,
and tail branches. With the check at the top of each sequence, count
is incremented only after a successful store, so the overflow label
can return count directly. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to a stack-based buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post()
qrtr_endpoint_post() validates an incoming packet with
if (!size || len != ALIGN(size, 4) + hdrlen)
goto err;
where size comes from the wire. On 32-bit, size_t is 32 bits and
ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check
passes and skb_put_data(skb, data + hdrlen, size) writes past the
hdrlen-sized skb and oopses the kernel. 64-bit is unaffected.
This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB
Read in qrtr_endpoint_post"), which fixed only the 64-bit case.
Reject any size that cannot fit the buffer before the ALIGN. |
| A vulnerability was detected in GL.iNet A1300, AX1800, AXT1800, MT2500, MT3000, MT6000, X3000 and XE3000 4.8.x. This issue affects some unknown processing of the file /usr/bin/gl_nas_sys of the component NAS Command Service. The manipulation results in os command injection. The attack may be launched remotely. Upgrading to version 4.9.0 is capable of addressing this issue. It is suggested to upgrade the affected component. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to a heap-based buffer overflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to execute arbitrary code due to an out-of-bounds write. |
| Exposed methods allow authenticated users to create and execute arbitrary JavaScript code on the server. The scripts execute with full access, enabling complete system compromise as commands are executed as root. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the
free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is
wrong: dp_peer->peer_id for an MLO peer always carries the
ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with
index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS
(256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The
intended bitmap entry also never gets cleared, so subsequent
ath12k_peer_ml_alloc() calls eventually run out of IDs.
The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and
is stored in ahsta->ml_peer_id. Use that instead.
While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so
the bitmap and ahsta->ml_peer_id stay in sync.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to execute arbitrary code due to a buffer overflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to a buffer overflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 s vulnerable to a buffer overflow from improperly validating client data. By sending malformed requests to one of the host servers, a remote attacker could leverage this vulnerability to cause a denial-of-server (DoS) for that server. |
