| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| WebSocket endpoints lack proper authentication mechanisms, enabling
attackers to perform unauthorized station impersonation and manipulate
data sent to the backend. An unauthenticated attacker can connect to the
OCPP WebSocket endpoint using a known or discovered charging station
identifier, then issue or receive OCPP commands as a legitimate charger.
Given that no authentication is required, this can lead to privilege
escalation, unauthorized control of charging infrastructure, and
corruption of charging network data reported to the backend. |
| macrozheng mall version 1.0.3 and prior contains an authentication vulnerability in the mall-portal password reset workflow that allows an unauthenticated attacker to reset arbitrary user account passwords using only a victim’s telephone number. The password reset flow exposes the one-time password (OTP) directly in the API response and validates password reset requests solely by comparing the provided OTP to a value stored by telephone number, without verifying user identity or ownership of the telephone number. This enables remote account takeover of any user with a known or guessable telephone number. |
| Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2. |
| Snews CMS 1.7 contains an unrestricted file upload vulnerability that allows unauthenticated attackers to upload arbitrary files including PHP executables to the snews_files directory. Attackers can upload malicious PHP files through the multipart form-data upload endpoint and execute them by accessing the uploaded file path to achieve remote code execution. |
| PolarLearn is a free and open-source learning program. In 0-PRERELEASE-15 and earlier, POST /api/v1/auth/sign-in creates a valid session for banned accounts before verifying the supplied password. That session is then accepted across authenticated /api routes, enabling account data access and authenticated actions as the banned user. |
| goshs is a SimpleHTTPServer written in Go. Prior to 2.0.0-beta.4, goshs enforces the documented per-folder .goshs ACL/basic-auth mechanism for directory listings and file reads, but it does not enforce the same authorization checks for state-changing routes. An unauthenticated attacker can upload files with PUT, upload files with multipart POST /upload, create directories with ?mkdir, and delete files with ?delete inside a .goshs-protected directory. By deleting the .goshs file itself, the attacker can remove the folder's auth policy and then access previously protected content without credentials. This results in a critical authorization bypass affecting confidentiality, integrity, and availability. This vulnerability is fixed in 2.0.0-beta.4. |
| A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. Affected is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument maxRtrAdvInterval causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| Smart Slider 3 Pro version 3.5.1.35 for WordPress and Joomla contains a multi-stage remote access toolkit injected through a compromised update system that allows unauthenticated attackers to execute arbitrary code and commands. Attackers can trigger pre-authentication remote shell execution via HTTP headers, establish authenticated backdoors accepting arbitrary PHP code or OS commands, create hidden administrator accounts, exfiltrate credentials and access keys, and maintain persistence through multiple injection points including must-use plugins and core file modifications. |
| Epross AVCON6 systems management platform contains an object-graph navigation language (OGNL) injection vulnerability that allows unauthenticated attackers to execute arbitrary commands by injecting malicious OGNL expressions. Attackers can send crafted requests to the login.action endpoint with OGNL payloads in the redirect parameter to instantiate ProcessBuilder objects and execute system commands with root privileges. |
| NetGain EM Plus 10.1.68 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary system commands by submitting malicious parameters to the script_test.jsp endpoint. Attackers can send POST requests with shell commands embedded in the 'content' parameter to execute code and retrieve command output. |
| An Authentication Bypass Using an
Alternate Path or Channel vulnerability in Juniper Networks Session Smart
Router may allows a network-based attacker to bypass authentication
and take administrative control of the device.
This issue affects Session Smart Router:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2;
This issue affects Session Smart Conductor:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2;
This issue affects WAN Assurance Managed Routers:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2. |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Instantel Micromate lacks authentication on a configuration port which could allow an attacker to execute commands if connected. |
| Pro3W CMS if vulnerable to SQL injection attacks. Improper neutralization of input provided into a login form allows an unauthenticated attacker to bypass authentication and gain administrative privileges.
This issue was identified in version 1.2.0 of this software. Due to lack of response from the vendor exact version range could not be determined, but the vulnerability should be eliminated in versions released in January 2026 and later. |
| Clinic’s Patient Management System versions 2.0 suffers from a SQL injection vulnerability in the login page. |
| An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC. |
| An unauthenticated OS command injection vulnerability exists in the Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02). When configuring the device in Extender mode via its captive portal, the extap2g SSID field is inserted unescaped into a reboot-time shell script. This allows remote attackers within Wi-Fi range to inject arbitrary shell commands that execute as root during device reboot, leading to full system compromise. |
| UNI-NMS-Lite uses hard-coded credentials that could allow an
unauthenticated attacker to gain administrative privileges to all
UNI-NMS managed devices. |
| The CS5000 Fire Panel is vulnerable due to a hard-coded password that
runs on a VNC server and is visible as a string in the binary
responsible for running VNC. This password cannot be altered, allowing
anyone with knowledge of it to gain remote access to the panel. Such
access could enable an attacker to operate the panel remotely,
potentially putting the fire panel into a non-functional state and
causing serious safety issues. |
