| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: free stashed qentry before overwrite in REQ_ADD_LINK to ADD_LINK transition
When smc_llc_event_handler() transitions the local LLC flow from
SMC_LLC_FLOW_REQ_ADD_LINK to SMC_LLC_FLOW_ADD_LINK on arrival of an ADD_LINK
request, it calls smc_llc_flow_qentry_set() unconditionally:
if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_REQ_ADD_LINK) {
lgr->llc_flow_lcl.type = SMC_LLC_FLOW_ADD_LINK;
smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry);
...
}
A CONFIRM_LINK or ADD_LINK_CONT arriving while flow->type is
SMC_LLC_FLOW_REQ_ADD_LINK is stashed into flow->qentry via the
SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT handler (which stores into
flow->qentry for any non-NONE flow type). When the subsequent ADD_LINK
arrives, the REQ_ADD_LINK branch overwrites flow->qentry with the new pointer
without first freeing the stashed allocation, leaking one kmalloc object.
The stashed entry has no consumer: smc_llc_wait() is only called from
llc_add_link_work, which is not yet scheduled while the flow type remains
REQ_ADD_LINK. No waiter is sleeping on llc_msg_waiter at this point.
It is safe to unconditionally free any stashed qentry before
the overwrite.
Call smc_llc_flow_qentry_del() before smc_llc_flow_qentry_set() in the
REQ_ADD_LINK branch. smc_llc_flow_qentry_del() already checks flow->qentry
before freeing, so the normal path where no entry is stashed is a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: fix wrong list iterated in add_direct_chain error path
In add_direct_chain(), newly allocated direct MR entries are added to
the local list 'tmp', which is spliced into mr->head only on success.
On the error path, the cleanup loop was incorrectly iterating over
mr->head instead of tmp.
Fix by iterating over 'tmp' in the err_alloc cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: check for NULL root inode in fuse_fill_super_submount
fuse_iget() can return NULL when its inode allocation fails, but
fuse_fill_super_submount() passed the result straight to get_fuse_inode()
and decremented fi->nlookup without checking it:
root = fuse_iget(sb, parent_fi->nodeid, ...);
fi = get_fuse_inode(root);
fi->nlookup--;
Inside fuse_iget() the inode allocation can fail and return NULL. The
submount root takes the iget5_locked() path, whose alloc_inode() can fail
under memory pressure (the auto-submount branch can fail the same way in
new_inode() or fuse_alloc_submount_lookup()):
inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set,
&nodeid);
if (!inode)
return NULL;
A NULL root makes get_fuse_inode() a container_of() on NULL and the
nlookup decrement a write to a bogus address, oopsing the mount. With
CONFIG_KASAN the following null pointer dereference is reported when the
root inode allocation of an auto-submount fails (e.g. under memory
pressure):
==================================================================
BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0
Read of size 8 at addr 00000000000002b0 by task ls/942
CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15
Call Trace:
<TASK>
fuse_get_tree_submount+0x656/0x8b0
vfs_get_tree+0x48/0x140
fc_mount+0x13/0x50
fuse_dentry_automount+0x7a/0xb0
__traverse_mounts+0xca/0x330
step_into+0x339/0xac0
path_lookupat+0xc5/0x2f0
filename_lookup+0x163/0x2a0
vfs_statx+0xd5/0x200
do_statx+0x83/0xd0
__x64_sys_statx+0xa0/0xc0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x78/0xe2
</TASK>
==================================================================
Return -ENOMEM instead; the caller tears down the partially built
superblock on error, matching the other error returns in this
function. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Replace ly instruction with llgf
cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads
the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does. |
| LMDeploy is a toolkit for compressing, deploying, and serving large language models. Starting in version 0.9.2 and prior to version 0.16.0, LMDeploy's PyTorch DistServe/PD-disaggregation control plane used `recv_pyobj()` to deserialize messages received through a ZeroMQ PULL socket. PyZMQ implements `recv_pyobj()` using Python pickle deserialization, which can execute arbitrary code while reconstructing an object. The peer address used by the receiver was supplied through the `POST /distserve/p2p_connect` HTTP endpoint. An attacker who could reach an affected DistServe API server could cause the server to connect to an attacker-controlled ZeroMQ endpoint and deserialize a crafted pickle payload. API-key authentication is not enabled unless the operator explicitly configures it. As a result, affected DistServe deployments without API keys allowed unauthenticated remote code execution with the privileges of the LMDeploy serving process. This issue affects the PyTorch backend when PD-disaggregation/DistServe is enabled. Ordinary deployments that do not use the affected disaggregated-serving path do not expose this data flow. The fix was released in LMDeploy 0.16.0. Users who cannot upgrade immediately should prevent untrusted clients from reaching `/distserve/*` endpoints, restrict the DistServe HTTP and ZeroMQ control planes to trusted cluster networks, configure API-key authentication, and block arbitrary outbound ZeroMQ connections from serving nodes. These measures reduce exposure but do not make pickle deserialization safe. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix off-by-one page overflow in ntfs_decompress()
The per-token range check in ntfs_decompress() uses
if (cb >= cb_sb_end || dp_addr > dp_sb_end)
break;
so dp_addr == dp_sb_end falls through to the symbol copy
`*dp_addr++ = *cb++`, writing one byte past the destination page. Since
NTFS_SB_SIZE == PAGE_SIZE the destination is a single page, so the byte
lands in the adjacent page, and *dest_ofs is left one past the sub-block
end (the later `*dest_ofs &= ~PAGE_MASK` then yields 1, not 0, so the page
is never finalized and later sub-blocks keep writing further past it). A
corrupted compressed $DATA attribute thus produces a bounded run of
out-of-bounds writes when the file is read.
Break as soon as dp_addr reaches dp_sb_end; a full sub-block still
completes, as its final copy advances dp_addr to exactly dp_sb_end. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: visconti: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
visconti_clk_register_gate() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pcf8563: fix clock provider leak on unbind
pcf8563_clkout_register_clk() registers the CLKOUT clock provider with
of_clk_add_provider(), but nothing ever unwinds it: there is no
of_clk_del_provider() call and the driver has no remove callback. Each
of_clk_add_provider() allocates a struct of_clk_provider, takes a
reference on the OF node and adds an entry to the global of_clk_providers
list, none of which is released when the device is unbound. Every
bind/unbind (or module reload) therefore leaks a provider structure and
an of_node reference.
The clock itself is already device-managed (devm_clk_register()); only
the provider registration was not. Use devm_of_clk_add_hw_provider() so
the provider is removed automatically on unbind. Tie it to the parent
i2c device, whose OF node carries the #clock-cells and clock-output-names
properties (the RTC class device has no OF node of its own). |
| In the Linux kernel, the following vulnerability has been resolved:
hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed
Previously, hinic3_send_one_skb() cached the skb fragment count before
calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to
skb_checksum_help() for unsupported tunnel packets, the skb may be
linearized. Continuing to build the TX descriptor with the stale
fragment count leads to a descriptor mismatch, which can trigger
out-of-bounds DMA reads or IOMMU faults.
Furthermore, the old code ignored the return value of skb_checksum_help(),
transmitting corrupted packets with incomplete checksums upon failure.
Fix this by:
1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to
ensure the correct fragment count is used if the SKB is linearized.
2. Propagating skb_checksum_help() errors and returning
HINIC3_TX_OFFLOAD_INVALID to properly drop the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race
This bug was discovered while testing the hns3 driver under channel
reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on
arm64. The race is intermittently triggered when page_pool_destroy()
runs page_pool_scrub() concurrently with page return via
page_pool_put_netmem() on a different CPU. A WARN in
page_pool_clear_pp_info() surfaced the dangling DMA index bits left
by the cmpxchg loser, which led to the investigation.
page_pool_scrub() iterates pool->dma_mapped via xa_for_each() with no
page ref held. __page_pool_release_netmem_dma() currently reads and
writes netmem fields (dma_addr, DMA index bits in pp_magic) after
xa_cmpxchg() returns. The unref path calls put_page() unconditionally
regardless of the cmpxchg outcome; when it loses the cmpxchg, it still
frees the page before the scrub winner finishes these netmem accesses,
so scrub touches a freed page -- a Use-After-Free.
Fix this by splitting the DMA release into two functions:
1. __page_pool_unmap_netmem_dma() caches dma_addr before xa_cmpxchg(),
does the cmpxchg to remove the DMA mapping, and calls dma_unmap on
the cached address. It never touches netmem fields after the cmpxchg,
making it safe for the scrub path which holds no page ref.
2. __page_pool_release_netmem_dma() wraps the above and additionally
clears dma_addr and DMA index bits in netmem fields. This is safe
only when the caller holds a page ref, so it is used by the return
path (page_pool_return_netmem).
The scrub path calls __page_pool_unmap_netmem_dma() directly; the return
path calls __page_pool_release_netmem_dma(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF in bpf_trampoline_multi_attach_free on update failure
When bpf_trampoline_update() fails before modify_fentry_multi()/
unregister_fentry_multi() is called, cur_image is unchanged
(cur_image == old_image) and ftrace still calls into it. Freeing
old_image in that case causes a UAF.
Only free old_image when it differs from cur_image. |
| c-ares is an asynchronous resolver library. Prior to 1.34.7, ares_dns_parse() trusts the attacker-controlled ANCOUNT, NSCOUNT, and ARCOUNT fields before confirming that the DNS response contains enough bytes for the claimed records. Because process_answer() invokes parsing before transaction ID and question validation, a malicious DNS response can cause ares_dns_record_rr_prealloc() and ares_array_set_size() to reserve disproportionate heap memory for a tiny message. Repeated responses create large allocation and release cycles that can degrade or deny name resolution, without causing memory corruption or information disclosure. This issue is fixed in version 1.34.7. |
| SysReptor is a fully customizable pentest reporting platform. Prior to 2026.55, an unauthenticated holder of a public note share link receives project-wide collaborative editing metadata because the public share consumer joins the same collaboration group as authenticated project members and forwards client information, connection, awareness, and deletion events without consistently restricting them to the shared note subtree. The disclosed metadata can identify project members through usernames and names and reveal the identifiers and live editing activity of notes that were not shared. The content of non-shared notes remains protected, and the issue does not grant write access. This issue is fixed in version 2026.55. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix NULL deref in NIX TM tree debugfs read path
rvu_dbg_nix_tm_tree_display() dereferences pfvf->sq_ctx without
checking whether the SQ context has been allocated. Reading
/sys/kernel/debug/octeontx2/nix/tm_tree for a NIX LF whose transmit
queues are not set up triggers a kernel oops.
Guard the read path the same way rvu_dbg_nix_tm_tree_write() already
does and return -EINVAL with a seq_file message when sq_ctx is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop
rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter
Negotiation) frame without checking for zero. When the remote peer
sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg
path to enter an infinite loop when fragmenting data, as each fragment
has size == min_t(size_t, len, 0) == 0, so the remaining length never
decreases. The infinite allocation of zero-length skbs exhausts all
system memory.
Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated
value is zero, consistent with the initial value assigned in
rfcomm_dlc_alloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Validate the FW dump header length
nxp_process_fw_dump() pulls the ACL header off the frame and then reads
seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data,
without checking that the ACL payload is long enough to contain it.
h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the
number of payload bytes named in that header, so skb->len is 4 + dlen
with dlen supplied by the controller and possibly smaller than the 8
byte dump header, or zero. A short frame with connection handle 0xfff
therefore reads both fields from beyond the received data.
Beyond the read itself, buf_len is what terminates a dump: a value of
zero makes the driver call hci_devcd_complete() and reset the
controller, so a truncated frame can end a dump early.
Use skb_pull_data() to validate and pull the FW dump header before
accessing its fields. Warn and reject the chunk if the header is
truncated. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtksdio: Fix out-of-bounds DMA read in the TX path
btmtksdio_tx_packet() rounds the transfer size up to the SDIO block size
of 256 bytes, but hands the host controller the SKB buffer as is:
err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data,
round_up(skb->len, MTK_SDIO_BLOCK_SIZE));
Only skb->len bytes hold packet data, so the controller reads up to 255
bytes of uninitialised memory and sends it to the device over the SDIO
bus. Depending on how much tailroom slack the SKB allocation happens to
carry, that read can also extend past the end of the buffer.
Compute the padded length up front, ensure the SKB has tailroom for it,
and zero-fill the padding with skb_put_zero(). skb->len then covers the
padding, so sdio_writesb() no longer needs to round up. byte_tx keeps
counting the header and the payload only, and the error path restores the
SKB so that the caller can requeue it.
Writing behind skb->tail is only safe because the driver owns the buffer,
which "Bluetooth: btmtksdio: Take exclusive ownership of the SKB before
TX" ensures. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check load-acquire src ptr type before the load
check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok().
For a load-acquire that fetches into its own source register (dst_reg ==
src_reg), check_load_mem() overwrites src_reg's type with the type of the
loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the
source pointer and fails to reject the disallowed types (ctx, pkt,
flow_keys, sock).
Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw
access to the underlying kernel object is left in place. The destination
type is taken from the ctx access itself, so a load-acquire of the sk
field of struct __sk_buff for example leaves the register typed as
PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match
either, while it actually holds unconverted struct sk_buff bytes. Once
the NULL check has passed this is a type confusion, not just a leak of
kernel data.
Validate src_reg with check_reg_arg() and check the source pointer type
with atomic_ptr_type_ok() before the load again, mirroring
check_atomic_rmw(). Out-of-range register numbers are already rejected
earlier by check_and_resolve_insns() (commit 503d21ef8eac ("bpf: Do
register range validation early")), and the only exemption there,
is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never
matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not
dereference register state out of bounds, that is, the out-of-bounds
read addressed by the Fixes commit below does not reappear (as proven
also via selftest). |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Fix memory overread in ring handler
`max_response` and `sensor_num` are read from different EC commands:
- `max_response` is from cros_ec_get_proto_info().
ec_dev->max_response = info->max_response_packet_size -
sizeof(struct ec_host_response);
- `sensor_num` is from cros_ec_get_sensor_count().
sensor_num = cros_ec_get_sensor_count(ec);
With a malfunctioning EC firmware, it is possible that the `msg->insize`
(i.e., `fifo_info_length` in the context) could be clamped in
cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`.
int fifo_info_length =
sizeof(struct ec_response_motion_sense_fifo_info) +
sizeof(u16) * sensorhub->sensor_num;
This means the number of read bytes could be less than expected. As a
result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler()
overreads the `resp->fifo_info` buffer.
Check the return value of cros_ec_cmd_xfer_status() and abort if the
number of bytes read does not match the expected length. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: quiesce input in hid_hw_stop() to prevent use-after-free
A driver's probe calls hid_device_io_start() to enable input delivery,
then fails at a later initialization step and unwinds via hid_hw_stop().
The unwind frees struct hidraw via hidraw_disconnect() while in-flight
HID reports may still be running on another CPU, dereferencing the
freed object through hidraw_report_event(). syzbot reports the
resulting use-after-free for the corsair-psu HID driver.
Edward Adam Davis posted a per-driver fix for corsair-psu that adds
an explicit hid_device_io_stop() before hid_hw_stop() in the probe
error path ("hwmon: prevent packets from going to driver for probe",
2026-04-28). Auditing the tree shows 15 drivers call
hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not:
drivers calling hid_device_io_start() without a matching
hid_device_io_stop() before hid_hw_stop():
drivers/hwmon/corsair-psu.c (fix posted by Edward)
drivers/hwmon/corsair-cpro.c
drivers/hwmon/nzxt-kraken3.c
drivers/hwmon/nzxt-smart2.c
drivers/hwmon/gigabyte_waterforce.c
drivers/hid/hid-logitech-dj.c
drivers/hid/hid-nintendo.c
drivers/hid/hid-mcp2221.c
Roughly half of all callers of the API are exposed. Centralize the
quiesce in hid_hw_stop() so callers do not have to remember the
matching stop: if a driver has left hdev->io_started true on entry,
call hid_device_io_stop() before hid_disconnect().
For the 7 drivers that already call hid_device_io_stop() correctly,
hdev->io_started is false on entry, the guard short-circuits, and
behavior is unchanged.
No Fixes: tag because the affected drivers gained their
hid_device_io_start() calls independently over years; the bug is a
class-wide API misuse rather than a regression from one commit. |
