| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mincore: handle non-swap entries before !CONFIG_SWAP guard
mincore_swap() also fields migration/hwpoison entries (and shmem
swapin-error entries), which can exist on !CONFIG_SWAP builds when
CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The
!IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return,
so mincore_pte_range() can spuriously WARN and report these pages
nonresident on !CONFIG_SWAP kernels.
Move the guard below the non-swap-entry check so only true swap entries
trip the WARN, and migration/hwpoison entries take the existing "uptodate
/ non-shmem" path. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow
Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from
VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in
__switch_to(). The read uses ldr, but the KASAN shadow address is
byte-granular and is not guaranteed to be word aligned.
ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and
CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to()
with an alignment exception before reaching init.
Use ldrb for the dummy shadow access. The code only needs to fault in the
shadow mapping if the stack shadow is missing, so a byte load is sufficient
and matches the granularity of KASAN shadow memory. |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock
During the SSR/PDR down notification the tx_lock is taken with the
intent to provide synchronization with active DMA transfers.
But during this period qcom_slim_ngd_down() is invoked, which ends up in
slim_report_absent(), which takes the slim_controller lock. In multiple
other codepaths these two locks are taken in the opposite order (i.e.
slim_controller then tx_lock).
The result is a lockdep splat, and a possible deadlock:
rprocctl/449 is trying to acquire lock:
ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus
but task is already holding lock:
ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl
which lock already depends on the new lock.
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ctrl->tx_lock);
lock(&ctrl->lock);
lock(&ctrl->tx_lock);
lock(&ctrl->lock);
The assumption is that the comment refers to the desire to not call
qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction.
But any such transaction is initiated and completed within a single
qcom_slim_ngd_xfer_msg().
Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn
down, all child devices are notified that the slimbus is gone and the
child devices are removed.
Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/ptrace: Use USER_REGSET_NOTE_TYPE for REGSET_CFI
Fixes a warning while dumping core:
[54983.546369][ C7] WARNING: [!note_name] fs/binfmt_elf.c:1771 at elf_core_dump+0x910/0xf68, CPU#7: abort01/31982 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task()
A WARN fires when systemd's user manager writes "+cpu +memory +pids" to
its own subtree_control while a sched_ext scheduler is loaded:
WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0
scx_cgroup_move_task+0xa8/0xb0
sched_move_task+0x134/0x290
cpu_cgroup_attach+0x39/0x70
cgroup_migrate_execute+0x37d/0x450
cgroup_update_dfl_csses+0x1e3/0x270
cgroup_subtree_control_write+0x3e7/0x440
scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu
cgroup changes. It can still be NULL when scx_cgroup_move_task() runs,
through this sequence:
Step Result
--------------------------------- ----------------------------------
1. cpu enabled on cgroup G cpu css = A
2. cpu toggled off then on for G A killed, B created (same cgroup)
3. an exiting task keeps A alive migration skips it, A now stale
4. +memory migrates G stale A vs current B pulls cpu in
5. cpu attach runs for all tasks hits a live, cpu-unchanged task
6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN
The mismatch is that scx_cgroup_can_attach() keys on cgroup identity
while migration drives the move on css identity, so a NULL cgrp_moving_from
here is a legitimate css-only migration, not a missing prep.
The call is already gated on cgrp_moving_from, so just drop the warning.
ops.cgroup_prep_move() and ops.cgroup_move() stay paired. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix clock and pinctrl state inconsistency in runtime PM
In i2c_imx_runtime_suspend(), the clock is disabled before switching
the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails,
the runtime suspend is aborted but the clock remains disabled, causing
a system crash when the hardware is subsequently accessed.
Fix this by switching the pinctrl state before disabling the clock so
that a pinctrl failure leaves the clock enabled and the hardware
accessible.
In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep
if clk_enable() fails to keep the consistent. |
| IBM WebSphere Extreme Scale 8.6.1.0 through 8.6.1.6 's Object Query Language engine resolves attacker-supplied class names via Class.forName() and invokes their constructors with no allow-list at three distinct sinks (SELECT NEW, enum literals, and reflection-based comparators); an authenticated remote attacker who can influence an application-built OQL query string can execute arbitrary constructors on the WAS JVM, and a SELECT DISTINCT variant using planted grid values fires the same gadget post-readObject in a manner that survives JEP-290 serialization filters across grid node boundaries |
| IBM Langflow OSS 1.0.0 through 1.9.6 contains a missing authentication vulnerability in /api/v1/build_public_tmp/ endpoints that allows an unauthenticated attacker to read build event data or cancel jobs using a valid job identifier, resulting in information disclosure and denial of service. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could disclose sensitive information to an authenticated user from the monitoring and event tables. |
| IBM UCD - IBM UrbanCode Deploy 7.3 through 7.3.2.18 and IBM UCD - IBM DevOps Deploy 8.0 through 8.0.1.13, 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 IBM DevOps Deploy could disclose sensitive configurations and secrets to authenticated users in API responses that could be used in further attacks against the system. |
| IBM UCD - IBM DevOps Deploy 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains. |
| IBM WebSphere Extreme Scale 8.6.1.0 through 8.6.1.6 could allow an adjacent attacker to cause a denial of service due to improper validation in the XDF decoder. The application processes deeply nested Protocol Buffers messages and attacker-controlled length prefixes without sufficient bounds checking, which may allow an attacker on the same network to trigger a StackOverflowError or OutOfMemoryError, resulting in a crash of the WebSphere Application Server JVM. |
| IBM InfoSphere Information Server 11.7.0.0 through 11.7.1.6 is affected by an information disclosure vulnerability. |
| IBM Langflow OSS 1.0.0 through 1.10.0 could allow arbitrary code execution due to improper validation of flow nodes with missing or empty component type fields. |
| A flaw was found in the GIF parser of GdkPixbuf’s LZW decoder. When an invalid symbol is encountered during decompression, the decoder sets the reported output size to the full buffer length rather than the actual number of written bytes. This logic error results in uninitialized sections of the buffer being included in the output, potentially leaking arbitrary memory contents in the processed image. |
| A vulnerability was found in PAM. The secret information is stored in memory, where the attacker can trigger the victim program to execute by sending characters to its standard input (stdin). As this occurs, the attacker can train the branch predictor to execute an ROP chain speculatively. This flaw could result in leaked passwords, such as those found in /etc/shadow while performing authentications. |
| A flaw was found in Aardvark-dns, which is vulnerable to a Denial of Service attack due to the serial processing of TCP DNS queries. An attacker can exploit this flaw by keeping a TCP connection open indefinitely, causing the server to become unresponsive and resulting in other DNS queries timing out. This issue prevents legitimate users from accessing DNS services, thereby disrupting normal operations and causing service downtime. |
| Insertion of sensitive information into sent data in the AI Agent job API in Devolutions PowerShell Universal 2026.2.0 allows an authenticated user with AI Agent read access to obtain reusable, potentially higher-privileged authentication tokens via App Tokens serialized in plaintext in job API responses. |
| A flaw was found in the mod_auth_openidc module for Apache httpd. This flaw allows a remote, unauthenticated attacker to trigger a denial of service by sending an empty POST request when the OIDCPreservePost directive is enabled. The server crashes consistently, affecting availability. |
| HCL Traveler for Microsoft Outlook (HTMO) is susceptible to vulnerabilities due to .NET Framework 4.5 being out of service. Since .NET Framework 4.5 has reached end-of-life and no longer receives security updates, it may expose the application to publicly known security weaknesses through vulnerable third-party components. |
