| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: unlist vifs when their netdev is unregistered
mac80211 only removes vifs from the local->interfaces list when
an interface is removed via ieee80211_if_remove(), before it
unregisters the netdev. However, it's possible for a netdev to
be unregistered without going through that: When the netns that
holds the wiphy is destroyed, the wiphy is supposed to move to
the init_ns, but that can run into allocation failures.
Then, mac80211 has an interface listed that doesn't exist, and
will eventually hit
BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()!
...
_cfg80211_unregister_wdev+0x24/0x36a [cfg80211]
cfg80211_unregister_wdev+0x15/0x1d [cfg80211]
ieee80211_remove_interfaces+0x1ff/0x257 [mac80211]
ieee80211_unregister_hw+0x73/0x1d1 [mac80211]
mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim]
Remove the interface from the list in ->ndo_uninit if it's still
around to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogue AP/device, so drop the check and remove any entries matching
the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: only group hidden BSSes with beacon entries
When a probe response for an unknown BSS comes in, __cfg80211_bss_update()
looks for an existing entry with the same BSSID and a hidden (zero-length
or NUL-filled) SSID, and if it finds one it groups them, using the beacon
IEs from the existing entry.
But that could find another entry without a beacon, if it was also from a
probe response (with SSID), so there's a group without beacon elements.
If a beacon with a hidden SSID for that BSSID arrives later,
cfg80211_combine_bsses() goes looking for the probe response entries that
belong to it - i.e. entries with the same BSSID and channel that have no
beacon IEs - and finds those two. They are already grouped with each
other, so it hits its
WARN_ON_ONCE(bss->pub.hidden_beacon_bss)
WARN_ON_ONCE(!list_empty(&bss->hidden_list))
which are there because an entry without beacon elements is not supposed
to be part of a group yet.
Only combine entries when a beacon was already received, ones that are
kept separate will be combined when a beacon arrives. |
| wger is a free, open-source workout and fitness manager. Versions prior to 2.6 have a vulnerability in the authentication/session lifecycle of `wger` where bearer-style API credentials remain valid after a user logs out and after a user changes their password. An attacker who steals a victim’s DRF authtoken (`Authorization: Token ...`) or JWT refresh token can continue to access protected `/api/v2/*` endpoints until the token is manually rotated/deleted (DRF token) or naturally expires (JWT refresh). Version 2.6 contains a patch. |
| A reachable assertion in the illumos bhyve instruction emulator allows a guest to panic the host. When emulating a REP-prefixed MOVS or STOS instruction that accesses guest MMIO, vie_emulate_movs() and vie_emulate_stos() in usr/src/uts/intel/io/vmm/vmm_instruction_emul.c do not clear the VIES_REPEAT status flag on the final iteration. For MMIO regions emulated in the kernel (the local APIC, I/O APIC and HPET), the stale flag causes a VERIFY assertion in vie_advance_pc() to fail, and the host panics. A privileged user within a guest VM can issue a REP MOVS or REP STOS instruction against the local APIC page to cause a denial of service of the host and every other guest running on it. The flaw has existed since 2020 (illumos-gate commit e0c0d44e), and affects any illumos distribution prior to illumos-gate commit 696ecf8d. |
| Apache Tomcat before 6.0.39, 7.x before 7.0.50, and 8.x before 8.0.0-RC10 allows attackers to obtain "Tomcat internals" information by leveraging the presence of an untrusted web application with a context.xml, web.xml, *.jspx, *.tagx, or *.tld XML document containing an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue. |
| named in ISC BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries. |
| Open5GS through 2.8.0 contains a reachable assertion vulnerability in mme_gn_handle_sgsn_context_request() that allows remote unauthenticated attackers to crash the MME via malformed SGSN Address IEs. Attackers sending GTPv1-C traffic from a configured SGSN address with a known UE IMSI or P-TMSI can supply an invalid address length to terminate open5gs-mmed, denying service to all subscribers. |
| Backstage is an open framework for building developer portals. Prior to 1.15.4, the @backstage/plugin-techdocs-node package is affected by techdocs arbitrary file read via mkdocs snippets. Unsafe path resolution in TechDocs source tree handling allows an authenticated user who can register documentation sources to include content from outside the intended documentation boundary. Depending on deployment, this may expose files readable by the build process. This issue is fixed in version 1.15.4. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 6.3.0, fast-jwt createVerifier accepts Infinity for clockTolerance because its option validation checks type and negativity but not finiteness. In validateClaimDateValue, infinite positive and negative modifiers make exp and nbf comparisons always pass, allowing expired or not-yet-active tokens to be accepted. The verifier cache also derives infinite bounds, so entries created under this configuration can remain valid until eviction. Exploitation requires an application administrator or equivalent configuration path to set clockTolerance to Infinity. This issue is fixed in version 6.3.0. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 6.3.4, the fast-jwt createVerifier cache can continue accepting a previously valid, signed JWT after its exp time when caching is enabled and the token has exp but no iat. In src/verifier.js, cacheSet derives the exp cache deadline only when iat is present, so the cache falls back to cacheTTL, and a later cache hit returns the saved payload before verifyToken rechecks expiration. An attacker who can replay the same cached bearer token can extend access until the cache entry expires, but cannot forge a token through this issue. This issue is fixed in version 6.3.4. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup
When the forward output route cannot be used in icmp_route_lookup(),
it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr,
the original packet's source address.
ip_route_input() only returns an error for truly invalid packets. For
unreachable addresses it will succeed and return an input route whose
dst.output is set to ip_rt_bug(). The existing check only rejects
RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned
and later used for output, syzkaller triggering a WARN_ON_ONCE()
in ip_rt_bug() as bellow:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
ip_push_pending_frames+0xfa/0x100
__icmp_send+0x905/0xf10
ip_options_compile+0xc0/0xd0
ip_rcv_finish_core+0x321/0xae0
ip_rcv+0x1de/0x260
__netif_receive_skb_one_core+0x11a/0x130
netif_receive_skb+0x7b/0x260
tun_get_user+0x11bf/0x1c10
------------[ cut here ]------------
Reject input route that is RTN_UNREACHABLE to fix it. The net warning
is only printed for RTN_LOCAL, as RTN_UNREACHABLE is not the result of
a race condition. |
| This CVE ID has been rejected as a duplicate. |
| An XML External Entity (XXE) injection vulnerability in the WiFi-server Spectralight application allows any authenticated user to send malicious requests, leading to arbitrary local file disclosure and partial denial of service. |
| Claude Code validated that a target file path resided within the project working directory at permission-check time, but re-resolved the path at write time without repeating that validation. This time-of-check to time-of-use (TOCTOU) gap allowed an attacker who could write to the workspace to atomically replace a project file with a symlink, causing Claude Code to follow the symlink and write its output to an arbitrary file outside the project sandbox. Exploitation required the ability to win a race condition against the write operation and write access to the shared workspace, enabling a lower-privileged attacker to redirect benign edits to sensitive files (e.g., shell configuration) in a higher-privileged session.
Users on standard Claude Code auto-update have received this fix already. Users performing manual updates are advised to update to the latest version.
Thank you to hackerone.com/c_h4ck_0 for reporting this issue. |
| @fastify/jwt is a JSON Web Token plugin for the Fastify web framework. In versions before 10.2.3, a time span passed to expiresIn, notBefore, or maxAge that the plugin's parser cannot read, such as a compound span, a month unit, an ISO 8601 duration, a decimal comma, or a value with surrounding whitespace, is silently dropped instead of refused. On the signing path this produces a token with no expiration claim that never expires, and on the verification path a configured maxAge stops being enforced, so a token that should be rejected for age is accepted. The issue is fixed in @fastify/jwt 10.2.3, and users should upgrade to 10.2.3 or later. As a workaround, pass these options as a number of seconds, or verify that any time-span string parses to a finite value before relying on it. |
| XML External Entity vulnerability in libexpat 2.2.0 and earlier (Expat XML Parser Library) allows attackers to put the parser in an infinite loop using a malformed external entity definition from an external DTD. |
| Multiple XML external entity (XXE) vulnerabilities in the (1) Dom4JDriver, (2) DomDriver, (3) JDomDriver, (4) JDom2Driver, (5) SjsxpDriver, (6) StandardStaxDriver, and (7) WstxDriver drivers in XStream before 1.4.9 allow remote attackers to read arbitrary files via a crafted XML document. |
| A flaw was found in FasterXML Jackson Databind, where it did not have entity expansion secured properly. This flaw allows vulnerability to XML external entity (XXE) attacks. The highest threat from this vulnerability is data integrity. |
| The WSO2 Identity Server fails to enforce a default expiry time for SMS One-Time Passwords (OTPs) used in multi-factor authentication (MFA). This allows unused OTPs to remain valid indefinitely, presenting an opportunity for malicious actors to conduct brute force attacks by repeatedly guessing the OTP.
The absence of automatic expiration for OTPs grants attackers an unlimited timeframe to attempt guessing the correct code. A successful brute force attack can lead to an MFA bypass, resulting in the unauthorized takeover of a user's account and compromising the security and privacy of both the individual and the system. |
