| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix NULL dereference in tb_remove_work()
There is a slight race between tb_remove_work() and tb_domain_remove()
which leads to dereferencing a NULL tb->root_switch pointer inside
tb_free_unplugged_xdomains():
Thread A Thread B
tb_remove_work()
tb_domain_remove()
mutex_lock(&tb->lock)
tb_stop()
/* doesn't cancel a running callback */
cancel_delayed_work(&tcm->remove_work)
...
tb_switch_remove(tb->root_switch)
tb->root_switch = NULL
mutex_unlock(&tb->lock)
mutex_lock(&tb->lock)
...
/* without checking ->root_switch */
tb_free_unplugged_xdomains(tb->root_switch)
mutex_unlock(&tb->lock)
Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without
holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains()
out of the &tb->lock section and the check for tb->root_switch, in
particular. It states:
For this reason separate removing the XDomain from the topology data
structures (where we need the lock) from unregistering the device from
the bus (where remove callbacks of the drivers are being called).
tb_free_unplugged_xdomains() belongs to the former group of functions
requiring the lock. And it also calls tb_xdomain_remove() which should
only be called with &tb->lock held.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str()
The channel path registry entry associated with a CHPID may be removed
while the subchannel's PMCW still references that CHPID. In this case,
chpid_to_chp() can return NULL, leading to a NULL pointer dereference.
Add the missing NULL check before dereferencing the returned pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mt7530: fix NULL dereference on unbind of MT7531 and MT7621
The core and io supplies are only requested for ID_MT7530: both the
devm_regulator_get() in probe and the regulator_enable() in
mt7530_setup() are guarded by the switch id, but mt7530_remove()
disables them unconditionally. On an MT7621 or an MT7531 both pointers
are still NULL from devm_kzalloc(), so rmmod or a sysfs unbind calls
regulator_disable() on NULL. |
| kin-openapi is a Go project for handling OpenAPI files. From 0.136.0 until 0.143.0, openapi3filter accepts OpenAPI 3.1 array schemas without an items keyword and then dereferences the nil Schema.Items value while decoding application/x-www-form-urlencoded or multipart/form-data request bodies, response headers, and other array parameter surfaces. A remote unauthenticated client can reach an affected operation with a nonempty request or matching response and deterministically trigger a nil-pointer panic during ValidateRequest or ValidateResponse. OpenAPI 3.0 documents are not affected because document validation rejects arrays without items, and JSON request bodies use a different decoder path. This issue is fixed in version 0.143.0. |
| ELFIO through 3.12 contains a NULL pointer dereference vulnerability in relocation_section_accessor get_entry() that allows attackers to crash applications via an unvalidated sh_link index. Attackers can supply a crafted ELF file whose SHT_REL or SHT_RELA section has a dangling sh_link, causing find_hash_section() to dereference null and deny service. |
| Requesting `/{username}/-/repositories` for an individual user instead of an organization made the organization home handler dereference a nil organization and panic. The request needs no authentication and no special configuration. The server answered with an HTTP 500 error and logged a panic for each request; the fix returns 404 for individual users. |
| TLS 1.3 embeds the actual record type as the last non-zero byte of the decrypted payload, optionally followed by zero padding. The code which searches for the inner record type had an off-by-one bug which could be triggered by an invalid frame, leading to an underflow followed by an unconditional NULL pointer dereference, causing a kernel panic.
A remote TLS 1.3 peer can send a specially crafted record to trigger a kernel panic, resulting in a Denial of Service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix handling of AIF enable without AISB
When a guest seeks to register IRQs without a summary bit specified,
ensure that the associated GAITE then stores 0 for the guest AISB
location instead of virt_to_phys(page_address(NULL)). |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: net: Fix fragmented datagram reassembly
fwnet_frag_new() keeps a sorted list of received fragments for a partial
datagram. When a new fragment is adjacent to an existing fragment, the
code checks whether the new fragment also closes the gap to the next or
previous list entry.
Those neighbor lookups currently assume that the current fragment always
has a real next or previous fragment. At a list edge, the next or
previous entry is the list head, not a struct fwnet_fragment_info.
The gap checks also compare against the old edge of the current fragment
instead of the edge after adding the new fragment. As a result, a
fragment that bridges two existing ranges may leave two adjacent ranges
unmerged, so fwnet_pd_is_complete() can miss a complete datagram.
Check for the list head before looking up the neighboring fragment, and
compare the neighbor against the new fragment's far edge when deciding
whether to merge all three ranges.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: guard missing CRUSH type name lookup
Localized read selection can walk a parent bucket whose name exists in
the CRUSH map while its type has no matching entry in type_names.
get_immediate_parent() then dereferences a NULL type_cn and passes an
invalid pointer into strcmp(), causing a null-ptr-deref.
Skip such malformed parent buckets unless both the bucket name and type
name metadata are present. This keeps malformed hierarchy data from
crashing locality lookup and safely falls back to "not local".
[ idryomov: add WARN_ON_ONCE ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: fix double aggregation of flush-marked skbs
Commit 0ab03f353d36 ("net-gro: Fix GRO flush when receiving a GSO
packet.") added a flush check to skb_gro_receive(), but
skb_gro_receive_list() lacks the same validation.
As a result, packets marked with NAPI_GRO_CB(skb)->flush may still be
re-aggregated.
This allows already-GRO'd packets with existing frag_list to be
re-aggregated into a new GRO session, corrupting the frag_list chain
structure. When skb_segment() attempts to unpack these malformed packets,
it encounters invalid state and triggers a kernel panic.
Scenario (Tethering/Device forwarding):
1. Driver: Generated aggregated packet P1 via LRO with frag_list
2. Dev A: Receives aggregated fraglist packet and flush flag set
3. Dev A: Re-enters GRO, skb_gro_receive_list() is called
4. Missing flush check allows re-aggregation despite flush flag
5. Frag_list chain becomes corrupted (loops or dangling refs)
6. Dev B: TX path calls skb_segment(), crashes on corrupted frag_list
Root cause in skb_segment():
The check at line ~4891:
if (hsize <= 0 && i >= nfrags && skb_headlen(list_skb) &&
(skb_headlen(list_skb) == len || sg)) {
When frag_list is corrupted by double aggregation, when list_skb is
a NULL pointer from skb->next, skb_headlen(list_skb) dereference
NULL/corrupted pointers occurs.
Call Trace:
skb_headlen(NULL skb)
skb_segment
tcp_gso_segment
tcp4_gso_segment
inet_gso_segment
skb_mac_gso_segment
__skb_gso_segment
skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
qdisc_restart
__qdisc_run
qdisc_run
net_tx_action
Fix: Add NAPI_GRO_CB(skb)->flush validation to the early-return check in
skb_gro_receive_list(), matching the defensive programming pattern of
skb_gro_receive(). |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: cros_ec: Delay dev_set_drvdata() until probe success
If ec_device_probe() fails, cros_ec_class_release releases memory for the
cros_ec_dev structure. However, because the drvdata was already set,
sub-drivers like cros_ec_typec can still retrieve the stale pointer via the
platform device. This leads to a use-after-free when cros_ec_typec attempts
to access &typec->ec->ec->dev on a device that has already been released.
Move dev_set_drvdata() to ensure that the pointer is only made available
once all initialization steps have succeeded.
sysfs: cannot create duplicate filename '/class/chromeos/cros_ec'
Call trace:
sysfs_do_create_link_sd+0x94/0xdc
sysfs_create_link+0x30/0x44
device_add_class_symlinks+0x90/0x13c
device_add+0xf0/0x50c
ec_device_probe+0x150/0x4f0
platform_probe+0xa0/0xe0
...
BUG: KASAN: invalid-access in __memcpy+0x44/0x230
Write at addr f5ffff809e2d33ac by task kworker/u32:5/125
Pointer tag: [f5], memory tag: [fe]
Tainted : [W]=WARN, [O]=OOT_MODULE
Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__memcpy+0x44/0x230
cros_ec_check_features+0x60/0xcc [cros_ec_proto]
cros_typec_probe+0xe8/0x6e0 [cros_ec_typec]
platform_probe+0xa0/0xe0 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate option length before reading conf opt value
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds read has already executed.
An existing post-hoc length check keeps the garbage value from being
consumed, so this is not a data leak in the current control flow. It
is still a validate-after-use ordering bug: up to 4 bytes are read
past the end of the buffer before it is known to contain them, and it
is fragile to future changes in the callers.
Fix it at the source. Pass the end of the buffer into
l2cap_get_conf_opt() and refuse to touch opt->val unless the full
option (header + value) fits. Each caller computes an end pointer
once before the loop and checks the return value directly instead of
inferring the error from a negative length. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
When the TLC notification disables AMSDU for a TID, the MLD driver sets
max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in
iwl_mld_tx_tso_segment() checks for zero but not for this sentinel,
allowing it to reach the num_subframes calculation:
num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad)
= (1 + 2) / (1534 + 2) = 0
This zero propagates to iwl_tx_tso_segment() which sets:
gso_size = num_subframes * mss = 0
Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny
segments from a single GSO skb. This floods the TX ring with ~1024
micro-frames (the rest are purged), creating a massive burst of TX
completion events that can lead to memory corruption and a subsequent
use-after-free in TCP's retransmit queue (refcount underflow in
tcp_shifted_skb, NULL deref in tcp_rack_detect_loss).
The MVM driver is immune because it checks mvmsta->amsdu_enabled before
reaching the num_subframes calculation. The MLD driver has no equivalent
bitmap check and relies solely on max_tid_amsdu_len, which does not
catch the sentinel value.
Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the
existing check and falling back to non-AMSDU TSO segmentation. Also add
a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth
to catch any future code paths that produce zero through a different
mechanism. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix locking in .getsockopt
Mirror iucv_sock_setsockopt() and wrap the whole switch in
lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock
becomes redundant and is removed.
Any AF_IUCV HIPER user can potentially crash the kernel by racing
recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences
iucv->hs_dev->mtu after iucv_sock_close() (called from the racing
recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference
oops. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
The change_work was introduced to send device change notifications
from DPLL device callbacks without deadlocking on dpll_lock, since
the callbacks are already invoked under that lock. Now that
__dpll_device_change_ntf() is exported for callers that already
hold dpll_lock, use it directly and remove the change_work
infrastructure entirely.
This eliminates a race condition where change_work could be
re-scheduled after cancel_work_sync() during device teardown,
potentially causing the handler to dereference a freed or NULL
dpll_dev pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release layout stid on setlease failure
nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via
idr_alloc_cyclic() under cl_lock before returning to
nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then
fails, the error path frees the layout stateid directly with
kmem_cache_free() without ever calling idr_remove(), leaving the
IDR slot pointing at freed slab memory. Any subsequent IDR walker
(states_show, client teardown) dereferences the dangling pointer.
The correct teardown for an IDR-published stid is nfs4_put_stid(),
which removes the IDR slot under cl_lock, dispatches sc_free
(nfsd4_free_layout_stateid) to release ls->ls_file via
nfsd4_close_layout(), and drops the nfs4_file reference in its
tail.
A second issue blocks that switch: nfsd4_free_layout_stateid()
unconditionally inspects ls->ls_fence_work via
delayed_work_pending() under ls_lock, but
INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only
after the setlease call. On the setlease-failure path the
destructor would touch an uninitialized delayed_work.
nfsd4_alloc_layout_stateid()
nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */
nfsd4_layout_setlease() /* fails */
nfs4_put_stid()
nfsd4_free_layout_stateid()
delayed_work_pending(&ls->ls_fence_work) /* needs INIT */
nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */
put_nfs4_file()
Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK
initialization above the nfsd4_layout_setlease() call, and replace
the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup
with a single nfs4_put_stid(stp). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/flexfiles: reject zero filehandle version count
ff_layout_alloc_lseg() decodes the filehandle-version array count
from the flexfiles layout body. The value is used as the count for
kzalloc_objs(), and the current code only rejects NULL.
A zero count yields ZERO_SIZE_PTR, which can be stored in
dss_info->fh_versions even though later flexfiles paths assume that at
least one filehandle version exists.
Reject fh_count == 0 before the allocation, matching the existing zero
version_count validation in the flexfiles GETDEVICEINFO parser.
A QEMU/KASAN run with a malformed flexfiles layout hit:
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750
ff_layout_encode_layoutreturn+0x683/0x970
nfs4_xdr_enc_layoutreturn+0x278/0x3a0
Kernel panic - not syncing: Fatal exception
The patched kernel rejects the malformed layout without KASAN/oops/panic,
and a valid fh_count=1 regression still opens, reads, and unmounts cleanly. |
