Export limit exceeded: 417674 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46018 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74624 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: defer invalid log until after unlock TCP and SCTP conntrack paths can emit invalid-packet logs while ct->lock is still held. When invalid logging is routed to nfnetlink_log and conntrack export is enabled, the log path can re-enter conntrack netlink glue and dump the same conntrack again. Protocol attribute dumping may take ct->lock, so logging while holding that lock can deadlock. Defer the TCP invalid logs by storing only the minimal log context while ct->lock is held and emitting the log after unlocking. Also make the TCP timeout-lowering invalid path return whether a log is needed, then emit that log after unlocking. Do the same for the SCTP invalid state-transition log that can be reached while ct->lock is held. Add a lockdep assertion to nf_ct_l4proto_log_invalid() so future callers that log invalid conntracks while holding ct->lock are caught outside TCP and SCTP as well. | ||||
| CVE-2026-74609 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: read le->link under the node lock in tipc_node_link_down() tipc_node_link_down() caches the link pointer before taking n->lock: struct tipc_link *l = le->link; /* unlocked */ if (!l) return; tipc_node_write_lock(n); if (!tipc_link_is_establishing(l)) { /* deref l */ ... tipc_link_reset(l); /* write into l */ if (delete) { kfree(l); le->link = NULL; The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it: - CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock; - CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l). The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B frees it: a use-after-free read in tipc_link_is_establishing(), and a use-after-free write via tipc_link_reset() on the establishing branch. The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6: BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285) Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0 tipc_link_is_establishing (net/tipc/link.c:285) tipc_node_link_down (net/tipc/node.c:1076) tipc_node_timeout (net/tipc/node.c:843) Allocated by task 9549: tipc_link_create (net/tipc/link.c:490) tipc_node_check_dest (net/tipc/node.c:1279) tipc_disc_rcv (net/tipc/discover.c:252) tipc_udp_recv (net/tipc/udp_media.c:389) Freed by task 9549: tipc_node_link_down (net/tipc/node.c:1084) tipc_node_delete_links (net/tipc/node.c:1320) bearer_disable (net/tipc/bearer.c:414) __tipc_nl_bearer_disable (net/tipc/bearer.c:992) Move the le->link read inside tipc_node_write_lock(), so it is serialised against the kfree() in the delete path. A racing teardown now either has not run yet, and we see a valid link, or has already run, and we see NULL. | ||||
| CVE-2026-74608 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free in cifs_try_adding_channels() cifs_try_adding_channels() takes a temporary reference to an interface before dropping iface_lock. If cifs_ses_add_channel() fails, it drops that reference and then increments iface->weight_fulfilled. A concurrent interface list refresh can remove the list reference while channel creation is in progress. In that case, the failure-path kref_put() releases the last reference and frees iface. Updating weight_fulfilled afterward then accesses freed memory. Increment weight_fulfilled before dropping the temporary reference, keeping iface alive for the final access. | ||||
| CVE-2026-74604 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "thermal/drivers/hwmon: Cleanup coding style a bit" Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style a bit") that introduced a use-after-free into the error path of thermal_add_hwmon_sysfs() by removing a valid check from it. | ||||
| CVE-2026-74586 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: clear new_transport when removing a peer sctp_process_asconf_param() stores a newly added peer transport in asoc->new_transport. After all parameters in the ASCONF chunk have been processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the new transport. An authenticated ASCONF from a remote SCTP peer can add a transport and remove it again with a wildcard DEL-IP parameter in the same chunk. The wildcard deletion preserves the transport on which the ASCONF arrived, but removes the newly added transport through sctp_assoc_del_nonprimary_peers(). The removal does not clear asoc->new_transport, leaving it pointing to the removed transport. sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points to the removed transport without holding a transport reference. During local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on control_chunk_list. After the transport is freed by RCU, a successful ASCONF_ACK for the replacement address releases the queued HEARTBEAT and sctp_outq_select_transport() reads the freed transport's state. The issue was found during a static audit of SCTP objects. With an authenticated peer, the reproducer triggered the same KASAN report in 2 of 2 unpatched runs on a KASAN-enabled netdev/main kernel: BUG: KASAN: slab-use-after-free in sctp_outq_select_transport Read of size 4 at addr ffff88800b9bd95c by task python3/197 Call Trace: sctp_outq_select_transport+0x549/0x8b0 [sctp] sctp_outq_flush+0x306/0x2c60 [sctp] sctp_transport_immediate_rtx+0xaf/0x260 [sctp] sctp_process_asconf_ack+0xa48/0xf70 [sctp] Allocated by task 197: sctp_transport_new+0x68/0x650 [sctp] sctp_assoc_add_peer+0x258/0x12a0 [sctp] sctp_process_asconf+0x5e9/0x1090 [sctp] Last potentially related work creation: __call_rcu_common.constprop.0+0x77/0xb70 sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp] sctp_process_asconf+0xd9c/0x1090 [sctp] The first invalid access was a four-byte read of transport->state at net/sctp/outqueue.c:833. The same reproducer completed the full authenticated ASCONF and local-address replacement sequence with this change without a KASAN report or oops. Clear new_transport when its peer is removed, before it can be used to create the HEARTBEAT. | ||||
| CVE-2026-74574 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open() The failed_dev_add and failed_dev_name paths drop the file-device reference while wq->wq_lock is still held. If put_device(fdev) drops the last reference, idxd_file_dev_release() runs synchronously and tries to take wq->wq_lock again, deadlocking. Those paths also fall through into the later ctx cleanup labels even though idxd_file_dev_release() owns that cleanup and frees ctx. This can make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context. Move idxd_wq_get() before file-device setup can fail, since the release callback always calls idxd_wq_put(). Then unlock wq->wq_lock before put_device(fdev) and return directly from the file-device setup failure path, leaving ctx cleanup to the release callback. | ||||
| CVE-2026-74572 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix deadlock between metadata writeback and transaction commit When writing out metadata extent buffers in a zoned filesystem, btree_writepages() holds fs_info->zoned_meta_io_lock across the whole writeback loop, including the call to btrfs_check_meta_write_pointer() -> check_bg_is_active(). For the tree-log block group, check_bg_is_active() may fail to activate the zone and fall back to btrfs_zone_finish_one_bg() to free an active zone. That path waits for the running transaction to commit while still holding zoned_meta_io_lock, but the committer needs that same lock to write out the tree extents, so the two tasks deadlock: Task A (kworker, metadata writeback) Task B (fsstress, transaction commit) ------------------------------------ ------------------------------------- wb_workfn() btrfs_commit_transaction(T) btree_writepages() btrfs_write_and_wait_transaction() btrfs_zoned_meta_io_lock() btrfs_write_marked_extents() btrfs_check_meta_write_pointer() btree_writepages() check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock() btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock, btrfs_zone_finish() held by Task A> do_zone_finish() btrfs_inc_block_group_ro() btrfs_wait_for_commit() <blocks waiting for commit of transaction T, done by Task B> The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock around do_zone_finish() for this exact reason. Do the same in the tree-log branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire it afterwards. The lock only protects fs_info->active_{meta,system}_bg, which this branch does not touch, and ctx->zoned_bg keeps a reference to the block group across the unlock, so nothing is lost while the lock is dropped. This hang occasionally reproduces with fstests generic/475 on a zoned btrfs filesystem. | ||||
| CVE-2026-74568 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Fix race between LPI release and re-registration Fix a potential race between decrementing an LPI's reference count and evicting that structure from the LPI xarray. LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa). When the reference count of an LPI structure drops to zero, vgic_release_lpi_locked() removes the structure from the xarray and frees it under the xarray lock. However, the release of an LPI can race with a concurrent LPI re-registration with the same INTID via vgic_add_lpi() on another CPU, since the reference count drop and the xarray eviction are not performed in a single atomic step. This can happen e.g. if the guest issues a DISCARD while the LPI is still referenced from a vCPU's active-pending list (ap_list), and the same INTID is re-mapped via MAPTI. Particularly, vgic_release_lpi_locked() is called from two distinct paths: direct release via vgic_put_irq(), and deferred release via vgic_release_deleted_lpis(). During direct release, the issue can result in deleting a newly registered LPI from the xarray: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq() __vgic_put_irq() refcount_dec_and_test() vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(old_irq) == false new IRQ inserted --> __xa_store(.., intid, ..) xa_unlock_irqrestore() xa_lock_irqsave(); vgic_release_lpi_locked() __xa_erase(.., irq->intid) <-- BUG: new IRQ is erased kfree_rcu(old_irq) During the deferred release path, the old IRQ can be leaked: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq_norelease() __vgic_put_irq() refcount_dec_and_test() irq->pending_release = true vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(oldirq) == false BUG: old IRQ overwritten --> __xa_store(.., intid, ..) xa_unlock_irqrestore() vgic_release_deleted_lpis() xa_lock_irqsave() xa_for_each() { .. } <-- old IRQ with pending_release = true is gone, so it cannot be released To fix the direct release path, move the reference count drop inside the xarray lock, making sure that vgic_add_lpi() never encounters the to-be-released LPI. In the deferred release path, the refcount drop must happen under a raw spinlock, so the xarray lock cannot be grabbed, and the same solution does not work. Instead, update vgic_add_lpi(), so that if it evicts an LPI from the xarray, it takes on the responsibility of freeing it. Consequently, an LPI may now be freed concurrently after a deferred release drops the refcount, so accessing the pending_release field is no longer safe from use-after-free. Delete all uses of the flag, and update vgic_release_deleted_lpis() to identify orphaned LPIs purely based on their refcount. | ||||
| CVE-2026-74548 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix UAF of txrx_stats in nv_remove nv_remove() frees the per-CPU txrx_stats before unregister_netdev(). Until unregister completes, ndo_get_stats64, the NAPI/xmit data path, and nv_close()/drain may still access txrx_stats, leading to a use-after-free. Free the stats only after unregister_netdev(). | ||||
| CVE-2026-74535 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid deadlocks in iso_sock_timeout iso_sock_timeout() takes lock_sock, so sync disabling the timer while holding that lock may deadlock. iso_sock_timeout() may also run concurrently with iso_conn_del(), which leads to UAF [Task 1] [Task hdev->workqueue] iso_sock_timeout iso_conn_del iso_conn_hold_unless_zero iso_chan_del `------------> iso_conn_put caller frees hcon iso_conn_put iso_conn_free conn->hcon->iso_data = NULL; /* UAF */ Fix the deadlock by removing the disable from the lock_sock sections. Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn which may need to be freed in lock_sock section. Convert some of the clear_timer to disable_timer. | ||||
| CVE-2026-74523 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: qede: sync udp_tunnel ports outside qede_lock in the recovery path A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports configured wedges the rtnetlink control plane of the whole machine: NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms [qede_tx_timeout:586(ens6f1)]TX timeout on queue 2! [qede_recovery_handler:2665(ens6f0)]Starting a recovery process The recovery path deadlocks on the driver's own mutex: qede_sp_task rtnl_lock() mutex_lock(&edev->qede_lock) <- taken qede_recovery_handler qede_load udp_tunnel_nic_reset_ntf __udp_tunnel_nic_device_sync info->sync_table == qede_udp_tunnel_sync mutex_lock(&edev->qede_lock) <- same task: deadlock The mutex is not recursive, so the kworker blocks on itself with rtnl_lock held, and neither lock is ever released. Every task that calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6 addrconf, sshd) blocks forever while the node still answers ping. In a vmcore from an affected production node rtnl_mutex.owner decodes to the very kworker blocked at the innermost mutex_lock() above. Re-sync the tunnel ports from qede_sp_task() after the internal lock is dropped, still under rtnl_lock as the udp_tunnel API requires. This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf() under rtnl without the internal lock. qede_recovery_handler() now returns whether it has successfully reloaded an open device, and the caller re-syncs the ports only in that case. This keeps the old gating exactly: a device that was down or a failed recovery returns false, as those paths never reached the udp_tunnel_nic_reset_ntf() call before either. This was the only user of the qede_lock()/qede_unlock() helpers, so remove them. | ||||
| CVE-2026-74512 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix potential use-after-free in audit_del_rule() `audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()` before unlinking the rule from RCU-visible filter lists and waiting for a grace period. Concurrent readers in `audit_filter()` and `audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify mark can be freed on an independent lifetime path. This creates a use-after-free window during rule deletion. Fix this by unlinking the rule from the RCU-visible lists and invoking `synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other rule removal helpers). This ensures that all existing RCU readers have exited the critical section before any underlying resources are destroyed. | ||||
| CVE-2026-74510 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix UAF in pair command cancellation The pairing completion and authentication failure callbacks look up the pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The lookup returned a command that was still linked on the shared pending list, without keeping mgmt_pending_lock held for the later dereference and removal. A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the same pending command before the callback uses it. The reverse race is also possible when cancel_pair_device() gets a command from pending_find() and a callback removes it before the cancel path dereferences it. This can lead to a use-after-free and a second list_del(). Make the pairing lookup helpers transfer ownership of the pending command by removing it from hdev->mgmt_pending while holding mgmt_pending_lock. The callbacks and cancel path then complete the command and free it directly, so racing paths cannot find or free the same command again. Take a temporary hci_conn reference in cancel_pair_device() because the command completion drops the reference stored in the pending command. | ||||
| CVE-2026-74507 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: validate numbered report payloads When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. | ||||
| CVE-2026-74496 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fou: Fix use-after-free in fou_create() fou_create() publishes struct fou through sk_user_data before adding the new FOU port to the per-netns list. If fou_add_to_port_list() fails, the error path frees fou while it is still reachable through sk_user_data. A concurrent receive can then dereference the freed object in fou_from_sock(). This ordering issue was previously noted in the linked discussion. The failure is reachable when local port 0 is requested. Each socket binds to a different ephemeral port, but fou_cfg_cmp() compares the requested port 0 and reports -EALREADY once an entry already exists. Release the tunnel socket before freeing fou so sk_user_data is cleared first, and defer reclamation with kfree_rcu() to protect concurrent RCU readers. This matches the lifetime handling in fou_release(). | ||||
| CVE-2026-74493 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket use-after-free during link group termination __smc_lgr_terminate() drops conns_lock after finding a connection in lgr->conns_all, but before taking a reference on its socket. The connection is embedded in the socket, and its registration reference protects it only while the connection remains in the tree. A concurrent close can unregister the connection and drop that reference, freeing the socket before the termination worker reaches sock_hold(). The race is reachable when close overlaps link group termination. Local stress testing reproduced the use-after-free and KASAN reported: BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc] Write of size 4 by task kworker/3:3 Workqueue: events smc_lgr_terminate_work [smc] __smc_lgr_terminate.part.0 [smc] The socket was allocated by smc_create(), freed through slab_free_after_rcu_debug(), and was followed by: refcount_t: addition on 0; use-after-free. __smc_lgr_terminate.part.0 [smc] Take the socket reference while conns_lock still protects the tree entry. The unregister path then cannot drop the last reference until termination has finished using the socket. | ||||
| CVE-2026-74492 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: do not update comments from kernel-side hash adds mtype_resize() copies comment pointers with memcpy(), not the comment objects themselves. During the window after an entry has been copied but before the table swap and backlog replay, the old table is still published for packet-side updates while the replacement-table entry already holds the same ip_set_comment_rcu pointer. If xt_SET --add-set ... --exist hits that old entry in this window, mtype_add() calls ip_set_init_comment() even though packet-side adds carry no comment payload. That call frees the shared comment through the old entry, so the replacement-table entry now holds a stale pointer. When the queued add is replayed on the new table, mtype_add() calls ip_set_init_comment() again and strlen() dereferences the stale pointer. Fix this in mtype_add() by skipping ip_set_init_comment() when ext->target marks a packet-side add. Userspace adds still update comments, while packet-side adds can no longer free comment storage shared with a resize copy. | ||||
| CVE-2026-74490 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: avoid use-after-free in poll trace queue dumps TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most queue-dump callsites already serialize that walk under the socket lock or sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(..., TIPC_DUMP_ALL, ...) without holding either lock. That lets the poll trace path reach tipc_list_dump() and backlog head/tail dumping while another context dequeues and frees an skb, leaving the trace helper dereferencing a stale queue entry. Stop the unlocked poll trace site from requesting queue dumps. Other queue dump trace callsites keep their existing output under the locking they already provide, while poll still emits the event itself without walking live queue members from an unlocked context. | ||||
| CVE-2026-74489 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix tid_tx use-after-free on BA session stop ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping sta->lock: ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */ ... spin_unlock_bh(&sta->lock); if (start_txq) ieee80211_agg_start_txq(sta, tid, false); if (send_delba) ieee80211_send_delba(..., tid_tx->ndp); That read is not covered by an RCU read-side critical section, and it runs in preemptible process context: both callers hold the wiphy mutex, reaching it either from the ieee80211_ba_session_work() wiphy work or from ieee80211_sta_tear_down_BA_sessions() during station teardown. Softirqs can run in that window too, both from the local_bh_enable() that ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU callback can free tid_tx before the read. Driving the function from a test module with the grace period forced into that window, KASAN reports the read, and the free arrives on the ordinary RCU softirq path: BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400 Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10 [...] Freed by task 57: __kasan_slab_free+0x47/0x70 __rcu_free_sheaf_prepare+0x70/0x250 rcu_free_sheaf_nobarn+0x18/0x40 rcu_core+0x426/0x1310 handle_softirqs+0x144/0x590 __irq_exit_rcu+0xea/0x150 irq_exit_rcu+0x9/0x20 sysvec_apic_timer_interrupt+0x6b/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 send_delba is only set when tx_stop is set, which happens for AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown - session idle timeout, PTK rekey, suspend, HW reconfig - and not from a peer's DELBA. Read ndp into a local before the session is freed, while sta->lock is still held. tid_tx->ndp has a single writer, in ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here: both paths are serialised by the wiphy mutex, and the session is already marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only tid_tx dereference left after ieee80211_remove_tid_tx() in this function. [move/change the comment a bit to be more general not just on ndp, initialize ndp directly] | ||||
| CVE-2026-74481 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_reporting: use system_freezable_wq to fix UAF during suspend During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like virtio_balloon reset their underlying virtio devices and delete their virtqueues via vdev->config->del_vqs(). However, page reporting work (page_reporting_process) was scheduled on the global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM freezer skips it, leaving page_reporting_process active during suspend. If pages are freed into the buddy allocator while suspending (for example, when core MM invokes the balloon shrinker during S4 hibernation image saving), page reporting triggers virtballoon_free_page_report() on deleted virtqueues, resulting in a Use-After-Free / General Protection Fault: [ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI [ 196.825967] Workqueue: events page_reporting_process [ 196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring] [ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon] [ 196.946943] page_reporting_process+0x370/0x4f0 Fix this by switching page reporting work to system_freezable_wq. This ensures that the PM freezer pauses page_reporting_process before device drivers destroy their reporting virtqueues. Because the reporting worker is frozen, memory reclamation/freeing (e.g. via shrinker execution) can safely return pages to MM during freeze without triggering unfrozen reporting work on deleted virtqueues. This aligns with the driver's existing design. The comment in virtballoon_freeze() states: /* * The workqueue is already frozen by the PM core before this * function is called. */ Testing: I have verified these fixes using Google’s virtualization infrastructure by running continuous suspend/resume iterations (40+ cycles) while churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60% --timeout 1`) to constantly create free pages for the buddy allocator. We also set the `page_reporting_order` parameter to 0 to make the page reporting worker highly sensitive, forcing it to pick up any 4K free pages. This confirmed that the UAF crashes are no longer reproducible. | ||||