| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Widen cache_clean_lock over the whole L2TCACTL sequence
v3d_clean_caches() and v3d_flush_l2t() both write the single L2TCACTL
register and poll its status bits. The mutex cache_clean_lock exists to
serialize them, but v3d_clean_caches() only took the lock around its final
FLM_CLEAN write.
These functions run concurrently: v3d_flush_l2t() is issued from the
BIN/RENDER/CSD invalidate path while v3d_clean_caches() runs from the
CACHE_CLEAN queue, and each queue's scheduler uses its own ordered
workqueue, so their run_job callbacks execute in parallel.
Because clean locked only its final write, a concurrent flush can write
L2TCACTL during clean's unlocked phase. Both use non read-modify-write
writes to the one register, so whichever lands last wins: clean's TMUWCF
write can land on the flush's in-flight L2TFLS invalidate, triggering the
GFXH-1897 hazard of writing L2TCACTL while a flush is pending.
Hold cache_clean_lock across the entire L2TCACTL access sequence so it
is fully mutually exclusive with v3d_flush_l2t(), which already takes the
lock around its own write. |
| ImageMagick before 7.1.2-35 contains a null pointer dereference vulnerability that allows attackers to crash the process by using the -subimage option on a single-image list. Attackers can supply input producing an image list with only one image while -subimage is applied, causing a denial of service. |
| Joomla Extension - joomlatools.com - Local file read through remote document links in DOCman extension < 6.2.2 - Remote document links accepted the file:// scheme, allowing users with permission to create or edit documents to download arbitrary local files from the server, such as the Joomla configuration file. |
| A weakness has been identified in PowerJob up to 5.1.7. This affects the function CustomHttpServletRequestWrapper of the file powerjob-server/powerjob-server-starter/src/main/java/tech/powerjob/server/config/CachingRequestBodyFilter.java of the component CachingRequestBodyFilter. Executing a manipulation can lead to denial of service. It is possible to launch the attack remotely. |
| A vulnerability was detected in DrayTek Vigor2960 up to 1.5.1.6. Affected by this issue is the function json_load_lock of the file /cgi-bin/mainfunction.cgi of the component Jsonstatus. The manipulation of the argument usefile results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 1.5.1.7 can resolve this issue. It is advisable to upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| @fastify/middie is the middleware engine that adds Express and Connect style middleware support to Fastify. In versions 8.3.0 through 9.3.6, the internal helper that normalizes a path-scoped middleware's mount path only handles string inputs, but the use method also accepts an array of mount paths and passes it through unchanged, so the normalization silently does nothing. As a result, a trailing slash on an array element survives into the generated route-matching regular expression, and an element that is exactly the root path, meaning a catch-all mount, is dropped entirely. Requests to subroutes of the affected mount paths then skip the path-scoped middleware, such as authentication, authorization, or rate limiting, while Fastify's router still dispatches them to the handler, allowing an unauthenticated client to reach protected routes. Applications are affected when they mount middleware on an array of paths in which an element ends with a slash, including one introduced by a plugin prefix that ends with a slash, or is exactly the root path. The issue is fixed in @fastify/middie 9.3.7, and users should upgrade to 9.3.7 or later. As a workaround, enforce authorization in a Fastify hook such as preHandler that runs after routing, and avoid array mount paths with a trailing slash element for security relevant middleware. |
| In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the edit_timeline capability could store attacker-controlled Search Processing Language (SPL) in a legacy investigation timeline entry. Another user that holds a role with the manage_all_investigations capability could later open the investigation and select Run Search from the timeline. Splunk Enterprise Security could then run the SPL stored by the first user using the permissions of the user who selected Run Search. The SPL stored by the first user could access data or perform actions available to the user who selected Run Search.
The vulnerability is possible because Splunk Enterprise Security does not treat stored investigation search content as a literal search before building the Search page link.
For more information see Capability reference for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.3/installation/capability-reference-for-splunk-enterprise-security) and Add details to an investigation in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-7/user-guide/7.3/investigations/add-details-to-an-investigation-in-splunk-enterprise-security) in the Splunk documentation. |
| In Splunk SOAR versions below 8.8.0, a user that holds a role with the Apps edit permission could cause Splunk SOAR to execute arbitrary code on the host when the user validates an installed app.
The vulnerability is possible because the app validation workflow does not isolate untrusted code from the trusted environment. |
| In Splunk SOAR versions below 8.8.0, an authenticated user with permission to edit and run playbooks could read or overwrite persisted data for playbook runs outside the authorized label, or ownership scope for that user. The affected data can include playbook inputs, prompt and block results, outputs, and secrets that playbooks save in run data. Overwriting the data could corrupt results that paused, scheduled, or parent playbook runs later use.
The vulnerability is possible because the playbook automation APIs do not bind data operations to the active playbook run. |
| Mattermost versions 11.7.x <= 11.7.11, 11.10.x <= 11.10.2, 11.11.x <= 11.11.1 fail to bound the number of records a single GraphQL request may hydrate which allows an authenticated user to exhaust server memory and cause a denial of service via a small query that repeats the runs field under many aliases. Mattermost Advisory ID: MMSA-2026-00767 |
| Improper neutralization of special elements in data query logic (Cypher injection) in the fulltext and vector index query generator of the sharded property database in Neo4j Enterprise Edition 2026.07.0 before 2026.10.0 allows an authenticated user holding ACCESS, CREATE INDEX and NAME MANAGEMENT privileges to inject Cypher that is accepted for execution on a property shard, in the session of any user who later queries the index, via a crafted index name containing a single quote. The impact is bounded by the privileges of the querying user. |
| Mattermost Plugins versions <=12.-1 11.11.7 11.2.10 11.1.11.0 fail to enforce the GitLab project permission check for confidential issues when the project is publicly visible which allows an authenticated user with no GitLab membership in the project to obtain the contents of confidential issues, including title, description, author, and URL via subscribing a channel to the parent public GitLab group with the confidential_issues feature and waiting for a confidential issue webhook event. Mattermost Advisory ID: MMSA-2026-00738 |
| Mattermost Plugins versions <=12.-1 11.0.11 11.11.7 11.2.10.0 fail to verify that the caller can post in a run's channel when executing a checklist slash command which allows an authenticated run participant to post arbitrary messages into a private channel they are not a member of via the checklist item run endpoint. Mattermost Advisory ID: MMSA-2026-00730 |
| Mattermost Plugins versions <=12.-1 11.0.11 11.11.7 11.2.10.0 fail to check for a nil result after decoding the HTTP request body which allows an authenticated user to crash the Zoom plugin process, causing denial of service, via sending a JSON null body to the plugin's action endpoints. Mattermost Advisory ID: MMSA-2026-00722 |
| HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the experimental CRAM v4 XPACK and XRLE decoders cache expanded block pointers at indexes beyond the 512-element slice->block_by_id array. An array index partially controlled by data in the input file first causes an out-of-bounds read to determine whether a block is cached; a null value then causes allocation of a block and an out-of-bounds pointer write to the same element. The invalid read may crash the process, while the write may corrupt heap state and could permit arbitrary code execution. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: do not let chattr change the casefold flag
chattr +F or -F on an overlay directory can make the directory, or the
whole mount, unusable. Lookups of the directory, and lookups in it, then
fail. From code inspection, the caller only needs to own the directory.
The upper filesystem must support casefolding: ext4 or f2fs with the
casefold feature, or tmpfs with the casefold option.
chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a
directory. The flag enables casefolding (case-insensitive name lookup)
for the directory. All directories of an overlay must match the casefold
state that was recorded at mount time, and ovl_lookup_single() enforces
this:
- A lookup in a directory that does not match fails with -ESTALE.
- A lookup of the directory itself fails with -EREMOTE.
ovl_fileattr_set() copies the directory up, which creates it in the
upper layer if it only existed in a lower layer. It then passes
FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts
the change if the upper directory is empty, regardless of what the
merged directory contains. The merged directory is the one that the user
sees, with the names from the upper and the lower directories.
After the change the upper directory no longer matches the mount. If the
directory is the root of the overlay, the whole mount is affected.
The flag can also change without chattr +F or -F. chattr reads all flags
of a directory, changes one and writes all of them back. For a directory
that only exists in a lower layer, overlayfs reads the flags from the
lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL
on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs
compares with the mount. So its directories count as not casefolded.
With a lower layer on such an xfs and an upper layer on ext4 with the
casefold feature, chattr +A on a lower-only directory therefore sets
FS_CASEFOLD_FL on the new, empty upper directory.
Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an
overlay directory whose upper directory was empty. Afterwards lookups
below it failed with ESTALE, and lookups of the directory itself failed
with EREMOTE. The chattr +A case was seen once, on a kernel with an
earlier form of this patch that still passed the caller's flag on:
lookups of the directory failed with EREMOTE.
Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that
can change the flag, asks for a casefold flag on a directory that does
not agree with the casefold state of the mount. This also refuses the
chattr +A case above.
[amir: check the flag against the casefold state of the mount instead of
reading back the flags] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory-tiers: unregister empty tiers outside memory_tier_lock
When offlining a node's last memory empties its tier,
clear_node_memory_tier() calls device_unregister() while holding
memory_tier_lock. A concurrent sysfs read can hold a kernfs active
reference and block in nodelist_show() on that mutex. device_unregister()
then waits in kernfs_drain() for the read to finish and release its active
reference, while the reader waits for the offlining task to release the
mutex.
Return the node's former tier from clear_node_memory_tier(), making the
helper more similar to set_node_memory_tier(), which also returns a
memory_tier pointer. Let the caller unlink an empty tier under
memory_tier_lock before rebuilding demotion targets, then unregister its
device after dropping the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/cma: don't release CMA pages still in use
When a driver calls dma_free_contiguous() before quiescing DMA, the
page might still have a reference from the device.
put_page_testzero() there returns false, WARN fires, but the code proceeds
to free_contig_frozen_range() putting a live page onto buddy and clearing
the bitmap. A subsequent allocation can hand the same PFN to a new
owner while the original holder still references it.
A concurrent put_page() that drops the last reference between the
testzero loop and free_contig_frozen_range() can double-queue the page
via page->lru, corrupting buddy lists.
Avoid the corruption by not freeing a CMA region if any of the
pages inside are still in use.
Make it explicit in the warning that the driver allowed a leak.
While at it, use page_ref_freeze() to make the semantics clearer and
switch to pr_warn_ratelimited().
[ david: use page_ref_freeze() + pr_warn_ratelimited() ] |
| In the Linux kernel, the following vulnerability has been resolved:
can: replace ARPHRD_CAN type checks with can_get_ml_priv()
Commit 4e096a18867a ("net: introduce CAN specific pointer in the struct
net_device") introduced an explicit way to assign the midlayer private
pointer (dev->ml_priv) to named users like ML_PRIV_CAN. A valid pointer
returned by can_get_ml_priv() therefore identifies a real CAN device.
The referenced commit only converted the j1939 and proc code to this
check, while the other parts of the CAN subsystem still rely on
dev->type == ARPHRD_CAN.
The TUNSETLINK ioctl allows a down TUN/TAP device to set its hardware
type to ARPHRD_CAN while dev->ml_priv remains NULL. Such a repurposed
netdevice passes the ARPHRD_CAN checks.
Commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in
can_rx_register()") already made can_rx_register() reject such devices.
But can_rx_unregister() still only checks dev->type and dereferences
the NULL ml_priv when it walks the receive lists of the device.
CAN_ISOTP reaches this path: isotp_bind() ignores the return values of
can_rx_register() and binds the socket anyway. When the socket is
released or the device is unregistered, isotp_release() and
isotp_notify() remove the filters that have never been registered and
trigger the NULL pointer dereference in can_rx_unregister(). This only
requires owning a TUN/TAP device or CAP_NET_ADMIN in an unprivileged
user namespace.
Convert the remaining ARPHRD_CAN checks in af_can, bcm, gw, isotp and
raw to can_get_ml_priv(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: refuse a pNFS LAYOUTCOMMIT of a range without blocks
A client can commit a hole in a LAYOUTCOMMIT, because nfsd does not
check the extents against its layouts. xfs_iomap_write_unwritten() then
allocates written blocks there. A large hole overruns the block
reservation and shuts XFS down. A small one exposes stale data.
Refuse such a range with -EIO, using XFS_BMAPI_CONVERT_ONLY. |