Export limit exceeded: 413877 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10428 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98735 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free it before TX resumes. This causes use-after-free both in hci_chan_sent() and in its callers. KASAN reported: BUG: KASAN: slab-use-after-free in hci_chan_sent+0x892/0x9b0 Workqueue: hci0 hci_tx_work Call Trace: hci_chan_sent+0x892/0x9b0 hci_tx_work+0x5e6/0xb70 Allocated by task 91: hci_chan_create+0xe3/0x350 l2cap_conn_add.part.0+0x12/0xa30 l2cap_chan_connect+0x110d/0x1b60 l2cap_sock_connect+0x310/0x530 Freed by task 99: hci_chan_del+0x11f/0x170 l2cap_conn_del+0x4f1/0x800 l2cap_connect_cfm+0x88c/0xd30 hci_conn_failed+0x150/0x250 hci_abort_conn_sync+0x3e3/0x800 hci_cmd_sync_run+0x7e/0xc0 hci_abort_conn+0x105/0x1f0 disconnect_sync+0x157/0x290 hci_cmd_sync_work+0x13c/0x290 Hold the existing device mutex across channel selection and transmission in both schedulers to serialize them with channel teardown. Keep timeout handling outside the critical sections because hci_link_tx_to() acquires the same mutex. This also permits the transmit path to sleep, unlike extending the RCU read-side critical section across packet submission. | ||||
| CVE-2026-98734 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent() or while dequeuing packets and updating conn->sent. KASAN reported: BUG: KASAN: slab-use-after-free in hci_low_sent+0x730/0x840 Workqueue: hci0 hci_tx_work Call Trace: hci_low_sent+0x730/0x840 hci_sched_iso+0x25e/0x4d0 hci_tx_work+0x239/0xcb0 Allocated by task 93: __hci_conn_add+0x16f/0x1b40 hci_bind_bis+0x782/0x17b0 hci_connect_bis+0xa0/0x510 iso_sock_connect+0x589/0x1050 Freed by task 88: kfree+0x131/0x3c0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x55a/0xe80 hci_disconnect_sync+0x156/0x180 hci_abort_conn_sync+0x3e7/0x940 hci_cmd_sync_work+0x13c/0x290 Hold hci_dev_lock() across connection selection and transmission in both SCO and ISO scheduling, serializing them with connection teardown. This also prevents queuing completion timestamps after the connection queues have been purged. Extending RCU across transmission would be unsafe because the transmit path can sleep. Keep the ISO timeout check outside the mutex since hci_link_tx_to() takes it itself. The preceding channel fix already holds this mutex in the ACL and LE schedulers, which call the SCO scheduler between packets. Move the SCO body to __hci_sched_sco(), assert that its caller holds the mutex, and use it directly from these locked paths. Keep a locking hci_sched_sco() wrapper for the direct calls from hci_tx_work(). This avoids recursively acquiring the device mutex while preserving the scheduling order. Remove the obsolete claim that connection removal disables TX. | ||||
| CVE-2026-98709 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: count only matching reservations in reserved switch ieee80211_vif_use_reserved_switch() validates a replacement by counting assigned links on ctx->replace_ctx and treating reservations too broadly. A link can still be assigned to the old channel context while holding a reservation that belongs to a different replacement operation. That can make the current replacement appear complete too early. If another link finalizes first, the function can free the WILL_BE_REPLACED chanctx while the unmatched link and driver still use it, leading to a use-after-free in later beacon generation. Require an in-place reservation to point at the current replacement context, and require the reserved and assigned contexts to be the matching replacement pair, before counting or moving the link. | ||||
| CVE-2026-98699 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix mesh fast xmit path deletion UAF mesh_fast_tx_cache() stores raw mesh_path pointers. Path deletion flushes the cache and then frees the path with kfree_rcu(), but a lookup that already holds the path can insert a new cache entry after the flush. The cache then points at freed memory. Set MESH_PATH_DELETED before flushing, and skip inserting a cache entry if the path or MPP path is already deleted. Check this under the cache walk lock so it is ordered with the flush. Use WRITE_ONCE() for the deletion flag updates because the cache check reads flags without taking state_lock. | ||||
| CVE-2026-98694 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported use-after-free when request is canceled Alan reported that when doing stress testing sometimes KASAN notices use-after-free during control channel operation (stripped down keeping the relevant parts): BUG: KASAN: slab-use-after-free in tb_cfg_request_sync+0x240/0x250 [thunderbolt] Read of size 24 at addr ffff88811067f290 by task kworker/u40:2/1760 <TASK> tb_cfg_request_sync+0x240/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1760: __kmalloc_cache_noprof+0x1ee/0x550 tb_cfg_read_raw+0x1d3/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Freed by task 926: kfree+0x18f/0x4a0 tb_cfg_request_put+0xb7/0xe0 [thunderbolt] tb_cfg_request_work+0x82/0x120 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Second to last potentially related work creation: __queue_work+0x575/0xd00 queue_work_on+0x77/0x80 tb_cfg_request_cancel+0xc7/0x260 [thunderbolt] tb_cfg_request_sync+0x1f6/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 The last stack trace is helpful because it shows that we are cancelling a request and looking at tb_cfg_request_cancel() what might happen is that tb_cfg_request_work() completes right before tb_cfg_request_cancel() starts and because of this it will call schedule_work() queueing the same work to run again. However, it is already removed from the request_queue and reference count is dropped so when tb_cfg_request_work() triggers again it will access memory that is already released. Fix this so that we first make sure a cancelled request is not handed away from tb_cfg_request_find() or scheduled to run. Then instead of relying on the worker to clean up the request we will do it in tb_cfg_request_cancel() after the work is canceled from running. Make tb_cfg_request_dequeue() release the request only if it was actually removed from the queue. | ||||
| CVE-2026-98670 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via schedule_delayed_work(); that work is cleared by a devm callback. Register the devm callback before devm_request_irq() so the devres LIFO teardown frees the IRQ first, ensuring the handler can no longer queue work by the time the workqueue is cleared. Otherwise the handler could re-arm the work and run it after the xadc structure has been freed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98656 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: trigger: cancel reenable_work before freeing trigger iio_trigger_notify_done_atomic() defers ->reenable() into trig->reenable_work on the system workqueue, and the worker dereferences the owning trigger through container_of(). Nothing cancels this work before iio_trig_release() frees the trigger, so a worker armed by the last in-flight IRQ can outlive the free and touch freed memory. Cancel it at the top of iio_trig_release(), which every free path reaches through the device core's final put_device(). Found by an in-house static analysis tool. | ||||
| CVE-2026-74565 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: make nft_object rhltable per table The nft_object rhltable is global, this allows for accessing objects that are being dismangled from lookup path by other existing netns. Given the nft_obj_destroy() releases the object inmediately, this might lead to use-after-free of these objects that are being released. Make the existing rhltable per table to address this issue to deal with with the nft_rcv_nl_event() path too. Update nft_obj_lookup() to take the table as non-const, otherwise, compiler complains when passing the objname_ht to rhltable_lookup(). | ||||
| CVE-2026-74529 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-72404 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) immediately after synchronize_net() without closing the socket first (or waiting after closing it) leaves a window where a concurrent receiver (tipc_udp_recv()) could start after synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs. To fix this, we must defer dst_cache_destroy() and kfree(ub) until after we have ensured that no more readers can see the bearer/socket and all existing readers have finished: 1. Defer rcast entry destruction (both dst_cache_destroy() and kfree()) to an RCU callback using call_rcu_hurry(). Using call_rcu_hurry() ensures the dst entries are released quickly. 2. Release the bearer socket using udp_tunnel_sock_release() (stops new receive readers). 3. Call synchronize_net() to wait for all outstanding RCU readers (both transmit and receive) to finish. 4. Now that it is safe, call dst_cache_destroy() on the main bearer cache, and free ub. Note: 3) and 4) can be changed later in net-next to also use call_rcu_hurry() and get rid of the synchronize_net() latency. | ||||
| CVE-2026-53281 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid NULL pointer dereference or refcount corruption Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE") fixed a NULL pointer dereference in an unlikely situation partly. If dev_pasid is not found in the dev_pasids list, it remains NULL. However, the teardown operations are executed unconditionally, this lead to a NULL pointer dereference or refcount corruption. If the domain was never attached to this IOMMU, info will be NULL, which would cause an immediate dereference when checking --info->refcnt. Even if info is not NULL, decrementing the refcount without having removed a valid PASID might unbalance the count. This could lead to premature dropping of the refcount to 0, potentially causing a use-after-free for the remaining active devices sharing the domain. Fix it by returning early if dev_pasid is NULL, before executing the teardown operations. Issue found by AI review and suggested by Kevin Tian. https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com | ||||
| CVE-2026-83886 | 1 Microsoft | 11 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 8 more | 2026-10-21 | 7 High |
| Use after free in Windows Update Orchestrator Service allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83900 | 1 Microsoft | 12 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 9 more | 2026-10-21 | 7 High |
| Use after free in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-98862 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix exe mark UAF in kill_rules() kill_rules() removes mixed AUDIT_DIR and AUDIT_EXE rules when an audit tree is pruned. It drops entry->rule.exe before removing the rule from the RCU-visible filter lists. After a rule has been installed with AUDIT_ADD_RULE, which requires CAP_AUDIT_CONTROL, removing the watched directory can race with another task that is still evaluating the rule. In that case, fsnotify can free the executable mark before the reader reaches audit_mark_compare(), causing a use-after-free. KASAN reports: BUG: KASAN: slab-use-after-free in audit_mark_compare+0x8d/0xa0 Unlink the published rules from the RCU-visible lists and retain them on tree->rules for cleanup. If any rule has an executable mark, wait for a single RCU grace period before removing the marks and scheduling the entries for freeing. Otherwise, call_rcu() already provides the required deferred freeing without a synchronous wait. | ||||
| CVE-2026-98859 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: stop the release timer from being rearmed on remove mt_remove() quiesces the sticky-finger timer before stopping the hardware: timer_delete_sync(&td->release_timer); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); hid_hw_stop(hdev); timer_delete_sync() waits for a running callback and dequeues the timer, but it does not stop the timer from being armed again. The transport is still delivering reports at that point, and the report path rearms it: if (app->quirks & MT_QUIRK_STICKY_FINGERS) { if (td->mt_io_flags & MT_IO_SLOTS_MASK) mod_timer(&td->release_timer, jiffies + msecs_to_jiffies(100)); A report that arrives after timer_delete_sync() has returned therefore leaves the timer queued. td is allocated with devm_kzalloc() against hdev->dev, so it is freed when the driver is unbound, after mt_remove() returns. When the timer fires afterwards, mt_expired_timeout() dereferences the freed td: struct mt_device *td = timer_container_of(td, t, release_timer); struct hid_device *hdev = td->hdev; if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags)) Simply moving the teardown after hid_hw_stop() does not fix this on its own, because mt_expired_timeout() calls mt_release_contacts(), which walks hdev->inputs; the timer still has to be quiesced before hid_hw_stop() tears the input devices down. Use timer_shutdown_sync() instead, which additionally makes any later mod_timer() a no-op, so neither ordering constraint has to be traded off against the other. This is the final-teardown pattern the function was introduced for, and hid-wiimote already uses it for the same reason. | ||||
| CVE-2026-98855 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references. | ||||
| CVE-2026-98852 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: extend IPv6 exthdr detection of tunneled packets Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive branches on skb->encapsulation. This did not yet address all paths: 1. With skb->encapsulation set, the outer header is not checked. IPv6 tunnels such as ip6_gre and ip6_tunnel add an outer Destination Options header by default (encap_limit). Their GSO packets skip software GSO, then skb_csum_hwoffload_help() sees the outer extension header and calls skb_checksum_help() on the GSO skb, which warns and drops it. 2. Tunnels over IPv6 without an outer transport header, such as ip6_tunnel, leave skb->transport_header at the inner transport header. skb_network_header_len() then spans the outer IPv6, tunnel and inner IP headers, a false positive. 3. UDP tunnels without an inner network header, such as SCTP-in-UDP or PSP, have no inner IPv6 header to check. Decide on the outer header alone. 4. Directly dereferencing inner_ip_hdr(skb)->version without skb_header_pointer() is unsafe. Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if set, on the inner IPv6 header. Read the headers with skb_header_pointer(). Keep the skb_network_header_len() check when !skb->encapsulation to also catch encapsulated packets without skb->encapsulation (e.g., virtio). Use the same helper in skb_csum_hwoffload_help(). Its open coded test has the false positive of (2) and ignores the inner header. Background: checksum offload of tunneled packets invariants: Non-GSO skb: - If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes the outer checksum in software and the device offloads only the inner L4 checksum. - If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP, Remote Checksum Offload), the device offloads the outer UDP or GRE checksum instead. GSO skb: - A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM computes both inner and outer checksums per segment. The outer checksum is seeded with only the pseudo-header checksum. A NETIF_F_IPV6_CSUM device must parse through the outer headers to reach the inner ones. | ||||
| CVE-2026-98846 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: check RCV_SHUTDOWN after the sendmsg connect wait sctp_wait_for_connect() drops the socket lock while it sleeps. An out-of-the-blue ABORT can then be processed from the socket backlog and unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets RCV_SHUTDOWN, the waiter breaks with err == 0 before checking asoc->base.dead. Its final sctp_association_put() can then free the association, leaving sctp_sendmsg_to_asoc() to continue with a dangling pointer. Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc() before using the association again. The check only accesses the socket, so it needs no additional association reference. Return the existing -ESRCH so that sctp_sendmsg() skips freeing a new association that may already have been destroyed. Keep sctp_wait_for_connect() unchanged to preserve its behavior for the connect() caller. | ||||
| CVE-2026-98840 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF The reload of 'vc' added by commit 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") sits after the 'if (ret)' block, so the copy-failure break path exits the loop without reloading vc. If the vc was kfree()'d via vc_port_destruct during the unlocked copy_from_user() window, the post-loop 'if (written && vc) vcs_scr_updated(vc)' is reached with a stale non-NULL vc. The '&& vc' guard from commit a287620312dc ("vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write") only handles the NULL case, not this stale-non-NULL case; vcs_notifier() then reads param->vc->vc_num from freed memory: BUG: KASAN: slab-use-after-free in vcs_notifier+0x7c/0xd0 Read of size 2 at addr ffff888007149190 Call Trace: vcs_notifier+0x7c/0xd0 atomic_notifier_call_chain+0x70/0xa0 vcs_scr_updated+0x77/0xa0 vcs_write+0x71b/0x7e0 Allocated by task: vc_allocate -> con_install -> tty_open Freed by task: kfree <- vt_ioctl (VT_DISALLOCATE -> vc_port_destruct) Move the reload to immediately after console_lock(), before 'if (ret)', so every break path below passes a fresh vc to the post-loop vcs_scr_updated(). | ||||
| CVE-2026-98837 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: unregister the input device when probe fails setup_card() registers the input device, whose name and phys point into struct snd_usb_caiaqdev, and then goes on to snd_card_register() and snd_usb_caiaq_control_init(). If either fails, snd_probe() calls snd_card_free(), which frees the device state but leaves the input device registered: card_free() only clears the pointer, and the input device is unregistered from snd_disconnect() alone. Reading its "uevent" attribute afterwards dereferences freed memory: BUG: KASAN: slab-use-after-free in string+0x4a9/0x4f0 Read of size 1 at addr ffff8880208f5043 by task caiaq/4967 add_uevent_var+0x183/0x3a0 input_dev_uevent+0x162/0x900 dev_uevent+0x2f1/0x870 uevent_show+0x1ca/0x3a0 ... Unregister the input device on the probe error path, as snd_disconnect() does. snd_usb_caiaq_input_disconnect() is a no-op when no input device was registered. Reproduced with a raw-gadget Audio Kontrol 1 and a temporary hack that makes snd_usb_caiaq_control_init() fail. | ||||