| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: fix potential skb->frags overflow in RX path
When receiving data in the DPMAIF RX path,
the t7xx_dpmaif_set_frag_to_skb() function adds
page fragments to an skb without checking if the number of
fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow
in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and
potentially causing kernel crashes or other undefined behavior.
This issue was identified through static code analysis by comparing with a
similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76:
fix array overflow on receiving too many fragments for a packet").
The vulnerability could be triggered if the modem firmware sends packets
with excessive fragments. While under normal protocol conditions (MTU 3080
bytes, BAT buffer 3584 bytes),
a single packet should not require additional
fragments, the kernel should not blindly trust firmware behavior.
Malicious, buggy, or compromised firmware could potentially craft packets
with more fragments than the kernel expects.
Fix this by adding a bounds check before calling skb_add_rx_frag() to
ensure nr_frags does not exceed MAX_SKB_FRAGS.
The check must be performed before unmapping to avoid a page leak
and double DMA unmap during device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec
nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU
length or offset exceeds sg_cnt and then use bogus sg->length/offset
values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining
entries, and sg->length/offset before building the bvec. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: return the handler error from mon_handle_auth_done()
Currently any error from ceph_auth_handle_reply_done() is propagated
via finish_auth() but isn't returned from mon_handle_auth_done(). This
results in higher layers learning that (despite the monitor considering
us to be successfully authenticated) something went wrong in the
authentication phase and reacting accordingly, but msgr2 still trying
to proceed with establishing the session in the background. In the
case of secure mode this can trigger a WARN in setup_crypto() and later
lead to a NULL pointer dereference inside of prepare_auth_signature(). |
| SGLang through 0.5.22 with the Mooncake disaggregation backend accepts unauthenticated decode registration messages on the Prefill rank ZMQ PULL socket, allowing denial of service. Network-adjacent attackers can send many registrations with unique mooncake_session_id values and large nested-buffer frames to exhaust Prefill memory until the scheduler is OOM-killed. |
| BentoML through 1.4.39 contains a Dockerfile instruction injection vulnerability that allows attackers to add arbitrary build instructions by embedding newlines in docker.env mapping keys rendered by the legacy base.j2 template. Attackers can supply a crafted bentofile.yaml or imported bento archive so that bentoml containerize executes injected RUN instructions during docker build, accessing build secrets and poisoning images. |
| A flaw has been found in FusionPBX up to 5.4.4/5.5.7/5.6.5. The affected element is an unknown function of the file app/dialplans/resources/classes/dialplan.php of the component Dialplan Editor. Executing a manipulation can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in satya-vinay Events-Management-System up to 437c77ceb69bf9fe2e3f4f46f7871b83f425383a. Affected by this vulnerability is an unknown functionality of the file dodelete.php of the component Registration-Delete Handler. Such manipulation of the argument ID leads to sql injection. The attack can be executed remotely. The exploit is publicly available and might be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| cgltf through 1.15 contains a heap out-of-bounds write vulnerability in cgltf_accessor_unpack_floats() that allows attackers to write outside the output buffer via unchecked sparse accessor indices. Attackers can supply a crafted glTF or GLB file with large sparse indices to corrupt heap memory, crash applications, and potentially execute code when cgltf_validate() is not called. |
| NoteGen through 0.38.3 contains an external control of file path vulnerability in chat image analysis that allows attackers to read local image files via unvalidated synced sourceUrl paths. Attackers with write access to the victim's sync target can plant absolute paths or file:// URLs, causing image_inspect to send local images to the AI provider. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reservation leak in some error paths when inserting inline extent
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Free sp in error path to fix system crash
System crash seen during load/unload test in a loop,
[61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X.
[61110.467494] =============================================================================
[61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown()
[61110.467501] -----------------------------------------------------------------------------
[61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1
[61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023
[61110.467515] Call Trace:
[61110.467516] <TASK>
[61110.467519] dump_stack_lvl+0x34/0x48
[61110.467526] slab_err.cold+0x53/0x67
[61110.467534] __kmem_cache_shutdown+0x16e/0x320
[61110.467540] kmem_cache_destroy+0x51/0x160
[61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280
[61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0
[61110.467616] ? do_syscall_64+0x5c/0x90
[61110.467619] ? exc_page_fault+0x62/0x150
[61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[61110.467626] </TASK>
[61110.467627] Disabling lock debugging due to kernel taint
[61110.467635] Object 0x0000000026f7e6e6 @offset=16000
[61110.467639] ------------[ cut here ]------------
[61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160
[61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1
[61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023
[61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160
[61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89
[61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282
[61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027
[61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0
[61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7
[61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000
[61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000
[61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0
[61110.467736] PKRU: 55555554
[61110.467737] Call Trace:
[61110.467738] <TASK>
[61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280
Free sp in the error path to fix the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: add VLAN id validation before using
Currently, the VLAN id may be used without validation when
receive a VLAN configuration mailbox from VF. The length of
vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause
out-of-bounds memory access once the VLAN id is bigger than
or equal to VLAN_N_VID.
Therefore, VLAN id needs to be checked to ensure it is within
the range of VLAN_N_VID. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-usb: dtv5100: fix out-of-bounds in dtv5100_i2c_msg()
rlen value is a user-controlled value, but dtv5100_i2c_msg() does not
check the size of the rlen value. Therefore, if it is set to a value
larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data.
Therefore, we need to add proper range checking to prevent this vuln. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: use rc_pageoff for memcpy byte offset
svc_rdma_copy_inline_range added rc_curpage (page index) to the page
base instead of the byte offset rc_pageoff. Use rc_pageoff so copies
land within the current page.
Found by ZeroPath (https://zeropath.com) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
In the DSP event handling code, a put_user() loop copies event data.
When the user buffer size is not aligned to 4 bytes, it could overwrite
beyond the buffer boundary.
Fix by adding a bounds check before put_user(). |
| A vulnerability was detected in D-Link E15, M32, R15 and R32. This issue affects some unknown processing of the file /etc/emDaemon/passwd of the component MQTT Broker. The manipulation results in hard-coded credentials. It is possible to launch the attack remotely. The exploit is now public and may be used. |
| A weakness has been identified in vraj404 Criminal Management System up to 2808d057e7ddc5295519a487365b0cacfd0ba8c4. Affected by this vulnerability is an unknown functionality of the file home.php of the component Submission Form. This manipulation of the argument id/name/offName/crime/dob/arrDate/crimeDate/sex/address/folder/more causes sql injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. |
| Television (tv) 0.15.0 through 0.15.9 contains an OS command injection vulnerability that allows attackers to run shell commands through improperly escaped single quotes in format_command. Attackers can plant a file with a crafted name containing an apostrophe so that triggering an action like the default edit action executes commands with victim privileges. |
| SGLang through 0.5.22 with the Mooncake disaggregation backend contains an uncontrolled memory allocation vulnerability in handle_staging_rsp() that lets unauthenticated network-adjacent attackers exhaust Prefill memory. Attackers can obtain the rank address from the /route endpoint and send STAGING_RSP messages with huge chunk_idx values under fresh room IDs, causing the scheduler to be OOM-killed. |
| Camunda 7.24.0 before 7.24.14 and 7.23.0 before 7.23.17 contains an expression injection vulnerability where AdhocQueryValidator.validate() fails to check sub-query expression maps within the orQueries field exposed by TaskQueryDto, allowing authenticated users to bypass the enableExpressionsInAdhocQueries restriction. Attackers can supply a malicious JUEL expression such as dueAfterExpression inside an orQueries entry to achieve arbitrary Java reflection and invoke java.lang.Runtime.exec, resulting in operating-system command execution as the engine service user. |
