| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HAProxy 3 before 3.4.6 allows a remote unauthenticated attacker to cause a denial of service (persistent worker-thread CPU exhaustion) via an HTTP/1.1 chunked request. Although the H1 multiplexer drains the request before closing the stream, the parser repeatedly re-processes the same bytes without making progress. The affected thread stays busy at 100% CPU after timeouts expire and after the client disconnects, and repeated requests can consume all worker threads until the process is restarted. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.1, calling PdfWriter.find_outline_item on a crafted PDF with a cyclic outline hierarchy can enter an infinite loop and block the current process. This issue is fixed in version 6.20.1. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.1, removing an object from a crafted cyclic PDF tree, such as an outline item, can enter an infinite loop and block the current process. This issue is fixed in version 6.20.1. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.0, an attacker can craft an incomplete PDF that ends inside a standard cross-reference table, causing pypdf to mishandle the unexpected end of file and enter an infinite loop. This issue is fixed in version 6.20.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, the TarIO initializer in src/PIL/TarIO.py accepts a negative octal member size and computes a backward seek that returns to the same 512-byte header. When the requested member name does not match, the parser repeatedly reads that header, consumes a full CPU core, and never returns. TarIO is reached only when an application directly uses PIL.TarIO.TarIO rather than the default Image.open() path. This issue is fixed in version 13.0.0. |
| Dulwich before 1.2.9 contains a denial of service vulnerability in Pack.resolve_object that allows attackers to cause infinite recursion via self-referential OFS_DELTA objects. Attackers can supply a malicious packfile with an OFS_DELTA delta_offset of 0 to exhaust CPU during clone, fetch, or cat-file operations. |
| The GUIX software JPEG decoder reads four kinds of marker segment without checking that each is long enough to hold what it reads. A truncated segment is therefore read past the end of the caller's image buffer. Separately, a zero chroma sampling factor makes the block decode loop non-terminating. Both reproduce in the default configuration, in which `GX_SOFTWARE_DECODER_SUPPORT` is enabled. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the detection engine to unexpectedly restart, resulting in a denial of service (DoS) condition.
The vulnerability is due to a flaw in logic handling when General Packet Radio Service (GPRS) Tunneling Protocol (GTP) extension headers are processed within the codec. An attacker could exploit this vulnerability by sending a crafted, fragmented UDP datagram that contains these headers to the Snort 3 Detection Engine of an affected device. A successful exploit could allow the attacker to cause the detection engine to enter an infinite loop, resulting in a DoS condition. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 NetFlow Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.
This vulnerability is due to incomplete error checking when Snort 3 parses UDP Netflow Protocol packets. An attacker could exploit this vulnerability by sending a single crafted Netflow packet through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a DoS condition. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent tailcall infinite loop caused by freplace
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Update last skb marker in manage_oob().
Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU
due to OOB skb.
In the following cases, manage_oob() skips OOB skb(s) and returns
NULL for the last recv(MSG_PEEK):
socketpair(AF_UNIX, SOCK_STREAM, 0, sk);
1) skb -> OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
2) skb -> consumed OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
3) consumed OOB skb -> OOB skb -> NULL
send(sk[0], "a", 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_OOB);
send(sk[0], "b", 1, MSG_OOB);
recv(sk[1], buf, 1, MSG_PEEK);
Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer,
or non-OOB skb is not yet consumed), and unix_stream_data_wait() is
called.
However, it returns immediately because @last is not updated in
unix_stream_read_generic(), and the thread busy-waits for a new skb.
Let's update @last in manage_oob().
For MSG_PEEK, @last is updated with the skipped OOB, and for the
non-peek case, @last matches the returned value (when !copied)
because OOB is unlinked.
Note that manage_oob() is inlined and no stack canary is added. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature
qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll
rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide
whether the next continuation IOCB has arrived, spinning on cpu_relax()
without advancing the ring or decrementing the entry count while it has
not. response_t::signature lives at byte offset 60, but a continuation
IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame
payload at that offset (data[56..59]). A received frame whose payload
bytes happen to equal 0xDEADDEAD is therefore misread as "not yet
arrived", and the loop spins forever in interrupt/DPC context, causing a
CPU soft lockup.
The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt()
(PT_LS4_UNSOL and the NVMe purls path) already gate on
qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are
present before copying begins. The sibling helper
__qla_copy_purex_to_buffer() already drops the signature poll and relies
on the entry_type == STATUS_CONT_TYPE guard instead.
Remove the signature busy-wait from both helpers, keeping the entry_type
guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers
and re-processes on the next interrupt once all continuation IOCBs have
arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the
signature field is never read on a continuation IOCB, eliminating the
payload-aliasing lockup. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845
On NPCM845, when a target on the I3C bus gets stuck holding SDA low,
the controller reports a false Master Request (MR) in-band interrupt
event. The driver handles this by emitting a STOP condition to restore
the bus.
However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that
emitting a STOP condition may spuriously set the SLVSTART interrupt
status bit. In the Master Request case, this creates a feedback loop:
the STOP triggers a new SLVSTART event, the IRQ handler fires again,
the controller still reports an MR type, another STOP is emitted, and
the cycle repeats indefinitely, resulting in an IRQ storm that can lock
up the CPU.
Clear the SLVSTART status bit explicitly after emitting the STOP in the
Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk
is set. This breaks the feedback loop without affecting normal SLVSTART
processing, which is already guarded in the top-level IRQ handler by
checking that MSTATUS is in SLVREQ state. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix handling of damaged volume in exfat_create_upcase_table()
When the size of the upcase table is set to zero in the dentry for any
reason(e.g. corrupted media or misbehaving device), an integer overflow
causes the module to loop indefinitely.
If the size of the upcase table is read zero, do not attempt to load the
table. Instead, fallback to loading the default upcase table. If the
size of the upcase table is zero or no upcase table is found, raise
exfat_fs_error() to mark the volume read-only. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx
The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout
interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT
(0x0c) but LSR.DR is clear. A character timeout is only cleared by
reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is
set, so nothing ever clears the condition. The interrupt is
level-triggered and re-fires immediately, so on a single-core ARM926
the resulting interrupt storm livelocks the CPU.
It is reproducible when userspace repeatedly opens the front-panel port
(ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and
the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping
the soft-lockup detector in serial8250_handle_irq_locked().
LPC32xx has no dedicated 8250 glue driver, it's driven by the generic
8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up
in of_platform_serial_setup() the same way fsl8250_handle_irq is
installed. The handler follows dw8250_handle_irq(): on an RX timeout
with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR
read to clear the condition, then calls serial8250_handle_irq_locked().
No real received data is ever discarded, and it is a no-op on healthy
UARTs which never report a timeout with DR clear.
This is the same class of bug already worked around in other 8250 drivers;
see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt")
which reports the identical iir=0xcc/lsr=0x60. See also
UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/mst: limit DP MST ESI service loop
The loop in intel_dp_check_mst_status() keeps servicing interrupts
originating from the sink without bound. Add an upper bound to the new
interrupts occurring during interrupt processing to not get stuck on
potentially stuck sink devices. Use arbitrary 32 tries to clear incoming
interrupts in one go.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Note: The condition likely pre-dates the commit in the Fixes: tag, but
this is about as far back as a backport has any chance of
succeeding. Before that, the retry had a goto.
(cherry picked from commit b4ea5272133059acb493cc36599071a9e852ec2e) |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/napi: cap busy_poll_to 10 msec
Currently there's no cap on the maximum amount of time that napi is
allowed to poll if no events are found, which can lead to kernel
complaints on a task being stuck as there's no conditional rescheduling
done within that loop.
Just cap it to 10 msec in total, that's already way above any kind of
sane value that will reap any benefits, yet low enough that it's
nowhere near being able to trigger preemption complaints. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph_cap_reclaim_work() re-queues itself for as long as
ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease
walk exhausts its `nr_to_scan` budget. This creates a busy loop that
consumes CPU without making any progress when there is nothing to
reclaim: with no cap pressure (`count==0`) and every scanned lease
still valid, each pass runs the full scan budget down to zero and
returns `-EAGAIN`, only to be queued again immediately.
The dir-lease walk made this worse. When `expire_dir_lease` is
`false` (i.e. we have no intention of reclaiming dir leases),
__dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH`
moves the dentry to the tail of the list and resets `di->time` via
__dentry_dir_lease_touch(), so a walk over N valid leases pointlessly
rewrote the list, refreshed the timestamps (preventing them from ever
aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN`
requeue.
Fix this in three steps:
- Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is
`false`. If we are not going to reclaim the lease, leave it in
place instead of churning the list and resetting its timestamp; the
walk then terminates naturally (or via `STOP` at the first fresh
lease).
- Only return `-EAGAIN` from the first (dentry-lease) walk when something
was actually freed. A full batch that frees nothing means retrying
the same list immediately is futile; fall through to the dir-lease
walk instead.
- After both walks, bail out with success (0) when nothing was freed
and there is no cap pressure (`count==0`). There is no reason to
keep retrying when we are not over the cap limit and made no
progress.
Under real cap pressure (`count>0`) the reclaim path is unchanged and
still retries via `-EAGAIN`.
Without this patch, I saw 500 ceph_trim_dentries() calls per second on
our web servers. This is very visible in `/proc/lock_stat` (5 minute
capture):
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00
-----------------------
&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
&mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
-----------------------
&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
With this patch:
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27
-----------------------
&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 1
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: bound shrinker scans by examined checkpoint buffers
The jbd2 shrinker currently accounts only checkpoint buffers that it
successfully releases against nr_to_scan. Busy buffers therefore do not
consume the scan budget.
If a checkpoint transaction contains mostly busy buffers, the shrinker
can scan its entire checkpoint list while holding journal->j_list_lock.
Large checkpoint lists can result in excessive lock hold times and leave
other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls.
Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for
every buffer examined, including busy buffers. Pass NULL from checkpoint
cleanup paths so their existing full-list behavior is preserved.
This restores the scan-budget semantics that existed before
journal_shrink_one_cp_list() was changed to always scan a complete
checkpoint list. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
uart_write_room() and uart_write() behave inconsistently when
xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were
never properly initialized):
- uart_write_room() returns kfifo_avail() which can be > 0
- uart_write() checks xmit_buf and returns 0 if NULL
This inconsistency causes an infinite loop in drivers that rely on
tty_write_room() to determine if they can write:
while (tty_write_room(tty) > 0) {
written = tty->ops->write(...);
// written is always 0, loop never exits
}
For example, caif_serial's handle_tx() enters an infinite loop when
used with PORT_UNKNOWN serial ports, causing system hangs.
Fix by making uart_write_room() also check xmit_buf and return 0 if
it's NULL, consistent with uart_write().
Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 |
