| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in luksmeta. Improper boundary validation of metadata slots allows an attacker capable of supplying or modifying a disk header to redirect wipe or load operations outside the intended metadata area. An attacker could exploit this vulnerability by providing a crafted header with valid checksums to overwrite or zero out encrypted payload data, resulting in persistent data loss and corrupted storage. Exploitation typically requires privileged access to modify raw block devices or the ability to induce an administrator to process an untrusted disk image. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
The original implementation caused an out-of-bounds memory access
in the sdw_add_element_group_count for-loop when i == num.
for (i = 0; i <= num; i++) {
if (rate == group->rates[i] && lane == group->lanes[i])
...
To fix this error, the function now checks for existing rate/lane
entries in the group(a function parameter) using a for-loop before
adding them.
No functional changes apart from this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate extension-frame layout before RX
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation
I have been observing a number of systems aborting at
insert_dev_extents() in btrfs_create_pending_block_groups(). The
following is a sample stack trace of such an abort coming from forced
chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this
can theoretically happen to any DUP chunk allocation.
[81.801] ------------[ cut here ]------------
[81.801] BTRFS: Transaction aborted (error -17)
[81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319
[81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk
[81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE
[81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs]
[81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282
[81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000
[81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0
[81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007
[81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000
[81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000
[81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000
[81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0
[81.810] Call Trace:
[81.810] <TASK>
[81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs]
[81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs]
[81.811] kernfs_fop_write_iter+0x15f/0x240
[81.812] vfs_write+0x264/0x500
[81.812] ksys_write+0x6c/0xe0
[81.812] do_syscall_64+0x66/0x770
[81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[81.813] RIP: 0033:0x7fec6be66197
[81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197
[81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001
[81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000
[81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002
[81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0
[81.817] </TASK>
[81.817] irq event stamp: 20039
[81.818] hardirqs last enabled at (20047): [<ffffffff99a68302>] __up_console_sem+0x52/0x60
[81.818] hardirqs last disabled at (20056): [<ffffffff99a682e7>] __up_console_sem+0x37/0x60
[81.819] softirqs last enabled at (19470): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0
[81.819] softirqs last disabled at (19463): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0
[81.820] ---[ end trace 0000000000000000 ]---
[81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already exists
Inspecting these aborts with drgn, I observed a pattern of overlapping
chunk_maps. Note how stripe 1 of the first chunk overlaps in physical
address with stripe 0 of the second chunk.
Physical Start Physical End Length Logical Type Stripe
----------------------------------------------------------------------------------------------------
0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/2
0x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2
Now how could this possibly happen? All chunk allocation is
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate sequence number of TX release report
Hardware rarely reports abnormal sequence number in TX release report,
which will access out-of-bounds of wd_ring->pages array, causing NULL
pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U
6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1)
Call Trace:
<IRQ>
rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)]
rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)]
net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759
handle_softirqs+0xbe/0x290 kernel/softirq.c:601
? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)]
__local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423
</IRQ>
<TASK>
rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)]
? irq_thread+0xa7/0x340 kernel/irq/manage.c:0
irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314
? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202
? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220
kthread+0xea/0x110 kernel/kthread.c:376
? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287
? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
To prevent crash, validate rpp_info.seq before using. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix 22000 series SMEM parsing
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ioam6: fix OOB and missing lock
When trace->type.bit6 is set:
if (trace->type.bit6) {
...
queue = skb_get_tx_queue(dev, skb);
qdisc = rcu_dereference(queue->qdisc);
This code can lead to an out-of-bounds access of the dev->_tx[] array
when is_input is true. In such a case, the packet is on the RX path and
skb->queue_mapping contains the RX queue index of the ingress device. If
the ingress device has more RX queues than the egress device (dev) has
TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues.
Add a check to avoid this situation since skb_get_tx_queue() does not
clamp the index. This issue has also revealed that per queue visibility
cannot be accurate and will be replaced later as a new feature.
While at it, add missing lock around qdisc_qstats_qlen_backlog(). The
function __ioam6_fill_trace_data() is called from both softirq and
process contexts, hence the use of spin_lock_bh() here. |
| A HID report descriptor is a sequence of items, each declaring in its header how many data bytes follow. The USBX host walks that sequence by advancing over each header and parsing the data behind it.
The walk checked that an item fitted in the descriptor only **after** it had advanced past the header and parsed the payload, and the item analysis it relied on never measured the declared sizes against the bytes actually received. A HID peripheral returning a short report descriptor therefore drove a heap out-of-bounds read during ordinary enumeration. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: validate free block extents against the partition length
udf_free_blocks() checks the logical block number and count against the
partition length, but drops the extent offset from that final bound. A
crafted extent can pass the guard while logicalBlockNum + offset + count
points past the partition, which later indexes past the space bitmap
array.
A single ftruncate(2) on a file backed by such an extent reliably
panics the kernel. This is a local availability issue. On desktop
systems where UDisks/polkit allows the active user to mount removable
UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply
the crafted filesystem and trigger the panic by truncating a writable
file on it. Systems that require root or CAP_SYS_ADMIN to mount the
image have a higher prerequisite.
No confidentiality or integrity impact is claimed: the reproduced
primitive is an out-of-bounds read of a bitmap pointer slot followed by
a kernel panic.
Use the already computed logicalBlockNum + offset + count value for the
partition length check. Also make load_block_bitmap() reject an
out-of-range block group before indexing s_block_bitmap[], so corrupted
callers cannot walk past the flexible array. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Check PSC request indices against the actual size of the buffer
When processing Page State Change (PSC) requests, validate the PSC buffer
against the effective size of the scratch area, which could be less than
the maximum size if the guest provided a pointer that isn't exactly at the
start of the GHCB shared buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries
When a bundle recv retries inside io_recv_finish(), the merge logic OR
the saved cflags from the previous iteration with the cflags returned by
the new iteration:
cflags = req->cqe.flags | (cflags & CQE_F_MASK);
Bits listed in CQE_F_MASK are inherited from the new iteration, and all
other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the
saved cflags. Before this change CQE_F_MASK covered only
IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE.
When using provided buffer rings (IOU_PBUF_RING_INC) with incremental
mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring
entry partially consumed, __io_put_kbufs() then sets
IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the
buffer ID will be reused for subsequent completions.
Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above
silently dropped it whenever the final retry iteration partially
consumed the buffer, and the subsequent req->cqe.flags = cflags &
~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the
carried-over cflags had one been present. Userspace would then
wrongfully advance it ring head past an entry the kernel still uses.
Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the
new iteration into the user-visible CQE and stripped from the saved
cflags between iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate block number from NFS file handle in isofs_export_iget
isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker-
controlled block number (ifid->block or ifid->parent_block) from
the NFS file handle to isofs_export_iget(), which only rejects
block == 0 before calling isofs_iget() and ultimately sb_bread().
A crafted file handle with fh_len sufficient to pass the check
added by commit 0405d4b63d08 ("isofs: Prevent the use of too small
fid") can still drive the server to read any in-range block on the
backing device as if it were an iso_directory_record. That earlier
fix was assigned CVE-2025-37780.
sb_bread() on an out-of-range block returns NULL cleanly via the
EIO path, so there is no memory-safety violation. For in-range
reads of adjacent-partition data on the same block device, the
unrelated bytes end up in iso_inode_info fields that reach the NFS
client as dentry metadata. The deployment surface (isofs exported
over NFS from loop-mounted images) is narrow and requires an
authenticated NFS peer, but the malformed-file-handle class is
reportable as hardening next to the existing CVE-2025-37780 fix.
Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so
the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent()
call sites with a single line. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: validate reply type before using icmp_pointers
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: validate bsscfg indices in IF events
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
[add missing wifi prefix] |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject non-negative offsets in stack_slot_obj_get_spi()
bpf_get_spi() computes (-off - 1) / BPF_REG_SIZE using C division,
which truncates toward zero. For off == 0, this produces spi 0, the
same index used by the valid stack slot at fp-8.
stack_slot_obj_get_spi() currently checks alignment and the resulting
spi bounds, but does not reject the non-negative offset itself. It can
therefore validate a PTR_TO_STACK register holding fp+0 against an
iterator stored at fp-8 even though the runtime receives the actual fp+0
pointer. An effectful iterator kfunc can then interpret memory outside
the BPF stack as iterator state.
Reject non-negative offsets before converting the offset to an spi. All
valid stack objects begin at a negative offset from the frame pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fix condition in 'nand_select_target()'
'cs' here must be in range [0:nanddev_ntargets[. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential null-ptr-deref in decode_choose_args()
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an
array of max_buckets CRUSH buckets is decoded, where some indices may
not refer to actual buckets and are therefore set to NULL. The received
CRUSH map may optionally contain choose_args that get decoded in
decode_choose_args(). When decoding a crush_choose_arg_map, a series of
choose_args for different buckets is decoded, with the bucket_index
being read from the incoming message. It is only checked that the bucket
index does not exceed max_buckets, but not that it doesn't point to an
index with a NULL bucket. If a (potentially corrupted) message contains
a crush_choose_arg_map including such a bucket_index, a null pointer
dereference may occur in the subsequent processing when attempting to
access the bucket with the given index.
This patch fixes the issue by extending the affected check. Now, it is
only attempted to access the bucket if it is not NULL. |
